Parts for Ge JVX5365SJ2SS: Range Hood Parts

The Grease Filter is an OEM replacement part for GE range hoods. It plays a crucial role in capturing and removing grease, smoke, and odors from the air during cooking. This filter helps maintain good indoor air quality and prevents the buildup of grease in the range hood and ventilation system.

Symptoms of a bad grease filter include:

• Reduced airflow or suction power
• Visible grease accumulation on the filter or range hood surfaces
• Lingering cooking odors in the kitchen
• Discoloration or deterioration of the filter material

Causes of a bad grease filter can be attributed to normal wear and tear over time, as well as exposure to high heat and grease buildup. Proper maintenance and regular cleaning or replacement of the filter are essential to ensure efficient operation and prevent potential fire hazards.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore bright, dependable lighting in your appliance with this LED light bulb. It replaces a failed or flickering lamp so you can clearly see the appliance interior or work surface when the door opens or the light switch is used.

• Provides illumination for the appliance cavity or work area, depending on model
• Replaces a burned-out, dim, or flickering bulb
• Helps when the light won't turn on with the door or switch
• Simple plug-in/screw-in replacement matching the original style

• Disconnect power to the appliance before replacing the bulb
• Allow the old bulb and surrounding area to cool before handling
• Remove any lens or cover as designed; install the new bulb fully seated without forcing
• Restore power and test the light; if it doesn't illuminate, recheck seating and the switch/socket

Replace a worn range hood control with this light and blower switch. It restores reliable on/off control of the hood's lamp and fan so you can cook with proper lighting and ventilation.

• Controls electrical power to the hood's light circuit
• Switches the blower on and off for ventilation control
• Common symptoms: light or fan won't turn on/off, intermittent operation, or a switch that sticks or feels loose
• Internal contacts can wear from heat, moisture, and repeated use

• Disconnect power at the breaker or unplug the hood before servicing
• Remove the control panel/cover to access the switch; note wire positions or take a photo
• Transfer wires one at a time to the new switch and ensure connectors are fully seated
• Reinstall the switch and panel, restore power, and test light and blower

This 7 MFD, 400V capacitor is a replacement electrical component that helps a motor or control circuit start and run more reliably. It restores proper motor performance and stable operation when the original capacitor fails. What it does:

• Stores and releases electrical charge to assist motor start-up and smooth running
• Commonly used in appliance motors and control circuits where a 7 MFD, 400V value is required
• Symptoms of a failing capacitor: motor hums, won't start, runs intermittently, or has reduced performance
• Replacing a faulty capacitor can resolve start and run-related issues caused by a degraded capacitor

• One 7 MFD, 400V capacitor

• Disconnect power to the appliance before servicing to avoid shock hazard
• Capacitors can retain a charge—discharge safely before handling or removal

The Lamp Socket is an OEM part for GE range hoods. This part holds the light bulb that illuminates the cooking area beneath the hood, providing necessary lighting for better visibility while cooking.

Common causes of a bad lamp socket include wear and tear over time, exposure to heat and cooking grease, or electrical issues that can cause the socket to malfunction.

Symptoms of a bad Lamp Socket include:

• The light not turning on or flickering
• The bulb burning out frequently
• The light being dim or inconsistent
• Visible damage or corrosion on the socket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bezel fits behind the control knob on select ranges and cooktops. It finishes the opening around the valve/shaft and helps protect the control panel from spills—restoring a clean look and proper knob alignment and feel.

• Provides a finished trim ring behind the control knob
• Helps shield the control area from spills and debris
• Centers the knob on the valve/shaft for smooth operation
• Common signs to replace: cracked or missing bezel, knob sits unevenly or wobbles, cosmetic damage

• Disconnect power to the appliance; for gas models, also shut off the gas supply. Allow the surface to cool
• Pull the knob straight off the stem
• Remove the old bezel, noting tab orientation
• Align and press/snap the new bezel into place; reinstall the knob and smooth rotation

This vented mode deflector directs exhaust airflow when the appliance is set to vented mode, restoring proper venting and helping reduce excess moisture and odors from the cabinet. Ideal replacement for damaged or worn deflectors. What it does:

• Redirects exhaust air into the vent path to support correct venting.
• Helps prevent exhaust from entering the appliance cavity or cabinet area.
• Can address symptoms such as poor venting, lingering odors, or reduced vent performance.
• Replaces cracked, warped, or otherwise damaged deflector pieces that affect airflow.

• Disconnect power to the appliance before beginning any service.
• Remove access panels or trim as required to reach the deflector; basic hand tools typically needed.
• Align the deflector to existing mounting points and fasten securely without over-tightening.

The Range Hood Damper is an OEM part for GE range hoods. It is located inside the range hood and is responsible for regulating the exhaust venting and circulation of air. The damper is designed to open and close automatically based on temperature and venting needs, allowing excess heat, smoke, and smells to escape from the cooking area. 

Causes of a bad damper can include wear and tear over time, failure of the damper motor or mechanism, or damage that prevents proper movement. 

Symptoms of a bad damper include: 

• Inadequate or poor ventilation when cooking 
• Excess heat or smoke building up under the range hood
• Strange noises coming from the damper area
• Manual movement of the damper is difficult or hindered

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This installation hardware kit provides the mounting pieces needed to secure your appliance during installation, helping ensure panels and trim stay properly aligned for safe, stable operation. Useful when hardware is missing, loose, or damaged. What it does:

• Supplies the factory hardware used to mount and secure appliance panels, trim, or assemblies
• Replaces missing or worn fasteners that can cause panels to shift or sit unevenly
• Restores proper fit and alignment for a finished, stable installation
• Helps eliminate rattles or movement caused by broken or loose mounting parts

• Turn off and disconnect power to the appliance before servicing
• Follow the appliance installation manual and use recommended fasteners and torque where specified
• Use common hand tools; keep small parts contained to avoid loss