How to Troubleshoot & Replace Samsung AP4343210 / DG32-00002B Range Oven Temperature Sensor

Just using a Phillips Screw Driver ...Parts Arrived 4 days after online ordering . it took me longer to Vacuum behind the Range than it took me to fix it.. lol .. Un plug the Range Remove 5 Screws holding the back panel on, My Model Range the Sensor Thermistor was in the Top Middle .. and the Screw was (Inside) the range not on the back. (USE A GOOD PHILLIPS Screwdriver ) as to not strip out the head, Carefully unplug the Wire harness, Remove screw, pull wire harness from inside oven area and rethread NEW wire harness into open area,clip harness together (To help hold it in place ) re screw thermo bracket to Oven wall, and your done... I Replaced the Therm just to be safe it sits on the back of the Range held on with metal tabs, Carefully bend tabs out to remove and unplug sensor and re-plug new sensor, Bend tabs back and DONE! install 5 screws move range back to location and your done... here's a lil tip .. If you have tile floors or Linoleum.. Spray Windex in front of the Range Legs and it will slide out minimum Effort Ladies, If you can work a screwdriver no need for you to wait on the husband to get Around to it.... added my wife LOL ( but I still Repaired in Less than 20 minuets.Most importantly four days before Thanksgiving. 

Bought Motor assembly and new Thermistor. Went to U tube to review videos. Everything worked as I saw except the new convection motor came with different tabs to connect power than original part. I cut one of the wires and repaired the end with another fitting. Plugged it in and worked just fine. It would be nice if Appliance Parts Pros sent along a sheet with the motor advising what to do if the motor block had different tabs. Just saying..... 

Replaced Motor convection and the Sensor Thermistor. Did not need to replace the Fan. I had a handyman replace the parts. It took him about 30 min altogether. It was cheaper than having Samsung Service. The parts were also cheaper than the ones provided by Samsung Service. 

Replaced the oven temperature sensor as well as the mother board of the oven. 

We ordered several parts from appliance parts pros and we were able to fix the oven. Anyone who owns a samsung appliance knows that ONLY samsung can order repairs to be done. NONE of our local repir shops would touch our stove. We would have had to have a service call via samsung (out of warranty so expensive) and the wait time is 4-6 weeks. We were able to diagnose the issue with the help of the online chat, ordered the parts, installed them myself, and we know have a working oven! 

Samsung Part was discontinued, ended up using some advice I read on your site and it worked like a tip. The 45 broiler bracket and thermocouple fit just fine and fixed the problem. 45 broiler will replace the discontinued 55. 

I followed the instructions from the video. I am a female medical office professional and was quite proud that I fixed a home appliance myself. My husband stated that I can now be the repair person at home. The process was quite simple , and most cost effective. I estimate I saved about $250 from a appliance repair tech coming to my home and overcharging me. The female representative I spoke with on the phone who took my order was incredible and very knowlegable. Between the both of us, we narrowed it down to part for the fix and it worked beautifully. I am thrilled. It required one tool, a philps screw driver. The entire process took about 10 minutes and the oven was up and running at full capacity! 

Not really fixed. I replaced the part in 20 min. It work great the first day. The second day it was back to the original problem. The third day it worked but its very slow at reaching the set temperature. 

Replaced the heat sensor. Thanks for the part fast shipping and cheapest price online. 

Replaced temp sensor and bake element. super easy!