Parts for Tecumseh OVRM120-22032E: Cylinder / Flywheel / Rewind Starter Parts

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a genuine replacement screw designed for Tecumseh engines installed on Toro lawn mowers. While screws are used for many purposes on the engine and mower body, this screw is usually found holding the starter grille in place over the rewind starter. The grille serves a number of important purposes, including allowing airflow, preventing large debris from binding up the starter, and more. In most cases, screws do not suffer from wear and tear. However, there are many ways they might be damaged. Removing the screw with the wrong tool might round the head, for instance. The screw may also be rusted in place if the mower is left unprotected in the elements. Replacing the grille screen screws is a simple process and requires little more than a wrench or the appropriate socket and ratchet. Simply unscrew it, dispose of it, and install the new screw. This screw is made from metal for better durability and is a genuine OEM replacement part. It is sold individually and works with Toro mowers with Tecumseh engines. It is also compatible with Craftsman, Lawn-Boy, and Cub Cadet mowers.

This is a genuine replacement hex screw that is used in select outdoor power equipment engines. The hex screw is a generic, general use part that has several applications depending on the unit. It is small, so it may be lost or misplaced over time or during repairs. These durable metal screws are also known to wear due to the constant exposure to high heat and vibrations. If screws are damaged or go missing, they will need to be replaced in order to ensure the machine is safe to operate.Whenever replacing small parts, it is a good idea to wear gloves and keep a magnetic tool around in case screws fall into the engine. Always allow the engine to cool completely before working on power equipment. A Torx screwdriver or socket wrench will be required to replace this part. This hex screw is a genuine OEM part manufactured to exact standards by Tecumseh and designed for use in machines and engines from the brand along with those from Husqvarna, Toro, and Lawn Boy. Typically, these screws are found in lawnmowers, but they can be used in other equipment as well.

This is a genuine engine recoil starter cup that is designed for use in several different styles of outdoor lawn and garden equipment engines. This engine recoil starter cup is part of the starter recoil assembly and is used to attach various parts to the engine. The starter cup's primary role is to engage the flywheel when the starter rope is pulled. Although it is made of durable metal, this part can become warped or otherwise damaged over time and with constant exposure to high temperatures. If the part fails to work, the engine may not be able to engage until it is replaced. This engine recoil starter cup is manufactured by Tecumseh and is an OEM replacement part. It works with several models of outdoor power equipment engines, including those in machines from Craftsman, Sears, Lawn Boy, MTD, Troy-Bilt, and Tecumseh. The part is sold individually and does not include hardware. Allow the engine to cool completely and wear gloves for hand protection whenever performing engine repairs. If additional parts of the starter recoil assembly need to be replaced, those will require an additional purchase.

This filler tube is designed for use on lawnmowers as a part of the oil system. The tube sits inside of the crankcase and has a rubber seal to prevent any leaking between the two components. It allows people to test the oil level using a dipstick. It is made of durable plastic but may experience damage or breakage over time. If the filler tube for a lawnmower is broken or cracked, leaking can occur. Taking a look at the tube will give an indication of whether the part is in good shape. If there is any issue with the tube, it needs to be replaced. The filler tube attaches to the lawnmower using a screw so a screwdriver is needed for the repair. Simply unscrew the old filler tube and place the replacement component in its place. Put the screw back in and tighten it before using the lawnmower. This filler tube is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual part. The tube is compatible with lawnmowers from Craftsman, Lawn-Boy, Toro, and Tecumseh. It comes with gaskets to fit several different types of lawnmowers.

The Lawn & Garden Engine Service Back Cover is an essential component for maintaining the performance and longevity of your lawn and garden engine. This genuine OEM part ensures a precise fit and reliable protection, keeping your engine's vital components safe from dust, debris, and other environmental factors. Crafted from durable materials, the service back cover not only safeguards your engine but also enhances its overall functionality. By replacing a cracked, missing, or damaged cover with the Lawn & Garden Engine Service Back Cover, you can ensure your equipment operates smoothly and efficiently. This part is designed for easy installation, allowing you to perform repairs and maintenance with confidence. Compatible with a wide range of lawn and garden engine models, this genuine OEM part provides peace of mind by delivering the quality and performance you expect from Samsung. Invest in the Lawn & Garden Engine Service Back Cover to protect your engine and extend the life of your equipment, ensuring you can tackle your outdoor projects without interruption.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.

The recoil starter assembly is a replacement for the starter on lawn equipment. It has been sourced from the original equipment manufacturer to ensure a proper fit. The assembly allows users to start up their equipment by pulling on the starter rope. This causes the cogs to engage with the drive cup on the flywheel, so the engine can start. Over time, this assembly can start to have some wear and tear issues and might need replacement. It might have cracks or pieces broken off, including on the interior of the assembly. This could make it more difficult, or even impossible, to get the engine to start. Replacing the entire assembly could be the needed fix. The genuine OEM part is a complete assembly that includes the plastic shroud, the recoil spring, starter pulley, pull rope, and handgrip. The part can be used with lawn mowers, pressure washers, wood chippers, and other small engines. It is compatible with Tecumseh, Toro, Lawn-Boy, Cub Cadet, Craftsman, and Briggs & Stratton.