Remington Chainsaw Parts

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

This cutting chain is a genuine MTD part, sold individually. This cutting chain can be used as a replacement part for a chainsaw. The cutting chain chops through wood and other materials while the appliance is in operation.The cutting chain of a chainsaw might have to be replaced at some point within the standard lifespan of the appliance. If the teeth of the cutting chain wear out, the chain should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This cutting chain is compatible with the following outdoor appliance brands: MTD and Craftsman.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

This air filter is a genuine MTD part, sold individually. This air filter can be used as a replacement part for a chainsaw. The purpose of an air filter for a chainsaw is to block out debris from entering the interior workings of the appliance, which can protect the small engine from damage over time.The air filter of a chainsaw might have to be replaced at some point during the standard lifespan of the appliance if the component is punctured, torn, ripped, scraped, eroded, or otherwise damaged. If external materials can easily pass through the air filter from general wear and tear with long-term use or as the direct result of a collision, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter is compatible with the following outdoor appliance brands: MTD and Craftsman.

This spark plug is a genuine MTD part, sold individually. This deck assembly can be used as a replacement part in a chainsaw. The spark plugs ignite when supplied with a mixture of fuel and air, powering the equipment.If the spark plug has been damaged due to exposure to the elements, general wear and tear, or an accidental collision with a hard object, it should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spark plug is compatible with the following outdoor appliance brands: MTD and Craftsman.

This part is a replacement adjustment block. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective adjustment block in outdoor power equipment.This adjustment block is essential to proper equipment functionality and will need to be replaced if broken, faulty, detached, or ineffective in any way. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this adjustment block, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this adjustment block is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is an adjustment block. It is a genuine replacement part made by MTD. This part is usually found in chainsaws and allows the user to adjust the tightness and position of the chain that is being used. A new adjustment block might be needed if the user notices that the current chain is becoming lose or being moved from its original position and the user cannot adjust it. The adjuster block can become damaged over time due to normal wear and tear and it is recommended that it be replaced if this is the case. Be sure to refer to the specific user manual for more information on replacing this part. This adjustment block is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This replacement part is a chain and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This chain is found in power equipment such as a chainsaw. The chain is responsible for cutting or shredding branches or other landscaping. A new chain might be needed if the user notices that the current one is worn down and not cutting as efficiently as in prior uses. After years of normal wear and tear it is not unusual for chains to become dulled or worn down. To fix this simply replace the chain and the appliance should be good as new. Be sure to wear work gloves while attempting this repair as the new chain will be very sharp and can injure those who touch it. This chain is sold individually and is sourced directly from the manufacturer to ensure a proper fit on different chainsaws. This part is a genuine OEM replacement part.

This cutting chain is a genuine MTD part, sold individually. This cutting chain can be used as a replacement part in a chainsaw. The purpose of the cutting chain in a chainsaw is to utilize the teeth on the outside of the chain to rotate and chop through wood and timber when in operation.The cutting chain in a chainsaw might be subject to replacement if the teeth break off or that the chain cannot rotate as usual when propelled to do so by the engine. If the teeth of the cutting chain are dented, warped, cracked, punctured, or eroded, the cutting chain should be removed and replaced by this genuine OEM replacement part. This could occur from general wear and tear over long-term use or as the result of an accident with the chainsaw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. This cutting chain is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Murray.