Remington Lawn Mower Parts

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

The primer bulb is a small plastic piece that will draw fuel from the fuel reservoir and into the carburetor when it is pressed down. This ensures that the fuel can get into the carburetor so that combustion can happen in the engine. If the primer bulb is broken or damaged on the engine, it will mean that the carburetor will not be getting the fuel it needs to get the engine to start. In some cases, the engine might not start at all. Other times, it might take a while to get the engine to start. These could indicate that it is time to replace the bulb. This is an OEM replacement part that is sold individually. It will work with lawnmowers and other types of small engines. The bulb is compatible with a range of different popular brands including Toro, Kawasaki, Cub Cadet, MTD, and Craftsman.

This fuel tank assembly can be used as a replacement part for the small engine of a snowblower or a tiller. The fuel tank assembly contains the fuel tank as well as the parts required to install the part. The purpose of the fuel tank is to store fuel for the engine and dispense the fuel in order to power the engine.A fuel tank assembly might be ordered as a complete replacement part if the fuel tank and its components suffer damage. This damage might manifest in the form of fuel leakages from punctures, holes, or corrosion to the material. If this damage affects the fuel tank and its components, it should be removed and replaced before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This fuel tank assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Cub Cadet.

The recoil starter assembly is comprised of the housing, the recoil spring, the starter pulley, the starter rope, and the plastic starter grip. It creates the motion that spins the flywheel to engage the engine. The grip is pulled, which extends the rope and activates the starter spring, which then engages the starter pulley and the flywheel, respectively. Over time, various components of the recoil starter can become damaged or worn with regular use. This is often going to require a replacement and in most cases, it will be easier to replace the entire assembly than a single component. This genuine OEM recoil starter is manufactured by MTD and is made to exact standards. It can be used with more than 150 MTD engines on lawn equipment, including from brands like Craftsman, Bolens, Yard-Man, Yard Machines, Remington, Husky, RYOBI, and Cub Cadet. This replacement assembly includes a limited parts warranty and includes all components: the plastic housing, starter pulley, pull rope, starter grip, and starter spring. The hardware for securing this housing is sold separately.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This part is an ignition coil assembly. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, detached, or broken ignition coil on certain outdoor power equipment models. Ignition coils are essential for transforming battery voltage into an electrical spark to ignite fuel and start the engine. Over time and with regular usage, ignition coils can easily become worn out and affect the performance of outdoor power equipment. Signs of a failing ignition coil include engine misfires, inability to start equipment, and rough idling. Please be aware that proper tools are needed to replace this part and correct safety measures should always be followed when working on any type of equipment. For the most accurate information on installing this replacement ignition coil, specific manufacturer diagrams should always be referenced.As an authentic replacement part, this ignition coil assembly can be used on multiple different models of Craftsman, Cub Cadet, Troy-Bilt, MTD, and Husky snow blowers. Please note that this ignition coil assembly is a genuine part made of high-quality materials and is sold individually.