Remington Chipper Shredder Parts

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This part can be used to replace a deteriorating or broken throttle linkage spring, which helps to regulate the speed of outdoor power equipment.As throttle linkage springs age they begin to wear out or can easily break. This can cause serious problems with regulating the speed of outdoor power equipment such as lawn mowers and trimmers. A broken or weak throttle linkage spring will stop the throttle on the equipment from returning to the off or resting position when the throttle is released. This can be dangerous. This throttle linkage spring is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement throttle linkage spring fits various different MTD, Cub Cadet, Craftsman, and Troy-Bilt models of lawn mowers, log splitters, and trimmers. Please note that this part is sold individually.

This part is a carburetor stud. A carburetor mixes fuel and air before delivering it to the engine. The carburetor stud, often called carb stud, is used to ensure a tight seal between the carburetor and the intake manifold. It is important that air and other dirt or debris do not enter the engine, and so this seal between the carburetor and the intake manifold is very important.A carburetor stud may need to be replaced if it is stripped or worn. Of course, a new carburetor stud will be needed if it is missing. If the carburetor and the intake manifold do not have a tight seal, it could be possible that new carburetor studs are needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific carburetor stud is compatible with engines, lawnmowers, and log splitters manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This screw is a genuine Midwest Engine replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to link materials together by piercing into the materials and then rotating it until the materials are firmly clasped together.It is likely that a screw will have to be replaced at some point in the lifespan of an appliance due to simply losing or misplacing the screw. If the materials that are generally supposed to be held together seem to be loosening or have come apart, it is likely that the screw has either fallen out or has undergone damage that has warped it. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: MTD, Cub Cadet, Troy-Bilt, and Yard Machines. This part sold individually.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

Lawn equipment and other machines with small gas-powered engines have fuel tanks that require a fuel tank lower grommet to keep the fuel from leaking. This grommet is located near where the fuel filter and neck meet. With use and over time, the fuel tank lower grommet may wear out or get lost. Leaking fuel is a clear indication that there is a problem with the lower fuel tank grommet. If this occurs, the part will have to be replaced to prevent further leakage and device failure.Before replacing a lower fuel tank grommet, empty the fuel tank completely. Wear gloves for protection. Push the replacement part in the hole and turn slightly to push the piece in. If necessary, use a screwdriver to push in to get a secure fit.This fuel tank lower grommet is an authentic OEM part sourced from the manufacturer. The fuel tank lower grommet is compatible with MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt machines. It can be used in various devices, including lawnmowers, log splitters, trimmers, and other engines. It is made of high-quality material and sold as an individual unit.

This shroud debris cover is a genuine MTD part, sold individually. This shroud debris cover can be used as a replacement part in a string trimmer. The purpose of the shroud debris cover in a string trimmer is to protect the appliance fromdebris within the internal mechanisms of the appliance, reducing the risk of damage to the infrastructure.The shroud debris cover might need to be replaced if the cover is damaged or compromised to the point that external materials can pass into the appliance and accumulate. The shroud debris cover could be dented, punctured, scraped, torn, scratched, eroded, warped, or otherwise damaged; if this occurs, the shroud debris cover should be removed and replaced by this genuine OEM replacement part, in accordance with the instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shroud debris cover is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This lower handle is a genuine MTD part, sold individually. This lower handle can be used as a replacement part in lawnmowers, leaf blowers, and wood chippers. The purpose of the lower handle for one of these outdoor appliances is to allow the operator to grab onto a steady support in order to steer the appliance by hand.The lower handle for one of these outdoor appliances might need to be replaced at some point within the typical lifespan of the appliance if the lower handle is punctured, dented, cracked, warped, eroded, or otherwise damaged to the point that a basic repair cannot fix the functionality of the component. If this occurs, the lower handle should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This lower handle is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard-Man.

This tray bracket is a genuine MTD part, sold individually. This tray bracket can be used as a replacement part in a lawn mower or a log splitter. This part secures the splitter's tray.The tray bracket could be punctured, dented, warped, eroded, or could simply detach from the lawn mower or log splitter. If this occurs, the tray bracket should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This tray bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard Machines.

This back plate (sometimes just called a plate) is a genuine MTD part. It is manufactured as a replacement part for log splitters and some models of lawn mowers.On a log splitter, the back plate is a safety feature and also helps deliver pressure. It is not uncommon for the back plate to become damaged or broken through normal use of the log splitter. If this happens, it is important to replace promptly as the machine may no longer function or be safe to use. This back plate is a genuine OEM part sourced directly from the manufacturer. It is sold individually. A wrench is required to make this repair. It is designed for compatibility with machines made by Craftsman, White Outdoor, Remington, MTD Gold, Yard Machines, Columbia, Troy-Bilt, and Cub Cadet.

This is a quality clevis pin that is specifically designed for use with wood chippers and log splitters. The clevis pin is a secure and easily installed fastener that is often used in the place of rivets and bolts. As with other fasteners, the clevis pin is durable and long-lasting but wear and tear or use of the equipment can cause damage. If the clevis pin is damaged, broken, or has been lost, it will need to be replaced.When replacing a clevis pin, the tool should be powered off. Remove the spark plug wire and place the tool on a sturdy surface during the replacement process. The clevis pin may be located in various places depending on the model. Use the user's manual to determine where to get access to it. Remove the old pin and replace it with a new one before reassembling the machine.This clevis pin is sold on an individual basis. The component is designed to be compatible with lawnmowers, wood chippers, and log splitters manufactured by MasterCut, Yard-Man, MTD, Yard Machines, Ryobi, Cub Cadet, and Craftsman. This is an authentic OEM replacement part that is sourced directly from the manufacturer.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This is a muffler assembly that is used with many types of lawn and garden equipment from major manufacturers. The part is connected to the exhaust tube and is tasked with reducing the noise made by the exhaust. As time goes on, the muffler assembly can start to become damaged or malfunction and may need to be replaced. When replacing the muffler assembly, make sure the spark plug is removed and the equipment is powered off. It should be placed on a stable surface during the replacement process. Take the bolts out of the muffler and remove them from the engine. Take the bolts from earlier and install them into the replacement muffler. Install the gaskets, heat shield, and other parts before placing the new muffler into the lawn equipment. Reassemble all parts before using the tool.The muffler assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to be used with lawnmowers, tillers, leaf blowers, log splitters, and wood chippers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, MTD, and Yard Machines. This component is sold as an individual item.