Remington Log Splitter Cap, Lid & Cover

This fuel cap assembly can be used to easily replace a worn-out or broken fuel cap.Fuel caps have one primary purpose, to keep fuel in the fuel tank and prevent it from spilling or becoming contaminated. This fuel cap is made of top-quality, durable plastic and includes a retainer that fixes to the neck of the tank itself to prevent the cap from becoming detached. Fuel caps are essential, as without them, the fuel in the outdoor equipment machine can easily become filled with dirt and debris that can contaminate the engine and cause more serious problems. This fuel cap assembly is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel cap fits various different MTD, Cub Cadet, Craftsman, and Yards Man models of lawn mowers, log splitters, and trimmers. Please note this fuel cap assembly is sold individually.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

A valve cover is a small but important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a snow blower or a tiller. It is compatible with products by brands such as MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Bolens, and Husky.The valve cover part is crucial because it plays a big role in keeping the engine protected and healthy. The valve cover is a type of casing that can be found on the top of the machine's engine. It covers the valves of the engine, which in turn protects the machinery from the elements and prevents oil leaks. Over time, natural wear and tear with exposure to the elements will occur, leaving evidence on the valve cover in the form of cracks, corrosion, and misalignment of the valve cover. If the valve cover shows signs of wear such as these listed, it can make fluid leak into the engine compartments. If this happens, it is very serious and will ultimately lead to engine failure.The replacement or repair process of the valve cover should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This valve cover is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This air filter cover is a genuine OEM replacement part sourced directly from the manufacturer. It is designed to fit various lawn and garden engines. The air filter cover is a durable plastic piece that snaps to the machine to cover the air cleaner and filter to protect them from external dirt and debris that would shorten the filter's lifespan. This cover is exposed to the elements, and may be damaged by rocks and other debris during machine use. Normal wear and tear due to age can also lead to the cover's damage. If the cover is damaged, it should be replaced. The machine should not be operated without a functional air filter cover.Wear gloves when doing any work on the machinery. Unsnap the cover and remove it from the machine. Remove the spark plug before starting to prevent accidental engine operation. While the cover is off, check the air filter and air cleaner. If necessary, change these out while the cover is being serviced. Snap the new cover into place. This air filter cover is made of durable black plastic. It is sold as an individual unit that is compatible with tiller engines and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This oil fill plug is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. An oil fill plug keeps the oil where it is supposed to be in the machine. It is designed for use with snowblowers, tillers, leaf blowers, wood chippers, and log splitters. It is compatible with products from brands such as Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and MTD.The oil fill plug is crucial in preventing oil from leaking as well as clearing the path upon removal for any needed oil changes. It is removed when the oil needs to be drained. The replacement or repair process of the oil fill plug should be straightforward, though it may be helpful if the owner or operator uses a socket wrench to aid in the replacement process. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

A carbon canister filter cap is an essential piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, wood chippers, string trimmers, log splitters, and edgers. It is compatible with products by brands such as Craftsman, Cub Cadet, and MTD. This carbon canister filter cap is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The purpose of the carbon canister filter cap is to prevent harmful fumes or chemicals from entering the environment.The replacement or repair process of the carbon canister filter cap should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Engines, even small engines, get quite hot. Muffler shields like this one are used on small engines, like those found in log splitters, to help protect from this heat. Without a muffler shield, the engine could cause burning, which can be dangerous. If there is an issue with the heat shield, owners will want to replace it as soon as possible.Although muffler heat shields are made from metal and are meant to be durable, they could still need to be replaced eventually. They could crack or bend, or they could become corroded over time. Regardless, if there is a problem with the muffler shield, it should be replaced. Wait until the machine is cool before making any repairs.This muffler shield works with many models of small engines from manufacturers MTD, Craftsman, Columbia, Yard Machines, Cub Cadet, and Troy-Bilt. The shield is sold individually and is a genuine OEM part sourced from the manufacturer.