General Electric Range Hood Parts

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

• The refrigerator compressor fails to start.
• Unusual humming noises coming from the refrigerator.
• The refrigerator cycles on and off more frequently than normal.
• A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

The GE light switch is an OEM replacement part responsible for controlling the operation of the lights within your range or range hood. This part is typically located in the control panel of the appliance, often integrated with other control switches and knobs. The primary function of the lamp switch is to enable users to turn the lights inside the range or range hood on and off as needed.

The switch can fail due to regular wear and tear, electrical issues, or physical damage. Over time, the internal contacts can wear out, or the switch mechanism can become stuck.

Symptoms of a bad light switch include:

• The oven light not turning on when the door is opened
• The light staying on continuously, even when the door is closed
• Flickering or intermittent operation of the oven light
• No response when pressing the light button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Switch (Fan) is an OEM part for GE range hoods. It controls the operation of the fan, allowing you to adjust the ventilation speed and ensure proper airflow while cooking. This switch is essential for maintaining a comfortable and odor-free kitchen environment.

 Causes of a bad switch can include electrical failure, wear and tear from regular use, or physical damage due to impact. Ensuring the switch is functional is crucial for maintaining optimal ventilation performance.

Symptoms of a bad range hood switch include:

• The fan not turning on or off
• Difficulty in adjusting fan speeds
• The switch feeling loose or not engaging properly
• Inconsistent or intermittent fan operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Use part WB02X11325 for the nut - no longer included with the switch.

This Range Hood Fan Blade is an OEM part for GE range hoods. It is a vital component that helps circulate the air and remove smoke, odors, and cooking fumes from your kitchen. The fan blade is designed to fit securely onto the range hood motor shaft, rotating rapidly to create airflow within the hood. 

Causes of a faulty fan blade can include wear and tear over time, damage due to accumulated grease or debris, or physical impact. These factors can result in a loose or unbalanced fan blade, reduced airflow, or noisy operation of the range hood.

Symptoms of a bad fan blade may include:

• Decreased airflow or ventilation efficiency
• Excessive noise or vibration during operation
• Visible damage or deformation of the fan blade

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Charcoal Filter is an OEM part for GE microwaves. It is designed to remove odors and impurities from the air that is recirculated during microwave operation. The charcoal filter plays a crucial role in maintaining a clean and odor-free kitchen environment by trapping grease and odors from the cooking process.

You should replace the charcoal filter regularly as part of routine maintenance. Causes of a bad charcoal filter can include saturation from grease and food particles, reduced effectiveness due to prolonged use, or physical damage.

Symptoms of a bad charcoal filter include:

• Persistent odors in the kitchen
• Visible grease buildup on the filter
• Reduced ventilation efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 36" Filter is an OEM replacement part for GE range hoods and ventilation systems. It is designed to capture and remove grease, smoke, and odors from the air, ensuring a clean and fresh kitchen environment.

Symptoms of a clogged or faulty range hood filter include:

• Reduced airflow and poor ventilation performance
• Visible buildup of grease or residue on the filter surface
• Strong cooking odors lingering in the kitchen

Causes of a bad filter can range from normal accumulation of grease and grime over time, exposure to high heat or humidity, or physical damage from improper cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range hood models. 

The 30" Filter is an OEM part for GE range hoods and microwaves, specifically designed to ensure a clean and efficient ventilation system. This filter is essential for trapping grease, smoke, and cooking odors, creating a cleaner kitchen. 

Causes of a faulty 30-inch filter may vary. Grease buildup and debris reduce airflow and efficiency, while damage like bending or tearing can hamper contaminant trapping. Regular use and cleaning may weaken the filter, increasing the risk of failure.

Symptoms of a bad 30" Filter include:

• Odors or smoke lingering in the kitchen longer than usual.
• Increased noise from the ventilation system
• Visible signs of saturation or damage to the filter

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Filter is an OEM replacement part for GE built-in range hoods. It captures grease, smoke, and other cooking emissions before safely venting air outside. This filter measures approximately 23 1/2" X 6".

Causes of filter clogging generally involve accumulated residue after periods of frequent cooking. Not cleaning or replacing as use requires also accelerates blockages.

Symptoms of a blocked filter may include:

• Reduced suction power and airflow
• Difficulty seeing through a dirty filter grate
• Excessive grease buildup on interior surfaces and appliances below

This GE replacement is also compatible with brands like Hotpoint, RCA and select Kenmore hoods

The Lens Cover is an OEM part for GE range hoods. This cover shields the bulb from grease, smoke, and other kitchen residues that can accumulate during cooking, thereby extending the bulb's lifespan and maintaining optimal lighting.

Causes of a bad lens cover can include prolonged exposure to heat and cooking byproducts, which can lead to discoloration, warping, or cracking. 

Symptoms of a bad lens cover include:

• Reduced lighting or a dim kitchen workspace
• Visible cracks or warping on the cover
• Discoloration or cloudiness of the lens
• The lens cover not staying securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Knob is an OEM part for GE range hoods. This part allows you to adjust fan speed and lighting on your range hood, ensuring optimal ventilation and visibility over your cooktop. 

The main causes for the deterioration of a knob can be attributed to frequent use, exposure to kitchen elements like heat and grease, and accidental impacts that may lead to cracking or breaking.

Symptoms of a bad Knob include:

• The knob sticking or failing to turn
• Difficulty in adjusting the range hood settings accurately
• Visible wear or damage that compromises functionality

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Halogen Light Bulb is an OEM part for GE range hoods. It provides bright, focused illumination to enhance visibility while cooking, ensuring a well-lit stovetop area.

Causes of a bad halogen light bulb can include burnout from extended use, exposure to high temperatures, or damage from electrical surges. Additionally, oil and residue from frequent cooking can accumulate on the bulb, potentially leading to overheating and failure.

Symptoms of a bad halogen light bulb include:

• The light not turning on
• Flickering or intermittent lighting
• Dim or insufficient light output
• Blackened or visibly damaged bulb

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: The graphics on this part have been updated. The factory removed the round "GE" logo from the front of the cover.

This replacement switch box assembly is made by General Electric and is compatible with range hoods. The switch box assembly includes parts such as the fan switch, for turning on and off the fan, the light switch, and the motor, which drives the fan itself. All of these switches are necessary for proper equipment functionality. Over time, switches may become worn or jammed, or the switch box might become dented, bent, or otherwise broken, requiring replacement. Disconnect the range hood from the power source or turn off the circuit breaker before replacing this part.This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable metal and is only sold individually. This switch box assembly can be used with range hoods manufactured by General Electric, Hotpoint, RCA, and other brands.

This fan clip secures the ventilation fan blade or blower wheel to the motor shaft, preventing looseness and vibration. Replacing a worn or missing clip restores a tight fit so the fan runs smoothly and maintains proper airflow.

• Holds the fan blade/blower wheel firmly on the motor shaft
• Helps reduce wobble, scraping, or rattling noises during fan operation
• Can resolve a loose or non-spinning fan caused by a failed/missing retainer
• Supports proper airflow and cooling performance

• Disconnect power and allow the appliance to cool before servicing
• Access the fan/blower assembly and note the original clip's orientation
• Seat the clip fully in the shaft groove; ensure the wheel is secure and spins freely
• Wear cut-resistant gloves and use caution around sharp metal edges

The Control Knob is an OEM part for GE ranges. This part allows you to select and adjust the desired temperature or cooking function for the oven or cooktop burners.

Causes of a bad knob can include wear and tear over time, accidental impact or damage, or potential issues with the control stem or mechanism it connects to.

Symptoms of a faulty control knob include:

• Difficulty in turning or adjusting the knob
• Knob feeling loose or wobbly
• Markings or numbers worn off or illegible
• Knob not properly engaging with the control stem

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace a cracked or heat-damaged light socket base with this ceramic insulation base. It insulates and secures the lamp receptacle, helping the bulb seat correctly and maintain a reliable connection for consistent lighting.

• Provides a heat-resistant, insulated mounting point for the light socket
• Helps maintain a stable electrical connection to the bulb
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat securely, scorch marks or cracking at the socket base
• Restores reliable illumination when the original base is worn or damaged

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the area to cool completely before working near the lamp
• Handle ceramic components carefully; transfer any leads or hardware one at a time to maintain correct wiring
• Use the correct bulb type and wattage as specified by the appliance rating label