Parts for Ge AEM24DTH1: Room Air Conditioner Parts

This is an air filter designed for a room air conditioner unit. It captures dust, debris, and airborne particles before air passes through the evaporator coils, helping maintain efficient cooling and clean airflow. Replace this filter if it is torn, heavily soiled beyond cleaning, or if you notice reduced airflow or diminished cooling performance from the unit.

A small connecting foam sponge used to cushion and insulate contacts between appliance components, helping reduce vibration and prevent air leaks. Fits into compact gaps where soft, compressible padding is needed to protect parts and improve sealing. What it does:

• Provides a soft, compressible barrier to cushion components and reduce vibration noise
• Acts as a small insulating seal to limit air gaps that can affect cooling or airflow
• Helps prevent metal-to-metal contact and abrasion between adjacent parts
• Useful where simple, flexible padding is needed for spacing or minor sealing

• Verify the correct placement by comparing to the old foam before removing it
• Clean and dry mounting surfaces so the foam seats properly; use appropriate adhesive only
• Avoid compressing the foam excessively; it should fit snugly without deforming surrounding parts
• Disconnect power to the appliance before accessing internal areas; follow all safety and manufacturer guidelines

This nut-washer secures appliance assemblies where a captive nut and flat washer are needed, helping keep fasteners tight during normal operation. It's a small replacement part that prevents loosening and maintains proper component alignment. What it does:

• Acts as a combined nut and washer to fasten components and distribute load
• Keeps threaded connections from backing off due to vibration
• Restores secure attachment when the original nut-washer is damaged, stripped, or missing
• Commonly replaced when assemblies wobble, rattle, or come loose

• One nut-washer

• Disconnect power and unplug the appliance before beginning any repair
• Use the proper screwdriver or socket to avoid rounding the fastener
• If threads are damaged, replace the mating screw or stud rather than over-tightening

A small flat washer used as a replacement fastening spacer that helps secure bolts and prevent metal-to-metal wear. Restores proper spacing and fastener tension so assemblies stay aligned and tight. What it does:

• Acts as a spacer and load-distribution surface under a bolt or nut
• Prevents fasteners from loosening and reduces metal wear at contact points
• Restores correct alignment where a missing or worn washer caused vibration or rattling
• Simple, durable replacement for worn or corroded washers in mechanical assemblies

• Disconnect power before servicing electrical appliances to avoid shock
• Use appropriate hand tools; replace with the same style and thickness for correct fit
• Inspect mating fasteners and surfaces; replace any damaged hardware

Air conditioner not cooling or blowing weak air? A faulty blower wheel reduces airflow and cooling. This fan wheel replacement restores proper circulation.

Air conditioner not cooling or making noise? This evaporator fan motor circulates cold air to maintain even temperatures. Restore proper airflow.

This spring washer provides resilient tension to help keep screws and bolts from loosening on appliance assemblies. It's a simple replacement part that restores proper fastener tension and helps maintain secure connections. What it does:

• Applies spring force around a fastener to resist vibration-related loosening
• Commonly used on panels, brackets, and components that see movement or vibration
• Can reduce rattling and intermittent connection issues caused by loose hardware
• Works with 6 mm-diameter fasteners where a small lock-style washer is required

• Disconnect power and unplug the appliance before servicing
• Use the correct 6 mm fastener and proper orientation when reinstalling
• Tighten hardware to the OEM's recommended torque if available; avoid overtightening
• If other fasteners or parts are damaged, replace them to ensure a secure repair

A small mounting nut used to secure components and panels on compatible appliances. Replaces a loose or missing nut to restore stable, safe fastening and reduce rattling or wobble. What it does:

• Secures panels, brackets, or assemblies to the appliance frame
• Prevents fasteners from backing out during normal operation
• Helps stop rattling, vibration noise, and loose-fitting parts
• Restores proper alignment for attached components

• Disconnect power and water before beginning any repair
• Match threads and size before installation; hand-start the nut to avoid cross-threading
• Tighten securely with the correct socket or wrench, but do not overtighten
• If the original fastener was damaged, replace the mating bolt/stud as needed

Fix noisy operation or overheating in your room air conditioner. This axial flow fan circulates air across internal components to restore cooling.

This 8 mm diameter gasket creates a reliable seal in appliance assemblies to help prevent leaks and loss of pressure or airflow. It's a small replacement part that restores proper sealing where a worn gasket is causing issues. What it does:

• Seals joints and connections to help prevent water or air leaks
• Restores tight fit where a cracked, brittle, or flattened gasket allows seepage
• Reduces vibration noise from loose or poorly sealed parts
• Helps maintain proper operation of the sealed compartment or fluid path

• One 8 mm diameter gasket

• Disconnect power and water supply (when applicable) before servicing the appliance
• Remove old gasket and thoroughly clean mating surfaces before installing the new gasket
• Ensure the gasket is fully seated and aligned along the entire contact surface for an effective seal

A small circular rubber gasket designed to provide a reliable seal where a 8 mm diameter gasket is specified. Helps prevent air, moisture, or dust from passing through a joint or opening in the appliance. What it does:

• Creates a tight seal around shafts, openings, or mating surfaces to reduce leaks and drafts
• Cushions and protects components from vibration and wear
• Helps maintain correct airflow or pressure paths inside the appliance
• Common replacement when a worn or cracked seal causes unwanted noise, moisture, or air loss

• One 8 mm diameter gasket

• Inspect mating surfaces and clean thoroughly before installing the new gasket
• Replace only with the exact gasket size specified for your appliance to ensure proper sealing
• If adhesive or a retainer is used, follow the appliance manufacturer's instructions for secure attachment
• Disconnect power or follow appliance safety procedures before servicing

This M8 nut secures components to an M8 stud or bolt, restoring a firm mechanical connection. Use it to replace a missing, stripped, or loose fastener so panels and brackets stay properly attached. What it does:

• Threads onto an M8 bolt or stud to lock parts together.
• Prevents components from working loose due to vibration.
• Commonly used on brackets, mounts and assemblies that require an M8 fastener.
• Replacing a worn or missing nut can stop rattling, movement, or misalignment.

• Disconnect power and follow appliance safety procedures before servicing.
• Use the correct sized wrench or socket to avoid rounding the nut.
• Tighten to the manufacturer's recommended torque where available; do not overtighten.
• Inspect mating bolt/stud threads and replace if damaged.

Replacement mounting screw for room air conditioner assembly. Secures cabinet panels and internal components. Needed when original is stripped or missing.

Side curtain panel for window air conditioners. Fills gap between unit and window frame. Replace if cracked, broken, or missing for proper fit.

Cabinet support plate for room air conditioners. Mounts inside the unit to provide structural reinforcement. Replace if cracked, bent, or missing.

This molded form gasket provides a replacement seal designed to restore a tight closure and reduce air or water leakage. It helps maintain proper appliance operation by replacing a worn or damaged seal. What it does:

• Seals the mating surface to prevent air or water from leaking out
• Helps reduce frost build-up or moisture-related pooling when the seal is compromised
• Restores door/compartment closure where a deformed or torn gasket allows gaps
• Commonly replaced when gasket shows visible cracks, gaps, or continual leaks

• Disconnect power and remove any stored items before replacing the gasket
• Clean and dry the sealing surface thoroughly to ensure a proper fit
• Align the gasket into the channel and press evenly; some trims may require careful seating along the entire edge
• Inspect surrounding trim and hardware; replace or tighten as needed for a complete seal

This Form Gasket 2 is a replacement sealing gasket designed to restore a tight, reliable seal where the original foam/form gasket has become compressed or damaged. Replacing it helps reduce leaks and maintain normal appliance operation. What it does:

• Replaces a worn or damaged foam/form gasket to restore proper sealing
• Helps prevent water, air, or debris from passing where the original gasket seals
• Commonly used where a formed seal cushions or closes a gap in the appliance assembly
• Address symptoms such as visible gaps, leaks, rattling, or improper sealing along the joint

• One Form Gasket 2 as shown

• Install in clean, dry area; remove old gasket and clean mating surfaces before fitting the new gasket
• Fit gasket to the formed channel or mounting surface per the appliance's service instructions
• Wear gloves to protect hands from sharp edges and to avoid contaminating the gasket surface

This hardware kit provides the mounting fasteners needed to secure appliance panels and components, helping restore proper fit and reduce rattling or misalignment. Use it to replace missing or worn mounting pieces during repairs. What it does

• Supplies factory-style fasteners and small mounting pieces used to secure panels, trim, or brackets
• Helps stop loose panels, reduce vibration noise, and improve alignment of parts
• Useful when original screws or clips are missing, stripped, or damaged
• Works as a replacement kit for routine maintenance or part reinstallation

• Follow the appliance's service manual or OEM diagram for correct fastener locations
• Disconnect power and water before servicing the appliance
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads or crack panels
• Handle sharp sheet-metal edges carefully and wear eye protection

Is your air conditioner not cooling or freezing up? The evaporator assembly absorbs heat to cool your room. Moderate difficulty repair, 1-2 hours.

Fix an air conditioner that won't cool, turn on, or respond to controls with this main control board. Restores temperature control and normal operation.

Fix an air conditioner that won't turn on or has no power to controls with this transformer. Common repair for non-responsive units. Takes 30-45 minutes.

Air conditioner won't start or hums but doesn't cool? This run capacitor stores electrical energy to start the compressor. DIY-friendly repair.

This electrical box support is a replacement bracket that secures the appliance's control/electrical box to the chassis, helping keep wiring and components stable for reliable operation and reduced vibration. What it does:

• Holds the control/electrical box in place to prevent movement and strain on wires and connectors
• Helps maintain proper alignment of controls and access panels
• Reduces vibration-related noise and intermittent electrical connections
• Useful when the original support is bent, cracked, or missing

• One electrical box support bracket

• Disconnect power to the appliance before beginning any repair
• Access may require removing rear or inner panels; basic hand tools typically needed
• Inspect mounting screws and nearby wiring; replace any damaged fasteners or wire harness clips
• Do not modify the bracket; install exactly as the OEM design to ensure safe fit and function

The Display Circuit Board is an OEM part for GE window air conditioners. Mounted at the front of the unit, it operates the LED lighting and screen for indicating settings.  

Causes of a faulty display board can include damage from moisture intrusion over time compromising sensitive onboard electronics. Condensation and dust particles get trapped inside sealed front panels adding stress.

Symptoms of a bad display board involve:

• Random shutoffs or failure to latch on temperature settings
• Inability to maintain cooling or fans at set levels 
• Refusal to power on without control response  
• Noisy buzzing or humming coming from electrical areas

This genuine GE replacement preserves convenient readout and control options. Compatible with some Frigidaire, Midea, and EdgeStar units, proper functioning maximizes user-friendly operation. Compatibility with wireless remote devices is also maintained for distance control of indoor comfort.

Replacement power cord for room air conditioners. Restores electrical connection when original cord is damaged, frayed, cracked, or no longer reliable.

Replacement remote control for room air conditioners. Restores wireless operation when original remote is lost, broken, or buttons no longer respond.