Parts for Ge PVX7300FJ2DS: Range Hood Parts

This mesh grease filter captures airborne grease and large particles from cooking exhaust to help protect the venting system and reduce residue on surfaces. It restores grease-capturing performance for range hoods and over-the-range exhausts. What it does

• Traps grease and large particles from cooking vapors to prevent buildup inside the vent or hood.
• Helps reduce greasy deposits on cabinet surfaces, light covers, and exhaust paths.
• Can improve odor and smoke capture when the original filter is clogged or damaged.
• Fits into the filter slot and works with the appliance's existing blower and venting components.

• One mesh grease filter.

• Disconnect power to the appliance before accessing the filter for safety.
• Slide or latch the filter into the existing filter opening per the appliance's instructions; no tools typically required.
• Clean reusable mesh filters regularly; replace if bent, torn, or heavily clogged.
• Dispose of damaged filters and ensure the replacement seats securely to avoid interference with the fan.

Restore bright, dependable lighting in your appliance with this LED light bulb. It replaces a failed or flickering lamp so you can clearly see the appliance interior or work surface when the door opens or the light switch is used.

• Provides illumination for the appliance cavity or work area, depending on model
• Replaces a burned-out, dim, or flickering bulb
• Helps when the light won't turn on with the door or switch
• Simple plug-in/screw-in replacement matching the original style

• Disconnect power to the appliance before replacing the bulb
• Allow the old bulb and surrounding area to cool before handling
• Remove any lens or cover as designed; install the new bulb fully seated without forcing
• Restore power and test the light; if it doesn't illuminate, recheck seating and the switch/socket

The Charcoal Filter is an OEM part for GE range hoods. This filter plays a role in eliminating cooking odors, smoke and grease particles from the air stream before they are expelled outside. Constructed with an advanced charcoal formulation, it traps unwanted smells and microscopic debris through absorption.

Causes of a bad filter can include saturation over many absorption cycles. As contaminants accumulate in the charcoal granules, its odor-removing capability naturally declines

Symptoms of a bad charcoal odor filter include:

• Cooking odors and irritating smells lingering indoors
• Grease or residue visible on the filter housing
• Exhaust air still carrying odor particles despite ventilation
• Filter appears overly used and darker in color

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This electronic noise filter helps suppress electrical interference on the appliance's control circuitry, protecting the control board and helping restore stable operation and display performance. What it does

• Filters electrical noise and transient interference that can disrupt control circuits
• Helps stop intermittent resets, erratic displays, or unexpected control behavior caused by electrical interference
• Protects sensitive electronics from voltage spikes and transient disturbances
• Works as a replacement component for the appliance's original interference/surge filter

• One electronic noise filter

• Disconnect power to the appliance before attempting any service to avoid electric shock
• Handle the filter and connectors carefully; install in the same orientation and secure all wiring harness connections

The Lamp Socket is an OEM part for GE range hoods. This part holds the light bulb that illuminates the cooking area beneath the hood, providing necessary lighting for better visibility while cooking.

Common causes of a bad lamp socket include wear and tear over time, exposure to heat and cooking grease, or electrical issues that can cause the socket to malfunction.

Symptoms of a bad Lamp Socket include:

• The light not turning on or flickering
• The bulb burning out frequently
• The light being dim or inconsistent
• Visible damage or corrosion on the socket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bezel fits behind the control knob on select ranges and cooktops. It finishes the opening around the valve/shaft and helps protect the control panel from spills—restoring a clean look and proper knob alignment and feel.

• Provides a finished trim ring behind the control knob
• Helps shield the control area from spills and debris
• Centers the knob on the valve/shaft for smooth operation
• Common signs to replace: cracked or missing bezel, knob sits unevenly or wobbles, cosmetic damage

• Disconnect power to the appliance; for gas models, also shut off the gas supply. Allow the surface to cool
• Pull the knob straight off the stem
• Remove the old bezel, noting tab orientation
• Align and press/snap the new bezel into place; reinstall the knob and smooth rotation

The GE Range Hood Blower Motor Assembly is an OEM replacement part for GE ventilation hoods. It circulates exhausted air out of the kitchen in a safe, effective manner.  

Causes of a bad blower motor can include normal wear of internal bearings over extended use. Damage could occur if foreign debris enters the motor housing as well.

Symptoms of a bad blower motor assembly include:  

• Reduced or inconsistent airflow regardless of speed setting
• Abnormal noises like grinding or clanking during the operation  
• Inability to power on or change fan speeds from controls

This GE replacement motor is also compatible with hoods from Hotpoint, RCA and some Kenmore microwave range combinations.

This vented mode deflector directs exhaust airflow when the appliance is set to vented mode, restoring proper venting and helping reduce excess moisture and odors from the cabinet. Ideal replacement for damaged or worn deflectors. What it does:

• Redirects exhaust air into the vent path to support correct venting.
• Helps prevent exhaust from entering the appliance cavity or cabinet area.
• Can address symptoms such as poor venting, lingering odors, or reduced vent performance.
• Replaces cracked, warped, or otherwise damaged deflector pieces that affect airflow.

• Disconnect power to the appliance before beginning any service.
• Remove access panels or trim as required to reach the deflector; basic hand tools typically needed.
• Align the deflector to existing mounting points and fasten securely without over-tightening.

The Range Hood Damper is an OEM part for GE range hoods. It is located inside the range hood and is responsible for regulating the exhaust venting and circulation of air. The damper is designed to open and close automatically based on temperature and venting needs, allowing excess heat, smoke, and smells to escape from the cooking area. 

Causes of a bad damper can include wear and tear over time, failure of the damper motor or mechanism, or damage that prevents proper movement. 

Symptoms of a bad damper include: 

• Inadequate or poor ventilation when cooking 
• Excess heat or smoke building up under the range hood
• Strange noises coming from the damper area
• Manual movement of the damper is difficult or hindered

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This control board assembly replaces the oven/range electronic console board to restore keypad, display, timer and bake/clean functions. It stabilizes oven control response and returns normal electronic operation after a failed board. What it does:

• Manages user input, display, clock and timer functions on the appliance control console
• Routes signals for bake, broil, convection and self-clean cycles to the power relays
• Helps resolve symptoms like unresponsive keys, blank or erratic display, or loss of timed functions
• Works with associated relays and sensors; does not include wiring harness unless specified

• Disconnect power to the appliance before attempting service to avoid shock or damage.
• Handle the board by the edges and avoid touching components to prevent static damage.
• Verify connectors match and seat fully; do not force connectors onto pins.

This installation hardware kit provides the mounting pieces needed to secure your appliance during installation, helping ensure panels and trim stay properly aligned for safe, stable operation. Useful when hardware is missing, loose, or damaged. What it does:

• Supplies the factory hardware used to mount and secure appliance panels, trim, or assemblies
• Replaces missing or worn fasteners that can cause panels to shift or sit unevenly
• Restores proper fit and alignment for a finished, stable installation
• Helps eliminate rattles or movement caused by broken or loose mounting parts

• Turn off and disconnect power to the appliance before servicing
• Follow the appliance installation manual and use recommended fasteners and torque where specified
• Use common hand tools; keep small parts contained to avoid loss