Parts for Ge JVX3300DJ3BB: Range Hood Parts

This lamp cover is the protective light lens for your appliance. It shields the bulb or lamp assembly from grease, moisture, and bumps while diffusing illumination for clearer, safer lighting.

• Covers and protects the light bulb or lamp assembly from grease, steam, and debris
• Diffuses light for more even, glare-reduced illumination
• Helps prevent accidental contact with a hot bulb
• Common failure signs: cracked, melted, yellowed, missing, or loose cover

• Disconnect power and allow the lamp to cool completely before starting
• Remove any mounting screw(s) or gently release locking tabs while supporting the cover
• Transfer and reuse existing fasteners or clips as applicable
• Seat the new cover fully and secure without overtightening;

This activated charcoal filter is used in recirculating microwave ventilation to absorb cooking odors and vapors as air is returned to the room, helping keep kitchen air fresher and maintaining effective vent performance. What it does:

• Adsorbs cooking odors when the microwave is set to recirculate (non-vented installation)
• Helps maintain airflow by replacing a saturated filter
• Common symptoms of a spent filter: lingering odors, reduced vent performance, darkened or deteriorating filter media

• 1 charcoal filter

• Disconnect power before servicing
• Remove the upper grille to access the filter; retain mounting screws
• Note and match the filter's orientation/airflow markings during installation
• Do not wash or reuse charcoal filters; replace when saturated

This grease filter sits in the ventilation path to catch grease and cooking residue before it reaches the fan and ductwork. Replacing a clogged or damaged filter helps restore airflow and keeps your vent system cleaner.

• Captures grease and airborne particles to protect the blower, motor, and cabinetry
• Supports proper airflow through the vent system for effective smoke and steam capture
• Replace when the mesh is torn, warped, missing, or heavily saturated
• Symptoms include lingering odors/smoke, reduced venting performance, or a filter that won't stay seated

• Disconnect power to the appliance before servicing
• Allow surfaces to cool; wear gloves—filter edges can be sharp
• Release the latch or fastener, slide out the old filter, and install the new one in the same orientation
• Do not operate the vent without a grease filter installed

The Range Hood Cover is an OEM replacement part for GE range hoods. It serves as a protective barrier for internal components, shielding them from grease, smoke, and debris while also contributing to the overall aesthetic of the range hood. This cover is essential for maintaining the efficiency and cleanliness of the appliance.

Over time, range hood covers can become damaged or discolored due to exposure to heat, grease, and cleaning agents. A compromised cover may fail to protect internal parts effectively, potentially reducing the performance of the range hood.

Symptoms of a bad range hood cover include:

• Visible cracks, warping, or discoloration
• Difficulty securing the cover to the range hood
• Increased grease or debris buildup on internal components
• A diminished appearance of the range hood

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This retaining nut is a small threaded fastener that secures appliance components in place, restoring stable mounting and preventing vibration or movement. It's a simple replacement for worn or missing nuts on compatible GE appliances. What it does:

• Secures elements, brackets or terminals to prevent loosening during use
• Stops rattling or movement caused by a missing or stripped nut
• Helps maintain proper alignment for heating and electrical connections
• Commonly used where a compact, threaded retaining nut is required

• One retaining nut

• Inspect mating threads and surrounding hardware; replace damaged studs or bolts as needed
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate tool
• Disconnect power to the appliance before working near electrical components

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. Replaces a worn or broken damper to restore proper air circulation and reduce temperature imbalances. What it does:

• Opens and closes to regulate airflow between refrigerator and freezer compartments
• Helps maintain set temperatures by directing cooled air where needed
• Faulty dampers can cause uneven cooling, warm spots, or overworking compressor
• Reduces noise from loose or broken damper flaps when operating

• One damper assembly

• Disconnect power before starting any repair to avoid shock
• Handle the damper flap and linkage carefully; plastic parts can be fragile
• May require removal of interior panels or shelves for access—keep track of fasteners

This replacement collar is a small support piece that centers and stabilizes a rotating shaft or drum assembly, helping reduce friction and noise for smoother operation. It restores proper alignment where a worn collar causes rubbing or wobble. What it does:

• Centers and supports the rotating shaft or drum to maintain correct alignment
• Reduces metal-on-metal contact that can cause noise, rubbing, or scraping
• Helps prevent excess wear on bearings, seals, and adjacent components
• Restores smoother rotation when a damaged collar allows wobble or vibration

• Disconnect power before servicing to avoid shock or injury
• Access may require removing panels or the drum/shaft assembly
• Install in the same orientation and seating as the original; inspect adjacent bearings, seals, and mounts

Replace a worn range hood control with this light and blower switch. It restores reliable on/off control of the hood's lamp and fan so you can cook with proper lighting and ventilation.

• Controls electrical power to the hood's light circuit
• Switches the blower on and off for ventilation control
• Common symptoms: light or fan won't turn on/off, intermittent operation, or a switch that sticks or feels loose
• Internal contacts can wear from heat, moisture, and repeated use

• Disconnect power at the breaker or unplug the hood before servicing
• Remove the control panel/cover to access the switch; note wire positions or take a photo
• Transfer wires one at a time to the new switch and ensure connectors are fully seated
• Reinstall the switch and panel, restore power, and test light and blower

This fan guard protects the appliance's condenser/cooling fan and keeps debris away from the blades to help maintain proper airflow and fan operation. It's a simple replacement that reduces the risk of fan damage. What it does:

• Shields the fan blades from large debris and accidental contact
• Helps maintain consistent airflow for efficient cooling
• Prevents fan blade chips or breaks caused by impacts
• Can reduce abnormal noise caused by rubbing or contact with obstructions

• Disconnect power to the appliance before starting any work.
• Remove access panels or grilles as needed to reach the fan—basic hand tools typically required.
• Handle edges carefully; part may have sharp edges.
• After installation, restore power and verify the fan spins freely and operates normally.

This cover plate is a factory-style trim panel that protects and finishes the appliance's control area and internal components, restoring a clean appearance and helping keep wiring and switches shielded from debris. What it does

• Covers and protects the appliance control area and underlying components
• Restores a finished look to a damaged or missing trim panel
• Helps prevent dust and spills from reaching electrical parts or switches
• Matches OEM fit and mounting points for a secure replacement

• One cover plate (trim panel)

• High-level replacement; typically removed and installed with basic hand tools
• Disconnect power to the appliance before starting to avoid shock or injury
• Inspect mounting clips and fasteners and replace if worn for a secure fit