Ivan H New Florence , PA January 27, 2015 The oven temperature wasn't regulating Order the one part (sensor) Read More... 107 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Dana D Fulshear , TX November 20, 2017 Appliance: Samsung Electric Range FCQ321HTUX/XAA-0000 Samsung electric range model FCG321THUX error code E27 Just using a Phillips Screw Driver ...Parts Arrived 4 days after online ordering . it took me longer to Vacuum behind the Range than it took me to fix it.. lol .. Un plug the Range Remove 5 Screws holding the back panel on, My Model Range the Sensor Thermistor was in the Top Middle .. and the Screw was (Inside) the range not on the back. (USE A GOOD PHILLIPS Screwdriver ) as to not strip out the head, Carefully unplug the Wire harness, Remove screw, pull wire harness from inside oven area and rethread NEW wire harness into open area,clip harness together (To help hold it in place ) re screw thermo bracket to Oven wall, and your done... I Replaced the Therm just to be safe it sits on the back of the Range held on with metal tabs, Carefully bend tabs out to remove and unplug sensor and re-plug new sensor, Bend tabs back and DONE! install 5 screws move range back to location and your done... here's a lil tip .. If you have tile floors or Linoleum.. Spray Windex in front of the Range Legs and it will slide out minimum Effort Ladies, If you can work a screwdriver no need for you to wait on the husband to get Around to it.... added my wife LOL ( but I still Repaired in Less than 20 minuets.Most importantly four days before Thanksgiving. Read More... 27 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Ruddy O Hoschton , GA January 14, 2017 Appliance: Samsung Electric Range NE595N0PBSR/AA-0001 Oven temperature control and convection bake or roast not working Bought Motor assembly and new Thermistor. Went to U tube to review videos. Everything worked as I saw except the new convection motor came with different tabs to connect power than original part. I cut one of the wires and repaired the end with another fitting. Plugged it in and worked just fine. It would be nice if Appliance Parts Pros sent along a sheet with the motor advising what to do if the motor block had different tabs. Just saying..... Read More... 11 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Pliers, Screwdrivers, Socket Set
Rita H Vienna , VA November 05, 2017 3 1/2 y o samsung electric range, fan of the convection stopped working and temperature was inaccurate Replaced Motor convection and the Sensor Thermistor. Did not need to replace the Fan. I had a handyman replace the parts. It took him about 30 min altogether. It was cheaper than having Samsung Service. The parts were also cheaper than the ones provided by Samsung Service. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Alyssa B Tulsa , OK September 25, 2016 Appliance: Samsung Gas Range NX58F5500SS/AA-0000 E 27 & e oa error code Replaced the oven temperature sensor as well as the mother board of the oven. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers