Parts for Jenn-Air JFC2089HTB: 12 - Ref Dr Storage & Center Hinges Parts

The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.

A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.

Symptoms of a bad refrigerator water filter include:

• A decrease in water flow or water pressure.
• An unpleasant taste or odor in the water.
• The presence of particles or sediment in the water.
• Cloudy or discolored ice cubes.

If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Replace a cracked or missing dairy tray on your refrigerator door. This door bin restores a dedicated spot for butter and small items so they stay organized and easy to reach while maintaining a secure fit on the door.

• Mounts on the refrigerator door as the dairy compartment tray
• Holds butter, cheese, and other small items securely
• Restores proper fit when the original tray is cracked, warped, or missing
• Common symptoms: broken tabs, tray falls off, loose/wobbly fit, items spilling when the door opens

• Open the door, lift the old tray straight up and out; align the new tray with the door slots and lower until fully seated
• Handle plastic parts gently and avoid forcing; allow parts to warm to room temperature to reduce risk of cracking
• Confirm both sides are fully engaged before loading items

Color: clear. Measures about 11 inches wide by 7 inches high.

This medium refrigerator door bin replaces a cracked or missing shelf on the fresh-food door. It restores secure, easy-to-clean storage for bottles and condiments so items stay organized and within easy reach.

• Attaches to the fresh-food door to hold jars, condiments, and bottles
• Replaces bins that are cracked, warped, or won't stay seated
• Helps prevent items from falling when the door is opened and closed
• Typical symptoms: broken tabs, wobbling, or a missing bin

• Disconnect power before servicing; wear gloves to protect hands
• Allow the new bin to reach room temperature before snapping into a cold door liner
• Align with the door's rails/tabs and press down until it locks securely
• Distribute weight evenly and avoid overloading to prevent future damage

This refrigerator door bin is the large "gallon" shelf that snaps into the fresh food door. It restores secure storage for milk jugs and tall bottles when the original bin is cracked, loose, or missing.

• Holds gallon-size containers and other tall items on the refrigerator door
• Snaps into the molded door liner to add usable storage space
• Helps organize contents and reduce tipping or spills
• Common symptoms: cracked plastic, broken mounting tabs, bin won't stay in place, or missing bin

• Typically installs by aligning with the door slots and pressing down until it locks; no wiring or tools required in most cases
• Confirm orientation and position before seating; do not force the bin
• Avoid overloading after installation; distribute weight evenly
• Remove items from the door before replacement to prevent spills or injury

This center hinge pin is the pivot stud for the refrigerator door's middle hinge. Replacing a worn pin restores stable door movement and alignment so the door opens smoothly and seals reliably.

• Provides the pivot point for the door on the center hinge bracket
• Helps maintain proper door alignment for smooth opening/closing
• Wear or damage may show as door sagging, rubbing, or wobbling at the hinge
• Misalignment from a worn pin can contribute to poor sealing or a door that won't stay closed

• Disconnect power; wear cut-resistant gloves
• Remove items from the door and support the door before loosening hinge fasteners
• Lift the door off the hinge, swap in the new pin, and transfer any spacers/shims in the same order
• Reassemble, align the door, and confirm the gasket makes full contact all around

This replacement screw secures appliance panels and components to restore proper fit and reduce vibration. A straightforward fastener that helps keep parts aligned and prevents noise or loose trim from worsening. What it does:

• Fastens panels, brackets, or trim pieces to the appliance frame
• Helps stop rattling or vibration caused by loose or missing hardware
• Restores proper alignment where original screw has been lost or damaged
• Works wherever the OEM screw specification is required for secure mounting

• Turn power off and unplug the appliance before working on it
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed fasteners organized so you reinstall the correct pieces