Parts for Ge ZV48SSJ2SS: Range Hood Parts

This grease filter helps trap airborne grease and large particles from cooking vapors to protect the range hood or microwave vent system and help keep ductwork and blower components cleaner. Fits replacement needs after wear or clogging. What it does

• Captures grease and large particulates from cooking exhaust to reduce buildup in the vent path.
• Helps maintain airflow efficiency by removing debris that can restrict the vent.
• Reduces odors and prevents grease from reaching blower and duct surfaces.
• Commonly replaced when filter is visibly clogged, torn, or no longer captures residue.

• One grease filter

• Turn off power to the appliance or unplug before accessing the vent or filter area.
• Remove the old filter per the appliance's user manual and slide or clip the new filter into place.
• No special tools typically required; handle filter edges carefully to avoid damage.
• Clean surrounding areas and follow the appliance manufacturer's instructions for regular maintenance and safe operation.

This replacement light bulb restores illumination in your microwave, making it easier to see food and controls during use. Installing a new bulb brings back dependable lighting for the cavity or cooktop area, depending on your model. What it does:

• Supplies light when the appliance calls for it
• Improves visibility to monitor cooking progress and the work area
• Typical symptoms: no light, dim or flickering light, intermittent operation, blackened or broken bulb
• Normal wear item that eventually burns out and needs replacement

• Includes 1 light bulb

• Disconnect power at the outlet or breaker before servicing
• Allow the old bulb and surrounding area to cool before handling
• Remove the lens or access cover per your model's manual; install the new bulb fully seated without forcing
• Handle by the base and keep oils off the glass; use only the bulb type and wattage specified for your model

This infrared lamp supplies radiant heat for the appliance's infrared heating feature, such as a warming lamp. Replacing a failed lamp restores intended heat output so the feature works as designed. What it does

• Provides infrared radiant heat for the unit's IR heating/warming function
• Common symptoms of failure: IR feature won't heat, lamp does not glow, or warming is weak/uneven
• Visual clues can include darkened glass, a broken filament, or cracked bulb envelope

• One infrared lamp

• Disconnect power at the breaker and allow all components to cool completely
• Access the lamp location per your model; remove any covers or shields as required
• Handle the glass with clean gloves or a tissue—oils from skin can shorten lamp life
• Install snugly without over-tightening; confirm proper seating and operation before reassembly

A blower assembly that circulates oven or range heat to support convection cooking. Replacing a worn or failed blower restores airflow for more even cooking and reduces noisy or grinding fan operation. Sold individually. What it does:

• Circulates hot air across the oven cavity to support convection and temperature consistency.
• Restores airflow that helps prevent uneven cooking or extended bake times when the blower fails.
• Common symptoms of failure: loud or grinding noise, little or no airflow from the convection fan, or reduced baking performance.
• Replaces assemblies that are worn, seized, or producing excessive vibration.

• Disconnect electrical power (and gas supply, if applicable) before starting any service.
• Allow the appliance to fully cool; remove access panels to reach the blower.
• Handle fan blades carefully to avoid damage; verify the blower spins freely and wiring connectors are secure before reassembly.

This control knob replaces a worn, broken or missing range/oven front-panel knob so you can safely and easily set burners or oven functions. It restores a secure, tactile interface for accurate control. What it does:

• Replaces a damaged or missing front control knob so the selector turns smoothly
• Helps stop slipping or loose knobs that make it hard to set heat levels
• Restores clear detents and tactile feedback for burner or oven settings
• Useful for cosmetic repair when the original knob is cracked or faded

• Disconnect power to the appliance before starting any service
• Pull the old knob straight off the control shaft; inspect the shaft for damage
• Align and push the new knob onto the shaft until it seats securely

This ring nut is a small threaded securing nut used to fasten and stabilize appliance fittings and components. It helps keep connections tight and parts properly seated for reliable operation. What it does:

• Secures threaded fittings or assemblies to prevent loosening during use
• Holds components in place on burners, valves, or other hardware where a retaining nut is required
• Worn or stripped ring nuts can cause loose components, rattling, or leaks at connections
• Replacing a damaged ring nut restores proper mechanical retention and alignment

• One ring nut

• Disconnect power and shut off water/gas before starting any repair
• Use the correct-size wrench or socket; start threads by hand to avoid cross-threading
• Tighten snugly but avoid over-torquing, which can strip threads or damage fittings
• Inspect mating threads and any seals or gaskets; replace if damaged

This installation hardware kit provides the mounting screws and brackets needed to secure the appliance during installation, helping hold it steady and aligned in the cutout or cabinet opening. What it does:

• Provides the screws, brackets and hardware used to fasten the appliance to the countertop or cabinet
• Helps prevent shifting, rocking or uneven gaps after installation
• Replaces missing, damaged or corroded installation fasteners
• Useful when reinstalling after service or when refitting the unit

• Use the kit only for the intended model and follow the appliance installation instructions
• Turn power/gas off and disconnect any utilities before beginning work
• Tighten fasteners securely but avoid over-torquing which can strip threads or damage trim