Parts for Maytag MSD2242VES03: 06 - Refrigerator Door Parts

The Whirlpool Everydrop Water Filter 3 is a genuine OEM replacement part designed to improve the quality and taste of water while filtering out impurities. This filter is specifically designed for side-by-side refrigerators that accept Filter 3. Contains the ability to reduce 66 contaminants including lead, mercury, asbestos, and industrial chemicals. It helps to provide clean, fresh-tasting water. The filter needs to be changed every 6 months or 200 gallons for optimal performance. The fast and easy filter change requires no special tools. Simply push until you hear the receiver click into place. This NSF-certified filter is a reliable and affordable way to ensure that your family is drinking clean, refreshing water. SOLD INDIVIDUALLY

Specs:

• Filter Media: Carbon Block
• Operating Pressure: 30-120 psi
• Operating Temperature: 33-100 °F
• Flow rate: 0.5 gpm
• Material: Plastic
• Color: White
• Approximate Dimensions: 12 inches long, 2 inches in diameter

The Door Thimble, Top is an OEM part for Whirlpool refrigerators. This component is used to support and secure the door hinge, ensuring smooth and stable opening and closing of the refrigerator door.

You should replace the door thimble if it becomes damaged or worn out. Causes of a bad door thimble include wear and tear from frequent use, stress from heavy door loads, or damage from accidental impacts. A faulty thimble can lead to misalignment of the door, causing it to sag or not seal properly.

Symptoms of a bad Door Thimble, Top include:

• Difficulty in opening or closing the door
• The door not aligning correctly with the refrigerator frame
• Noticeable sagging or wobbling of the door
• Unusual noises when the door is moved

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Compartment Door is an OEM component for Whirlpool and Kenmore built-in refrigerator models. It provides access to organized storage in the fridge's fresh food compartment. The compartment door measures approximately 15” long by 6” wide.

As a high-use access point, the door endures constant opening/closing stresses. Over extended periods, normal wear gradually reduces the quality and integrity of its cushioned sealed closure.

Symptoms include:

• Difficulty fully closing/latching the compartment door 
• Loud squeaking or sticking during operation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Shelf Bar is an OEM part for Whirlpool refrigerators. It is designed to secure items on the door shelves, providing a barrier that prevents stored items from falling out when the door is opened or closed. This bar ensures that jars, bottles, and other items remain in place, maximizing storage efficiency. It measures about 17 inches wide by 2-1/2 inches high by 5 inches deep.

Causes of a bad door shelf bar can include wear and tear from regular use, damage due to overloading the shelf, or accidental impact that leads to cracks or breaks. Ensuring the door shelf bar is in good condition helps maintain the organization and functionality of the refrigerator door storage.

Symptoms of a bad door shelf bar include:

• Cracks or visible damage to the bar
• The bar not staying securely in place
• Items falling from the door shelves
• Difficulty in fitting the bar properly onto the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Shelf Bin is an OEM part for Whirlpool refrigerators. This bin attaches to the inside of the refrigerator door, offering convenient storage for condiments, bottles, and other small or frequently accessed items. By maximizing the usable space within the refrigerator, this door shelf bin helps keep your refrigerator organized and items within easy reach.  

Common causes for these issues can stem from overloading the bin beyond its weight capacity, accidental damage from items being placed too forcefully, or the natural aging of plastic materials leading to brittleness and cracks.

Symptoms of a failing Door Shelf Bin include:

• Cracks or breaks in the plastic
• The bin becoming loose or failing to attach properly to the door
• Visible warping or deformation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Refrigerator Door Gasket is an OEM replacement part for Whirlpool refrigerators. This black gasket ccreates a seal around the door perimeter, helping maintain proper cooling and humidity levels inside the fridge.

Causes of a bad door gasket can include cracks, compression set, or decomposition of the sealing material over repeated use and exposure. Age and general wear also contribute to deterioration. 

Symptoms of a bad door gasket include: 

• Cool air leaking noticeably around the door seal 
• The door not closing flush or tightly against the cabinet
• Fogging or frost developing inside near the door  
• Warm spots felt along the gasket perimeter

This OEM Whirlpool part is compatible with other brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and some Kenmore refrigerators.

This replacement screw secures panels, brackets, and internal components in Whirlpool-built appliances. Use it to replace missing or stripped hardware to restore a snug fit, reduce rattling, and maintain proper alignment. What it does:

• Fastens components to the appliance cabinet or frame
• Helps maintain alignment and proper clearances
• Reduces vibration-related noises from loose or missing hardware
• Common replacement when a screw is lost, corroded, or threads are damaged

• 1 screw

• Disconnect power before service; for gas appliances, also shut off gas supply
• Start threading by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly without overtightening to prevent stripping
• Inspect and replace any worn clip/nut or damaged threads

This replacement screw fastens appliance panels, brackets, and internal components so everything stays aligned and rattle-free. Use it to replace stripped, corroded, or missing hardware and restore a solid, secure fit during repairs.

• Secures panels, brackets, covers, and assemblies in place
• Replaces damaged or missing hardware to maintain a firm hold
• Helps reduce vibration and rattling from loose fasteners
• Supports proper fit and alignment after service

• Disconnect power and shut off water/gas (as applicable) before servicing
• Match to the original fastener and replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Repair threads or use the manufacturer-specified hardware for that location

The Door Upper Closure Cam is an OEM part for Whirlpool refrigerators. It is designed to provide proper closure and alignment for the refrigerator door. The upper closure cam is located on the top hinge of the refrigerator door and works in conjunction with the lower closure cam to ensure a tight seal and prevent air leaks.

Causes of a bad upper closure cam can include regular use, accidental damage, or excessive force applied to the door.

Symptoms of a bad upper closure cam include:

• Difficulty in closing or opening the refrigerator door.
• The door not staying securely closed.
• Uneven gaps or misalignment between the door and the refrigerator cabinet.
• Excessive noise or squeaking when operating the door.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely. 

Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.

Symptoms of a bad screw include: 

• Loosened or detached components that were once fastened 
• Reduced structural integrity of connections or assemblies
• Potential safety hazards if critical parts become dislodged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This hi-lo hex screw secures panels and components on compatible Whirlpool appliances, providing a correct fit and reliable fastening where factory hardware is required. Use to replace missing, damaged, or stripped fasteners for a secure repair. What it does:

• Fastens panels, control boards, or trim where a hi-lo hex-head screw is specified
• Restores proper mounting when original screw is missing, bent, or stripped
• Helps stop rattling or movement caused by loose or damaged fasteners
• Matches factory fit to maintain correct alignment and clearances

• One hi-lo hex-head screw (quantity: 1)

• Turn off and unplug the appliance before starting any repair
• Use the correct hex driver to avoid rounding the head; install until snug—do not overtighten
• Confirm screw length and thread engagement match the original to prevent damage to components

Handle keyhole clip that secures the handle shaft in the keyhole area to keep the handle properly attached and aligned. Replaces a broken or worn clip to reduce handle wobble and restore a solid grip. What it does:

• Holds the handle shaft or retainer in the keyhole area to keep the handle secured.
• Replaces a damaged clip that can allow the handle to move, rattle, or come loose.
• Prevents extra wear or rubbing caused by a loose handle.
• Small, hidden part—failure symptoms are usually limited to handle looseness or detachment.

• High-level installation: access the handle mounting area and snap the clip into the keyhole slot to retain the handle shaft.
• Use basic hand tools as needed and follow the appliance service manual for disassembly steps.
• Disconnect power or follow appropriate safety procedures for appliances where required.

This end cap is the small replacement trim piece that covers the end of a door or drawer handle, restoring a finished appearance and helping keep the handle secure. It's a simple cosmetic and retention repair for worn or damaged handle ends. What it does:

• Covers and protects the exposed end of a handle for a finished look
• Helps keep the handle anchored and prevents side play or wobble
• Replaces cracked, chipped or missing end caps that cause cosmetic damage
• Restores proper alignment and feel when opening and closing the door or drawer

• Basic hand tools typically required; remove handle or access clip/screw per your appliance's service instructions
• Align cap with handle end and snap or press into place until fully seated
• If screws or retaining clips are used, tighten to secure but avoid over-torquing
• Always unplug the appliance or disconnect power before servicing if access requires working near electrical components