Parts for Frigidaire CAHE12ERR410A10: 03 - Recommended Spare Parts

This factory air filter helps keep your appliance's ventilation system clean and unrestricted. Replacing a dirty or damaged filter supports proper airflow, protects internal components, and helps reduce unwanted odors during normal operation.

• Screens airborne debris along the intake/exhaust path to protect internal parts
• Helps maintain consistent airflow for effective ventilation
• Replace when clogged, torn, warped, or missing
• Common signs include weak ventilation, lingering odors, or a visibly dirty/damaged filter

• Disconnect power before servicing
• Access the filter location per your model (grille, vent panel, or access cover)
• Note orientation and fully seat the new filter; secure any tabs or screws as designed
• Do not operate the appliance without the filter installed

This replacement door frame restores the outer support and trim around an appliance door, helping the door seal properly and maintain correct alignment for safe, efficient operation. Fits original equipment design. What it does

• Provides structural support for the appliance door and secures outer trim pieces.
• Helps maintain proper door alignment so the door closes evenly and seals.
• Replaces cracked, bent or damaged frames that cause gaps, rattling or misalignment.
• Restores the appearance of the appliance exterior when the original frame is dented or worn.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle any attached glass, trim or clips carefully to avoid breakage or cuts.
• Basic hand tools are typically required; installation may require removing the door or outer panels.

This replacement evaporator fan blade circulates cold air across the freezer and refrigerator compartments to help maintain even temperatures and efficient cooling. Designed to match the OEM shape for proper airflow and fit. What it does:

• Spins on the evaporator fan motor to move cold air through the evaporator and into the cabinet
• Helps stabilize internal temperatures and reduce frost buildup when operating correctly
• Commonly replaced when cracked, chipped, warped, or causing unusual noise or poor airflow
• Restores proper airflow to improve cooling performance when the original blade is damaged

• One fan blade

• Disconnect power before servicing the appliance to avoid electrical shock or injury
• Inspect the motor shaft and mounting for damage; clean debris before installing the new blade
• Ensure the blade is seated fully and rotates freely without rubbing against the housing
• If the motor shows excessive wear or noise, replace the motor assembly as needed rather than just the blade

The Heater is an OEM part for Frigidaire air conditioners. Designed to provide supplemental heating, this heater extends the usability of your air conditioning unit into the colder months, enabling both cooling and heating from a single appliance. 

Causes of a bad heater can include electrical faults like short circuits or failing elements, accumulation of dust or debris that impedes functionality, and general wear and tear that deteriorates its components over time.

Symptoms of a bad heater include:

• Reduced heating efficiency, failing to adequately warm the space
• Circuit breaker trips when the heater is turned on
• Unusual or loud noises during operation
• Smell of burning when the heater is active

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This capacitor supplies the temporary electrical boost motor compressors need to start and run smoothly. Replacing a failed capacitor can restore reliable startup and help the refrigerator maintain proper cooling performance. What it does:

• Provides a momentary voltage boost to the compressor motor during startup
• Helps the compressor run more efficiently and prevents hard-starting
• Commonly linked to symptoms like a humming compressor, repeated clicking, or no-start condition
• Prevents excessive stress on start relays and other starting components when functioning properly

• Disconnect power to the appliance before starting any work
• Capacitors can hold charge—discharge safely with insulated tools
• Handle terminals carefully and match polarity/terminals to the original part

This electronic control board is the oven/range main control that manages bake/heat functions and user interface signals so the appliance can run selected cycles. Replaces a failed or malfunctioning main control assembly to restore command and timing functions. What it does:

• Regulates oven temperature control signals and cycle timing
• Communicates with the user interface and touchpad/display
• Stops erratic cycling or control lockups caused by a failed board
• Resolves symptoms like unresponsive controls, incorrect cycles, or no heating when diagnostics point to the main board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by the edges and avoid static discharge; wear an ESD strap if available
• Verify connectors and harness routing before removal; label wiring to ensure correct reconnection

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This run capacitor helps the refrigerator's motor start and run more reliably, reducing strain on the compressor and fan. Replacing a failing capacitor can restore normal motor operation and help the appliance cool properly. What it does:

• Provides the electrical phase shift needed for motor start and continuous operation
• Helps reduce motor overheating and hard-start symptoms
• Commonly replaced when motors hum, won't start, or cycle erratically
• Supports steady compressor and fan performance for consistent cooling

• One run capacitor (single unit as pictured)

• Disconnect power to the appliance before inspecting or replacing the capacitor
• Discharge the capacitor safely before handling to avoid shock
• Verify terminal markings and wiring; replace with same type and ratings