Parts for Electrolux E51NK60ESS: 03 - Recommended Spare Parts

This gauge displays temperature readings for monitoring appliance operating conditions. It provides visual feedback on internal temperatures to help ensure proper operation and food safety. Replace it if the gauge shows incorrect readings, the needle is stuck, or the display is cracked or unreadable.

If your grill burner won't light or has delayed ignition, this electrode creates the spark needed to ignite gas. Simple DIY fix restores reliable lighting.

Replace a worn grill burner causing uneven heating or weak flames. This burner restores proper heat distribution for consistent grilling results.

Grill won't ignite or clicking but no flame? This ignition electrode creates the spark to light your burners. Common fix for ignition failures.

This cast-iron cooktop grate replaces a damaged or worn gas range grate to restore a stable, level surface for cookware and even heat distribution while you cook. What it does:

• Supports pots and pans above the burner for stable cooking
• Protects burner heads from spills and direct impact
• Restores an even cooking surface if original grate is cracked, warped, or chipped
• Helps maintain proper flame contact with cookware for consistent heating

• Remove power/gas supply or follow appliance shutdown instructions before servicing
• Lift old grate straight up; align new grate over burners and set into position
• Use gloves to avoid sharp edges and protect finish while handling
• Clean grate with non-abrasive cleaners; avoid harsh chemicals that damage finish

If your grill burner won't light or sparks weakly, this electrode spark igniter creates the spark needed for reliable gas ignition. Simple DIY fix.

If your grill won't heat evenly or has weak flames, the burner may need replacement. This part restores proper heat distribution for consistent cooking.

Control knob for grill burner adjustment. Installs on the control panel. Replace if your knob is cracked, broken, loose, or missing for proper operation.

Replacement wire for your grill. Installs in the control or ignition system. Order a new one if your existing wire is frayed, damaged, or broken.

The grill igniter wire is the electrical cable that connects the igniter to the power supply on your gas grill. It carries the spark current needed to ignite the burners when you press the ignition button. Replace this wire if your grill won't spark, the igniter clicks but produces no flame, or the wire is visibly cracked or burned.

Fix low flame, uneven heating, or burners that won't stay lit with a new gas pressure regulator. Controls gas flow from tank to burners. Basic repair.

This channel is a molded mounting guide that secures and aligns trim, panels, or drawer/door components for proper fit and operation. Replaces worn or broken channels to restore stable component positioning and reduce rattling. What it does:

• Supports and guides a door, drawer or trim piece so it opens, closes and sits correctly
• Holds panel edges or shelves in place to prevent shifting or gaps
• Stops unwanted movement and reduces vibration or rattling noises
• Useful when the original channel is cracked, split, warped, or missing

• Disconnect power to the appliance (unplug or switch off breaker) before starting any work
• Remove surrounding trim or panels carefully to avoid damaging clips or paint
• Retain and reuse any original screws, clips or fasteners unless damaged; replace fasteners if missing
• Handle with care and wear gloves and eye protection

Control knob for grill burner adjustment. Mounts on the control panel. Replace if cracked, broken, worn, or missing for proper temperature control.

Burners won't light or spark is weak? This ignitor module restores reliable spark generation to ignite gas burners. Straightforward repair.

Rotisserie fork for grills. Secures food to the rotisserie spit for even cooking. Replace if bent, broken, or missing to restore rotisserie function.

Grill motor not turning? This rotisserie motor replacement restores smooth rotation for even cooking. Moderate DIY repair, typically 30-45 minutes.

Right-side end cap for grill handles. Replaces cracked, broken, or missing caps to restore a finished look and secure grip on your handle assembly.

This replacement handle end is the small end cap that finishes and secures a refrigerator or freezer door handle for a clean, finished look. It restores a snug fit and hides the handle fastener. What it does:

• Covers and protects the exposed handle fastener or mounting area
• Helps keep the handle snug and prevents wobbling or rotation
• Restores finished appearance to a cracked, chipped, or missing end piece
• Useful when the original end cap is broken, lost, or cosmetically worn

• One handle end (end cap) as pictured

• Usually secures by snapping or sliding onto the handle; may require removing handle or a single screw
• Use basic hand tools; keep screws and brackets for reassembly
• No electrical disconnection required for door-handle end cap replacement

Replacement mounting screw for grills. Secures panels, trim, brackets, and assemblies. Needed when original screw is missing, stripped, or damaged.

Replacement mounting bolt for grill assembly. Secures components and panels in place. Order a new bolt if yours is stripped, rusted, or missing.

Replacement mounting screw for grill assembly. Secures panels, brackets, or internal components. Order if original screw is stripped, lost, or damaged.

Replacement mounting screw for grill assembly. Secures components and panels in place. Order a new screw if original is stripped, missing, or damaged.

Wire component for grill assembly. Installs internally to connect electrical components. Replace if frayed, damaged, corroded, or disconnected.

Mounting nut for grill assembly. Secures components and hardware throughout your grill. Replace if stripped, corroded, or missing for proper fit.

Fix intermittent power or component failures with this insulated wire lead. Restores electrical continuity when original wiring is damaged or corroded.