Room Air Conditioner Blower Wheel Or Fan Blade

This replacement propeller is used on the outdoor fan of room air conditioners. It mounts to the condenser fan motor shaft to move air across the condenser coil, restoring heat rejection and airflow when the original blade is damaged or unbalanced. What it does:

• Moves outdoor air through the condenser coil to expel heat
• Helps address poor cooling caused by weak or no condenser airflow
• Replaces cracked, warped, or loose blades that cause vibration or scraping noises
• Symptom check: outdoor fan not spinning, weak airflow, rattling, or visible blade damage

• Includes: 1 propeller

• Disconnect power before servicing; wear gloves—blade edges can be sharp
• Note blade orientation and hub depth on the motor shaft before removal
• Remove the fastener/set screw and pull the old blade straight off; avoid bending coil fins
• Install the new blade in the same orientation, secure firmly, then test run

This axial flow fan moves air through the appliance to help cool internal components and support proper airflow. Replacing a worn or damaged fan restores quiet operation and helps prevent overheating-related issues. What it does:

• Circulates air across internal components or heat exchangers to maintain proper operating temperatures
• Helps prevent overheating of electronics, motors, or heating elements
• Reduces abnormal noise caused by worn or imbalanced fan blades or bearings
• Supports consistent airflow for reliable appliance performance

• One axial flow fan assembly

• Disconnect power to the appliance before starting any repair
• Handle the fan blades carefully to avoid damage; align properly during installation
• Verify secure mounting and electrical connections before restoring power
• Test appliance operation after installation and observe for proper airflow and quiet operation

This evaporator blower fan blade circulates cold air through the refrigerator to maintain even cooling and proper frost control. Replacing a worn or broken blade restores airflow and helps the appliance cool more consistently. What it does:

• Spins on the evaporator motor to move air across the evaporator coils
• Promotes even temperature distribution inside the fresh-food and freezer compartments
• Helps prevent frost build-up by maintaining steady airflow
• Commonly replaced when airflow is weak, the fan is noisy, or the blade is cracked or broken

• One fan blade

• Disconnect power before accessing the evaporator/fan area to avoid shock or injury
• Handle the blade carefully to avoid bending fins or damaging the motor shaft
• The motor shaft and mounting hardware are intact before installation

The Fan Blade is an OEM replacement part for Frigidaire window air conditioners. Located inside the unit behind the protective grill, the fan blade rotates to circulate cooled air throughout the room. Made with corrosion-resistant materials, the precisely balanced blade withstands constant rotation during seasonal operation.  

Symptoms of a bad fan blade include:

• Excessive vibrations or strange noises from the AC unit  
• Reduced air circulation felt in the room
• The blade visibly rubbing or hitting the fan enclosure

Causes can be dirt buildup causing imbalance, broken blade tips from impacts, or loosened set screws allowing shaft wobbling over extended use. 

Replacing this OEM Frigidaire part restores smooth, powerful air distribution. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.

This blower wheel spins inside the dryer to move heated air through the drum and vent, restoring proper airflow for faster, more even drying. Replacing a worn or damaged wheel helps reduce overheating and drying time. What it does:

• Drives airflow from the heater and drum to the exhaust vent for effective drying
• Restores airflow if a cracked, warped, or broken wheel causes weak air movement
• Helps stop rubbing or scraping noises caused by a damaged wheel
• Reduces the risk of overheating when airflow is restricted

• Disconnect power (unplug electric or switch off gas supply and unplug) before starting any repair
• Access typically requires removing the dryer front or rear panel and the drum; follow your model's service manual
• Inspect shaft, motor coupling, and mounting hardware; replace worn fasteners or bearings as needed
• Ensure correct alignment and secure fastening during reassembly