Remington Log Splitter Valve & Float

This valve spring retainer is a genuine OEM replacement part that is designed for use with select snowblowers and snow throwers. The valve spring retainer is responsible for holding the valve spring in place, which then controls the valvetrain. The retainer secures the spring so that it can provide the right amount of pressure to ensure that the system can operate without valve b, which can damage the engine or cause faulty operation. If the valve spring retainer fails or is damaged, which can happen with regular use over time, it will need to be replaced to ensure the spring remains in place during the operation of the machine. The retainer is a metal collar-type piece and although it is durable, it could wear out or break due to several different potential situations. Regardless of the cause, a replacement must be made with an OEM part like this. This genuine part is manufactured to specific OEM standards by MTD, and is compatible with more than 150 units from MTD, Yard Machines, Yard Man, Troy-Bilt, Husky, and Cub Cadet. It is sold individually. Be sure to wear gloves and allow the unit to cool completely before performing any type of repairs.

This part is a replacement valve spring. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken valve spring in a variety of snow blower models. Valve springs are essential to the proper functionality of the snow blower, as they enable different components to move seamlessly. Springs are subject to wear and tear, which may include stretching, corroding, or snapping. If they are rendered ineffective, they will need to be replaced with a genuine OEM part. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this valve spring, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this valve spring is suitable for use on line trimmers manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This genuine Midwest Engine valve cover can be used as a replacement part for the small engines of outdoor appliances such as lawn tractors, lawn tractors, snowblowers, wood chippers, leaf blowers, tillers, and edgers. The function of a valve cover is to prevent dirt and debris from entering the infrastructure of the engine as well as to prevent engine oil from leaking. The valve cover of a small engine outdoor appliance might have to be replaced if it suffers damage that results in oil leakages or accumulation of dirt and debris in the engine. Symptoms of damage to the valve cover can include oil leaking from the valve cover or the surrounding area, consistently low oil levels even after refilling, engine misfires, or oil dripping into the exhaust and emitting a burning smell. Before more severe damage occurs, it is best to remove and replace the damaged valve cover. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This valve cover is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Lawn-Boy, MTD, Craftsman, and Cub Cadet. This part is sold individually.