Parts for Ge UVC7300SL1SS: Range Hood Parts

LED lamp that replaces a failed interior refrigerator light, restoring bright, easy-to-see illumination so you can find items and check contents. Direct-replacement design for a simple bulb swap. What it does:

• Provides interior lighting to replace a burned-out or flickering refrigerator lamp
• Restores visibility on shelves and in crisper compartments
• Uses LED lighting for consistent, long-lasting illumination compared with older bulbs
• Designed to match the original lamp's mounting and connector style for a straightforward replacement

• Always disconnect power to the appliance before replacing the lamp to avoid shock
• Remove the old lamp cover or housing per your appliance manual, then unplug or unclip the old lamp before installing the new unit
• Handle the lamp by its housing; avoid touching exposed LED surfaces or contacts

This rubber ring is a flexible sealing gasket that helps prevent leaks and cushions components where parts join. It restores a tight seal and reduces vibration when a worn or damaged ring causes seepage or noise. What it does:

• Forms a watertight seal at a mating surface to help stop leaks and drips
• Cushions and isolates parts to reduce vibration and rattling
• Helps retain and position connected components for proper alignment
• Commonly replaced if you see cracks, flattening, ripping, or active leaking

• One rubber ring

• Disconnect power and shut off water supply before servicing appliances
• Remove the old ring and clean mating surfaces; inspect for related damage
• Lubricate lightly with water or manufacturer-recommended lubricant to ease installation
• Test operation and check for leaks after reassembly; replace again if new leaks appear

This grease filter is the OEM-style metal mesh filter designed to capture airborne grease and cooking residues from vented range hoods and microwave exhausts, helping keep internal components cleaner and maintaining airflow performance. What it does

• Traps grease and large particles from cooking fumes before they reach the blower and ducts
• Helps reduce greasy buildup on internal parts, extending the life of fans and housings
• Can improve venting performance when clean and unobstructed
• Common symptoms of a failing or clogged filter: visible grease buildup, reduced exhaust performance, or stronger lingering cooking odors

• Turn off power to the appliance before accessing the filter area for safety
• Usually accessed from beneath the hood or microwave; remove by releasing the latch or sliding the filter out
• Inspect filter for damage; replace if bent, torn, or excessively clogged
• Refer to your appliance owner's manual for model-specific removal and cleaning instructions

This charcoal filter traps odors in the recirculating vent system, helping your appliance freshen the air when it isn't ducted outdoors. Replace a saturated filter to restore effective odor reduction and keep ventilation working as designed.

• Adsorbs cooking odors from vapors as air passes through the filter
• Intended for non-vented operation of the ventilation system
• Common replacement signs: lingering smells, dark/saturated media, or crumbling when handled
• Works with clean grease filters to help maintain effective odor control

• Disconnect power to the appliance before servicing
• Remove grille or filter cover per your owner's manual; note filter orientation/airflow arrows if present
• Install without bending; ensure it seats fully and the grille/cover is secured
• Charcoal filters are not washable—replace when saturated or as recommended by the manufacturer

This electronic power board is the main control PCB that provides regulated power and switching for the appliance's console and control functions, restoring reliable control when the original board has failed. What it does

• Supplies and distributes power to the control console and related circuitry.
• Switches and regulates oven/cooktop control signals so functions respond to user input.
• Faulty boards can cause a blank or unresponsive display, unlit console, or loss of heating/cooking control.
• Replacing the board resolves intermittent resets, display errors, and many control-related malfunctions.

• One electronic power board (control PCB) as pictured and specified by the manufacturer.

• Disconnect all power at the breaker or unplug the appliance before servicing.
• Handle the PCB by its edges and avoid static discharge; wear an ESD strap if available.
• Use basic hand tools to access the console; keep track of screws and connectors.

This is a self-tapping ST3.5 x 9.5 screw used to secure panels, trim and small appliance components. It replaces missing or damaged screws to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens control panels, brackets, trim pieces and light assemblies
• Replaces stripped, corroded or missing screws that allow parts to shift
• Restores secure mounting and helps eliminate vibration noise
• Small size for low-profile applications where a compact fastener is required

• Use the correct sized Phillips or Pozidriv driver to avoid cam-out
• Start screws straight and drive until snug; avoid overtightening to prevent stripping
• Disconnect power and remove any sharp panels before working to stay safe
• Keep a small parts tray to avoid losing tiny screws during repair