Remington Chipper Shredder Parts

Replace a worn, broken, or damaged camshaft assembly in your lawn mower or outdoor power equipment engine. Restores proper valve timing and function.

This replacement part is an external gasket kit, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This gasket kit is different from typical gasket kids as they are used on the external side of the engines. These gaskets are still very important to the engine as a whole and allow it to run smoothly during use.A new external gasket kit might be needed if the current one is broken or damaged. If there are noises coming from inside the machine it is possible that the parts of the gasket are out of place or could be malfunctioning. Be sure the engine of the appliance is completely powered down and cooled off before replacing the gasket kit as this area can be hot from use.Be sure to reference the specific user manual prior to beginning this repair. Note that this is a genuine OEM replacement part and is told individually. This part is sourced directly from the manufacturer.

This oil fill plug is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. An oil fill plug keeps the oil where it is supposed to be in the machine. It is designed for use with snowblowers, tillers, leaf blowers, wood chippers, and log splitters. It is compatible with products from brands such as Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and MTD.The oil fill plug is crucial in preventing oil from leaking as well as clearing the path upon removal for any needed oil changes. It is removed when the oil needs to be drained. The replacement or repair process of the oil fill plug should be straightforward, though it may be helpful if the owner or operator uses a socket wrench to aid in the replacement process. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Governor arm shaft for small engines on lawn and garden equipment. Connects governor assembly to carburetor. Replace if worn, damaged, or broken.

This is a genuine OEM primer hose replacement part sourced directly from the manufacturer. It is used on tillers and other outdoor power equipment with a primer bulb assembly. The hose is the part of the assembly that runs from the fuel tank to the carburetor. When the primer bulb is pressed, fuel is collected from the tank and pushed into the carburetor to start the engine. Any unused fuel is released back into the fuel tank. If the primer hose has cracks or holes in it, the vacuum inside the hose will be lost and the primer bulb will not force the fuel to the carburetor. These cracks or holes can occur over time due to fuel eroding the hose material. If the primer bulb is not working and fuel cannot be seen in the tube, the primer hose should be inspected and replaced if necessary.Before replacing a primer hose, empty the fuel from the fuel tank and fuel lines into a clean container. Remove the spark plug. Remove and replace the primer hose. After refueling, check the primer bulb to ensure the primer hose is pulling fuel. This primer hose is clear plastic material; it is sold as an individual unit. This hose is compatible with tillers, chippers, shredders, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

Pistons are essential for proper engine function. When expanding gases push the piston, it turns the crankshaft. When the piston compressed the fuel-air mixture, the spark ignites and causes combustion. If the pistons are going bad, owners might notice white or gray exhaust smoke, low power when accelerating, loss of performance, or excessive oil consumption.Pistons may need to be replaced for any number of reasons. They could have damage to their crown, which could be caused by overheating. There could be impaction marks if they were not installed correctly or if the valve timing is incorrect. The pistons could be fused or have elements that have melted, or there could be cracks in the piston. Any of these issues would necessitate a replacement.This piston is used for select small engines from MTD, Troy-Bilt, Yard Machines, Columbia, and Cub Cadet. Each piston is sold individually and is a genuine OEM part sourced from the manufacturer. Those who need to replace more than one piston will need to buy them separately.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.