Parts for Ge JVX3300DJ2BB: Range Hood Parts

This activated charcoal filter is used in recirculating microwave ventilation to absorb cooking odors and vapors as air is returned to the room, helping keep kitchen air fresher and maintaining effective vent performance. What it does:

• Adsorbs cooking odors when the microwave is set to recirculate (non-vented installation)
• Helps maintain airflow by replacing a saturated filter
• Common symptoms of a spent filter: lingering odors, reduced vent performance, darkened or deteriorating filter media

• 1 charcoal filter

• Disconnect power before servicing
• Remove the upper grille to access the filter; retain mounting screws
• Note and match the filter's orientation/airflow markings during installation
• Do not wash or reuse charcoal filters; replace when saturated

This grease filter sits in the ventilation path to catch grease and cooking residue before it reaches the fan and ductwork. Replacing a clogged or damaged filter helps restore airflow and keeps your vent system cleaner.

• Captures grease and airborne particles to protect the blower, motor, and cabinetry
• Supports proper airflow through the vent system for effective smoke and steam capture
• Replace when the mesh is torn, warped, missing, or heavily saturated
• Symptoms include lingering odors/smoke, reduced venting performance, or a filter that won't stay seated

• Disconnect power to the appliance before servicing
• Allow surfaces to cool; wear gloves—filter edges can be sharp
• Release the latch or fastener, slide out the old filter, and install the new one in the same orientation
• Do not operate the vent without a grease filter installed

Replace a worn range hood control with this light and blower switch. It restores reliable on/off control of the hood's lamp and fan so you can cook with proper lighting and ventilation.

• Controls electrical power to the hood's light circuit
• Switches the blower on and off for ventilation control
• Common symptoms: light or fan won't turn on/off, intermittent operation, or a switch that sticks or feels loose
• Internal contacts can wear from heat, moisture, and repeated use

• Disconnect power at the breaker or unplug the hood before servicing
• Remove the control panel/cover to access the switch; note wire positions or take a photo
• Transfer wires one at a time to the new switch and ensure connectors are fully seated
• Reinstall the switch and panel, restore power, and test light and blower

The lamp cover is an OEM part for GE range hoods. It serves as a protective cover for the light bulb in your range hood, ensuring the safety of the bulb and preventing any potential damage. It is designed to withstand the heat generated by the light bulb and is easily removable for bulb replacement or cleaning.

A bad lamp cover can result in issues such as exposed light bulbs, potential damage to the bulb, or decreased lighting effectiveness in your range hood. Causes of a bad cover can include accidental breakage, wear and tear over time, or improper handling.

Symptoms of a bad lamp cover include:

• Exposed light bulb in the range hood
• Difficulty in removing or replacing the light bulb
• Reduced or dimmed lighting in the range hood
• Visible cracks or damage on the cover

Replace your worn-out or damaged lamp cover with this genuine OEM GE part to ensure the safe use of your range hood. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This microwave motor and bracket assembly restores the powered movement of the mechanism it drives. Pre-mounted on its bracket for a straightforward swap, it helps address no-movement or noisy-operation issues from a worn or failed motor.

• Provides controlled rotation/actuation for the connected internal component
• Supports proper airflow or mechanical motion as designed by the unit
• Common symptoms: hums but doesn't turn, intermittent/stalled operation, grinding/rattling noises, or the linked part not moving
• Direct-fit assembly for the specified models

• Disconnect power before servicing; if working on a microwave, be aware the high-voltage capacitor can retain a dangerous charge
• Note wiring and orientation; transfer connectors exactly as found
• Reuse existing mounting hardware as needed
• Check for free movement/obstructions before reassembly and power-up

The Range Hood Damper is an OEM part for GE range hoods. It is located inside the range hood and is responsible for regulating the exhaust venting and circulation of air. The damper is designed to open and close automatically based on temperature and venting needs, allowing excess heat, smoke, and smells to escape from the cooking area. 

Causes of a bad damper can include wear and tear over time, failure of the damper motor or mechanism, or damage that prevents proper movement. 

Symptoms of a bad damper include: 

• Inadequate or poor ventilation when cooking 
• Excess heat or smoke building up under the range hood
• Strange noises coming from the damper area
• Manual movement of the damper is difficult or hindered

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This installation hardware kit provides the mounting pieces needed to secure your appliance during installation, helping ensure panels and trim stay properly aligned for safe, stable operation. Useful when hardware is missing, loose, or damaged. What it does:

• Supplies the factory hardware used to mount and secure appliance panels, trim, or assemblies
• Replaces missing or worn fasteners that can cause panels to shift or sit unevenly
• Restores proper fit and alignment for a finished, stable installation
• Helps eliminate rattles or movement caused by broken or loose mounting parts

• Turn off and disconnect power to the appliance before servicing
• Follow the appliance installation manual and use recommended fasteners and torque where specified
• Use common hand tools; keep small parts contained to avoid loss