Parts for Thermador PH30HS/01: Range Hood Parts

This transition with damper directs and controls airflow between compartments to help maintain even temperatures. It replaces a worn or broken airflow transition assembly so the fridge can circulate cold air correctly. What it does:

• Guides conditioned air between refrigerator compartments and prevents unwanted air leaks
• Damper blade modulates airflow to help stabilize internal temperatures
• Common replacement for symptoms like uneven cooling, warm spots, or temperature fluctuations
• Also used when the damper is cracked, stuck, or noisy and won't open/close smoothly

• Basic mechanical replacement; disconnect power before servicing to avoid electrical hazards
• Remove interior panels as required for access; handle plastic components gently to avoid cracking
• Check damper linkage and mounting tabs for proper alignment during reinstall

This oven baking pan provides a flat, durable surface for baking and roasting. It replaces a damaged or missing oven pan so you can bake evenly and catch drips for easier cleanup. What it does:

• Provides a stable, flat surface for cookies, sheet cakes, vegetables and other oven-baked foods
• Catches spills and drips to help protect the oven bottom from messes
• Restores even heat contact when a warped or damaged pan causes uneven browning
• Works with standard oven racks for easy insertion and removal

• Slide pan into an oven rack slot sized for your appliance; do not force
• Allow the oven and pan to cool before handling; use oven mitts when hot
• Hand wash or follow the manufacturer's cleaning instructions to preserve finish
• Inspect oven clearances and door closure to ensure safe fit before first use

This spacer positions and secures the dishwasher filter assembly to ensure a proper seal and consistent water flow for effective cleaning. Replaces a worn or damaged spacer to help prevent leaks and reduce debris bypass around the filter. What it does:

• Centers and supports the filter assembly inside the sump
• Helps maintain a water-tight seal between filter components
• Prevents gaps that can allow food particles to bypass the filter
• Can cause noise, leaks, or poor wash performance if cracked or missing

• One spacer designed for the filter assembly

• Disconnect power and turn off water supply before servicing
• Remove lower rack and access the filter housing per your manual
• Replace the spacer in the filter stack, making sure it seats evenly
• Reassemble parts, restore power/water, and run a short cycle to check for leaks

This repair kit filter replaces a worn or damaged dishwasher filter to help restore normal drainage and prevent debris from recirculating. Use it to maintain wash performance and reduce odors caused by trapped food particles. What it does:

• Traps food and debris to protect the pump and spray arms
• Helps prevent clogs and poor drainage that can cause standing water
• Reduces buildup that leads to unpleasant smells or reduced cleaning results
• Restores proper filtration when the original filter is cracked, torn, or missing

• Turn off and unplug the appliance or disconnect power at the breaker before servicing
• Remove the old filter assembly per the manufacturer instructions; inspect seating area for debris
• Handle small parts carefully and ensure proper alignment to avoid leaks or poor sealing

The Lamp is an OEM component specifically designed for Bosch range hoods. Installed above the cooktop, the lamp provides directed illumination of the cooktop surface. 

Symptoms of a bad lamp include:

• Dim or no light emitted from the hood  
• Flickering or intermittent lighting that makes the cooktop difficult to see
• Inability to clearly observe cooking processes on the stovetop

Causes of a bad lamp are usually reaching the end of the rated bulb lifespan, or damage from heat or humidity over time directly above the cooking surface. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This VDR resistor is a replacement suppression resistor used on compatible Bosch appliances to protect electronic controls from voltage spikes and transient surges. It helps restore reliable control board operation when the original resistor has failed. What it does:

• Suppresses voltage transients to help protect the control board from spikes
• Prevents intermittent control or erratic electronic behavior caused by a failed suppressor
• Restores the intended surge-protection function when installed in place of a damaged component

• Always disconnect power to the appliance before servicing to avoid shock or damage
• Handle the part carefully and observe electrostatic-discharge (ESD) precautions for electronic components
• Replace only with the same part number or OEM-approved equivalent to maintain proper protection

The Control Module is an OEM part specifically designed for Bosch range vent hoods. It is responsible for managing and regulating its various functions and settings. It allows you to adjust fan speeds, activate different lighting options, and control other features of your vent hood.

A bad control module can occur due to electrical malfunctions, power surges, or component failure. Signs of a faulty control module include unresponsive or erratic behavior from the vent hood, failure to operate certain functions, or complete loss of control over the unit.

Symptoms of a bad control module include:

• Unresponsive or non-functioning fan 
• Inability to adjust or control the settings 
• Erratic or irregular function

Replace your malfunctioning or damaged control module with this genuine OEM Bosch part to restore your range hood. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This strain relief keeps the appliance's power or internal wiring secure where the harness passes through the cabinet, reducing stress on wires and helping prevent frays or loose connections. It's a small replacement part that restores proper cable routing and strain protection. What it does:

• Secures and protects wiring where the harness passes through a chassis or housing
• Prevents wire abrasion and reduces stress at the entry point
• Helps stop intermittent electrical connections caused by loose or pinched wiring
• Restores correct cable routing for safer, longer-lasting wiring

• Disconnect power before servicing; follow all safety instructions for your appliance
• Remove access panels as needed to reach the harness entry point
• Seat the strain relief fully in the opening and route the wiring through the boot without pinching

The Halogen Lamp is an OEM replacement part specifically designed for Bosch range vent hoods. It provides full-spectrum lighting above the cooktop. Causes of a damaged halogen lamp may be normal wear and tear over extended use. 

Symptoms of a bad halogen lamp include: 

• Dim, flickering or no light 
• Inadequately light for the cooking surface

This genuine OEM Bosch lamp restores optimum visibility above the range for safe cooking. This Bosch part can also be used on Thermador and Gaggenau appliances.