Parts for Ge GMR06AAZABB: 01 - Refrigerator Parts

This upper hinge cover is a molded trim piece that snaps over the refrigerator's top door hinge to protect the hinge, hide hardware and restore a finished appearance. It replaces cracked, broken or missing hinge trim for a cleaner door look. What it does:

• Covers and protects the top door hinge from dirt and damage
• Conceals hinge screws and hardware for a finished appearance
• Helps prevent snagging or sharp edges from a damaged hinge area
• Commonly replaced when the cover is cracked, split or missing

• One upper hinge cover

• Disconnect power to the appliance before starting any repairs when required by the appliance manufacturer
• Support or secure the door before removing hinge fasteners to prevent tipping or injury
• Remove hinge screws, replace the cover, then reassemble and verify door alignment
• Use basic hand tools; keep existing hinge hardware unless explicitly specified otherwise

This replacement door handle restores a secure, comfortable grip on your refrigerator door. Replace a cracked, loose, or missing handle to keep the door easy to open and the appliance looking clean and finished.

• Provides the gripping surface needed to open and close the refrigerator door
• Replaces broken, cracked, or worn handles
• Helps correct a loose or wobbly handle
• Restores appearance when the original is scuffed or missing

• Disconnect power before beginning any repair
• Use the correct driver/Allen key per your model to remove existing handle hardware
• Align the new handle on the door's mounting studs or brackets and secure with existing fasteners
• Tighten hardware evenly and verify smooth door operation

A replacement screw used to secure appliance panels, trims, or components so parts stay aligned and stable. Installs quickly with a matching driver to restore proper fit and reduce vibration or rattling caused by loose fasteners. What it does:

• Fastens panels, trim pieces, brackets or small components in place
• Restores proper alignment and prevents rattling or vibration
• Replaces missing, stripped, or damaged screws that cause loose parts
• Works where the OEM screw size and thread match the original mounting point

• Screw

• Verify this screw matches the original in length, head style and thread before installing
• Disconnect power and remove any obstructing parts before working on the appliance
• Use the correct driver and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to avoid damaging parts

This axis cover is the replacement shaft cap that protects and supports the dryer/drum axis assembly, helping keep the shaft sealed and aligned for quieter, more reliable operation. What it does:

• Covers and shields the shaft/axis from lint, debris and moisture
• Helps maintain drum alignment and stable rotation
• Prevents premature wear on the shaft bearing area
• Can reduce noise or vibration caused by a damaged or missing cover
• Used when the original cover is cracked, warped or missing

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Access typically requires removing the dryer's front or rear panel; follow your model's service manual
• Inspect mating surfaces and surrounding seals for damage; replace related parts if worn
• Use correct OEM part number when ordering to ensure proper fit

This is a factory-style refrigerator outer door that restores the appliance's appearance and helps maintain proper compartment protection and cooling. It replaces a damaged or dented exterior door panel for a clean, secure closure. What it does

• Replaces a cracked, dented or bent outer door surface to restore cosmetic appearance
• Re-establishes a solid barrier that helps the gasket seal and maintain internal temperature
• Provides the correct mounting interface for existing hinges, handles and trim
• Stops drafts and reduces moisture buildup caused by a damaged door

• One refrigerator outer door

• This part is heavy and awkward — have a helper available during removal and installation
• Disconnect power to the appliance and empty the door before starting
• Preserve and re-use existing hinge hardware, handle, gasket and trim unless replacements are specified

This is a factory-style refrigerator outer door that restores the appliance's appearance and helps maintain proper compartment protection and cooling. It replaces a damaged or dented exterior door panel for a clean, secure closure. What it does

• Replaces a cracked, dented or bent outer door surface to restore cosmetic appearance
• Re-establishes a solid barrier that helps the gasket seal and maintain internal temperature
• Provides the correct mounting interface for existing hinges, handles and trim
• Stops drafts and reduces moisture buildup caused by a damaged door

• One refrigerator outer door

• This part is heavy and awkward — have a helper available during removal and installation
• Disconnect power to the appliance and empty the door before starting
• Preserve and re-use existing hinge hardware, handle, gasket and trim unless replacements are specified

This interior oven lamp restores cavity lighting so you can check food without opening the door. It replaces a burned or flickering oven light to improve visibility while cooking. What it does:

• Illuminates the oven cavity so you can monitor cooking progress without opening the door
• Replaces a bulb that is burned out, dim, or flickering
• Helps prevent unnecessary oven door openings that can affect cooking results
• Matches the OEM form and fit for compatible GE ovens

• One oven lamp

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock
• Allow the oven to cool completely before handling the lamp or reaching into the cavity
• Use care when removing/installing the lamp—handle by the base or use a cloth to avoid oils on the glass
• Only use the lamp wattage/type specified by your appliance manufacturer

This lamp set replaces the refrigerator interior light assembly to restore illumination for easier food visibility and safe access. A direct-fit replacement that reinstates normal lighting when the original lamp is burnt out or damaged. What it does:

• Provides interior lighting so shelves and contents are visible.
• Replaces a broken, burned-out, or flickering lamp to restore consistent light.
• Works with the existing housing and door switch to activate when the door opens.
• Improves safe access and helps prevent missed spills or spoiled food due to poor visibility.

• Disconnect power before servicing to avoid shock—unplug the appliance or shut off the breaker.
• Remove the old lamp cover and assembly, then swap the socket and lamp with the replacement.
• Handle bulbs carefully; use a cloth or gloves to avoid oils on the bulb surface.
• Test the lamp by restoring power and opening the door.

This temperature control thermostat regulates your refrigerator's cooling by sensing cabinet temperature and cycling the compressor. Replacing a failed control restores consistent temperatures and normal on/off operation.

• Monitors cabinet temperature via a capillary sensing bulb
• Opens/closes electrical contacts to start and stop the cooling system
• Common symptoms of failure: too warm or too cold, runs constantly or won't run, no response to temperature dial, intermittent cooling
• Restores predictable cycling and temperature regulation

• Disconnect power before servicing
• Photograph/label wire positions; transfer any brackets/insulators from the original control
• Route the capillary tube exactly as original; avoid kinks and ensure the sensing bulb is secured in its clip/well
• After installation, set to a mid setting and allow up to 24 hours for temperatures to stabilize

This control knob replaces a worn, broken or missing range/oven temperature or function knob so you can safely and accurately set burner and oven controls. Designed to restore a secure grip and clear position indication. What it does

• Fits onto the stove or oven control shaft to select burner heat or oven settings.
• Restores a solid grip and clear pointer for accurate temperature and function selection.
• Commonly used when knobs are cracked, stripped, loose, or completely missing.
• Works with standard push-on control shafts; does not include internal switch components.

• Install by aligning the knob on the control shaft and pushing firmly until seated.
• If knob feels loose, inspect the control shaft or replace the keyed adapter if damaged.
• Always turn controls to OFF and disconnect power at the breaker or unplug the appliance before servicing.
• Do not force a stuck knob; check for debris or damage to avoid breaking the new knob.

This lamp shade is the glass light cover that protects and diffuses the appliance light bulb, restoring even interior lighting and keeping the bulb shielded from spills or debris. It replaces a cracked, chipped or missing light cover. What it does:

• Protects the interior light bulb from contact with food, moisture and debris
• Diffuses and softens the appliance light for more even illumination
• Stops rattling or loose fit when the original shade is broken or worn
• Helps prevent direct bulb exposure that can lead to faster bulb soiling

• One lamp shade / light cover

• Ensure the appliance is powered off and bulb is cool before handling
• Handle the glass carefully; wear gloves to prevent cuts and fingerprints
• Seat the shade into its mounting position and secure per the appliance's original clips or retaining hardware
• Use only the correct replacement bulb and do not force the shade into place

This evaporator door is the movable flap that opens and closes to control airflow from the evaporator section. A working door helps maintain stable temperatures and balanced cooling between compartments for consistent refrigerator performance.

• Regulates airflow from the evaporator through the air duct
• Helps keep fresh food and freezer temperatures within set ranges
• A stuck, broken, or warped door may cause warm spots, overcooling, or frost at air vents
• Can contribute to fluctuating temperatures or clicking from the damper actuator when the door won't move

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Access the air duct/damper area per your model to reach the door
• Reuse any existing clips, seals, and hardware from the original assembly
• Verify the door moves freely before reassembly; restore power and allow up to 24 hours for temperatures to stabilize

This door shelf bar is the replacement retaining rail that secures items on a refrigerator door shelf, restoring a solid hold for bottles and containers so they stay in place during normal use. What it does

• Holds and secures items on the refrigerator door shelf to prevent shifting or tipping
• Replaces cracked, broken or missing door rail that lets contents slide or fall
• Restores the door bin's original containment and organization
• Works with the corresponding door bin mounting points to lock the bar in place

• One door shelf bar

• Safety first: unplug the appliance or disconnect power before servicing
• Remove the door bin or empty the shelf area before replacing the bar
• Align the bar with the bin mounting points and press into place until it seats; do not force or bend the part

This evaporator fan motor replaces a worn or failed refrigerator fan motor to restore proper airflow through the freezer compartment and help maintain even cooling. It's a direct-fit replacement when the original fan motor stops working. What it does

• Spins the evaporator fan blade to circulate cold air from the freezer through the evaporator and into the refrigerator compartments
• Restores airflow when the fan motor has failed, helping reduce warm spots and uneven cooling
• Stops grinding, squealing, or non-spinning symptoms caused by a damaged or seized motor
• Works with the existing fan blade and mounting hardware when compatible

• One evaporator fan motor

• Disconnect power before servicing to avoid shock or injury
• Handle the motor and fan blade carefully to avoid bending blades or damaging wiring