Parts for Whirlpool WSF26D2EXF01: 03 - Refrigerator Shelf Parts

The Whirlpool EveryDrop Ice and Refrigerator Water Filter 1 is an OEM replacement part for Whirlpool refrigerators. This filter works to remove small particles from water to ensure clean, great-tasting ice and drinking water directly from the refrigerator door.  Measuring approximately 2.50 x 2.50 x 8.69 inches, this filter is easy to install. 

For optimal performance, we recommend replacing the filter every six months. The filter material is made from coconut carbon block, which has a micron rating of 0.5 and a flow rate of 0.5 gpm. The filter is designed to operate at a maximum pressure of 125 psi and an operating temperature of 38-100°.

Symptoms of a filter needing replacement include:

• Gradual decline in water/ice quality over time exhibiting muddy appearance or odd tastes
• Filter life indicator appears showing it is time for a new one 

Causes stem from normal usage over the stated capacity of the original filter. Allowing one to expire could produce unhealthy water.

This OEM replacement part is compatible with select Maytag, Jenn-Air, and Amana models as well.

This white handle trim replaces a worn, cracked or faded trim piece to restore the appliance's appearance and properly cover the handle mounting area. It provides a clean finished look and helps protect the underlying fasteners. What it does:

• Replaces damaged or cosmetically worn handle trim for a refreshed look
• Covers handle mounting hardware and helps prevent debris buildup
• Helps maintain proper fit and finish of the door/handle area
• Commonly used when trim is cracked, chipped, discolored, or loose

• Disconnect power to the appliance before servicing electrical components
• Remove handle or door trim fasteners as required per the OEM service instructions
• Handle carefully to avoid scratching the finish; use appropriate trim tools

This humidity sensor housing holds and protects the fridge's humidity/control assembly, helping maintain proper humidity-sensing operation and reliable climate control. Designed to replace a cracked or damaged housing to restore proper sensor placement and protection. What it does:

• Secures and shields the humidity sensor and related control components
• Keeps the sensor correctly positioned for accurate humidity detection
• Prevents physical damage and moisture exposure to the sensor assembly
• Helps resolve symptoms like inaccurate humidity readings or loose sensor fit

• Disconnect power to the appliance before starting any repair
• Handle the humidity sensor carefully; remove and reinstall per manufacturer guidance
• Uses basic hand tools; refer to the service manual or OEM instructions for disassembly/reassembly steps
• Replace the affected components rather than reusing damaged parts

This cover assembly replaces a damaged or cracked pan cover to protect internal components and help contain spills. It restores proper fit and helps prevent debris or moisture from reaching sensitive parts behind the pan. What it does:

• Covers and shields the appliance pan area to protect internal components from debris and moisture
• Helps maintain proper clearance and fit of adjacent panels and components
• Reduces the risk of leaks or drips reaching electrics or insulation when installed correctly
• Useful when the original pan cover is cracked, warped, or missing

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removing outer panels and fastening the cover with existing screws or clips; keep hardware for re-use unless new hardware is specified.
• Handle the part carefully to avoid cracking plastic tabs; align fitment before tightening fasteners.

The Snack Pan is an OEM part for Whirlpool refrigerators. This part stores snacks and other small food items, providing an organized and accessible storage solution within the refrigerator.  The pan measures approximately 17.25" wide at the front, 20" long, and 5" high.

Common causes of a faulty snack pan include cracks or breaks due to heavy items being placed on it, wear and tear from frequent use, or warping from exposure to temperature fluctuations.

Symptoms of a bad snack pan include:

• Cracks or splits in the pan
• Difficulty sliding the pan in and out
• The pan not fitting securely in its designated space
• Visible warping or bending

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Crisper Drawer is an OEM replacement part for Whirlpool refrigerators. Used within the fresh food compartment, this crisper creates a specialized storage area for preserving fruits and vegetables longer. Its precise sliding mechanics and vapor-sealed design maintain optimal humidity for crisping foods while preventing moisture build-up.

Causes of a bad crisper drawer include damaged seals, broken rollers inhibiting opening/closing, or cracking reducing humidity control.

Symptoms of a bad crisper drawer include:

• Warped or stuck drawer movement  
• Moisture inside the refrigerator or on stored items
• Dried out or wilted produce due to improper humidity  
• Unpleasant odors from lack of proper sealing

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore models.

This trim pan is a molded replacement trim piece that restores the lower exterior appearance and helps channel minor drips away from the appliance base. It provides a clean, finished look and replaces damaged or missing trim. What it does:

• Replaces a cracked, warped or discolored lower trim that affects appearance
• Helps direct incidental moisture away from the cabinet base
• Restores the factory fit and finish at the appliance front/bottom
• Prevents sharp edges or gaps that can catch dirt or debris

• Disconnect power to the appliance before starting work to avoid electrical hazard
• Basic hand tools are typically required; remove fasteners or clips holding the old trim and snap or screw the replacement into place
• Handle plastic trim carefully to avoid scratching; align clips or tabs before applying pressure
• If you encounter unexpected corrosion or additional damage, stop and inspect for related repairs

This replacement meat pan restores the refrigerator's deli drawer, giving you a dedicated space for meats and snacks while sliding smoothly on the existing rails. Replace cracked or missing pans to keep contents organized and contained.

• Provides a sliding storage drawer for meats and deli items in the fresh food compartment
• Fits into existing shelf rails for smooth access and organization
• Helps contain spills and prevent items from falling into lower areas
• Replace if the drawer is cracked, broken, warped, missing, or no longer slides/stays on its tracks

• Remove food from the drawer and slide the old pan straight out of the rails
• Inspect/clean the rails and check for bends before installing the new pan
• Transfer any removable trim or accessories from the old drawer, if present
• Align with the rails and slide in until fully seated; do not force

This trim pan is a molded replacement trim piece that restores the lower exterior appearance and helps channel minor drips away from the appliance base. It provides a clean, finished look and replaces damaged or missing trim. What it does:

• Replaces a cracked, warped or discolored lower trim that affects appearance
• Helps direct incidental moisture away from the cabinet base
• Restores the factory fit and finish at the appliance front/bottom
• Prevents sharp edges or gaps that can catch dirt or debris

• Disconnect power to the appliance before starting work to avoid electrical hazard
• Basic hand tools are typically required; remove fasteners or clips holding the old trim and snap or screw the replacement into place
• Handle plastic trim carefully to avoid scratching; align clips or tabs before applying pressure
• If you encounter unexpected corrosion or additional damage, stop and inspect for related repairs

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation