Dishwasher Float Switch Float Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11545764
Fix dishwasher overflow or no-fill issues with a float switch replacement. Detects water levels and prevents floods. Simple repair for most DIYers.
Do-It-Yourself Stories from Customers like You
Clip on float switch cracked Nick B. • Jefferson City , MO • May 26, 2025
Replaced switch
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Lg part
By: Lg
Part Number: 4769DD2001A
Dishwasher not filling with water or leaking? The float assembly monitors water levels and prevents overfills. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Main wash motor froze and then burned out the controller too i had to buy a new motor so the completely assembled sump with all motors and valves and heating element was a real steal for +$10 Mike K. • Fort Collins , CO • May 01, 2015
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not...
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532207
Fix water leaking from your dishwasher or overfilling issues. This float assembly monitors water levels to prevent overflow and flooding damage.
More
$4.41
- Compare At:
-
$4.90
- You Save:
-
$0.49
Genuine Ge part
By: Ge
Part Number: WD21X802
Fix a dishwasher that won't drain or drains constantly during wash cycles. This drain solenoid valve controls water drainage timing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
I had the smell of burning insulation followed by failure to drain the dishwasher seemed to cycle ok Dan G. • El Dorado , CA • November 17, 2014
Took the washer out, turned it over and found the solenoid that worked the drain valve to be melted, and the shaft that the solenoid activates was heavily corroded. I found the right parts on your website after reading the notes left by other customers, then watched the video. The repairs were fairly simple and successful. This was a GE profile dishwasher.
Read more
More
$74.95
- Compare At:
-
$89.94
- You Save:
-
$14.99
Genuine Samsung part
By: Samsung
Part Number: DC62-30314L
Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into your dishwasher. Moderate DIY repair for most users.
More
$130.69
- Compare At:
-
$155.52
- You Save:
-
$24.83
Genuine Ge part
By: Ge
Part Number: WD35X10386
Fix spray arms that won't spin or rotate unevenly with this dishwasher diverter assembly. Controls water routing between upper and lower arms. 1-hour DIY.
Do-It-Yourself Stories from Customers like You
The diverter possibly sump gasket. Richard M. • Saylorsburg , PA • March 06, 2021
Purchased your parts watched the awesome video on your site.
Repair was complete within an hour the dishwasher is running
as I am typing this.
Thank you so much for the service you offer.
Regards,
Rich
Read more
More
$89.95
- Compare At:
-
$107.94
- You Save:
-
$17.99
Genuine Samsung part
By: Samsung
Part Number: DD82-01373A
The Dishwasher Brake Case Assembly is a high-quality replacement part designed to ensure your Samsung dishwasher operates smoothly. This genuine OEM part guarantees compatibility and a precise fit, maintaining the integrity of your appliance. The brake case assembly plays a crucial role in controlling the doorGÇÖs movement, preventing sudden closures and potential damage. By replacing a worn or faulty brake case, you can restore your dishwasherGÇÖs functionality and extend its lifespan. Installing this assembly is straightforward, allowing you to quickly get your dishwasher back to optimal performance. Crafted with durable materials, the Dishwasher Brake Case Assembly offers reliable performance and long-lasting results. Trust in this genuine OEM part to provide the functionality and safety your kitchen appliance needs, enhancing your overall user experience and ensuring your dishwasher runs efficiently.
Do-It-Yourself Stories from Customers like You
Error code "over fill" (flashing 'smart auto' and 'heavy' lights) cycle doesn't start in time for water to reach over fill sensor Patrick H. • Conyers , GA • May 19, 2015
Here's what the problem was:
Started the 'Normal' cycle... I closed the door... it calls for water, water fills, ECS sensor doesn't kick it to the next segment of the cycle (wash), so the water over-fills and reaches the over-fill sensor.
So many other are replacing the plastic 'case-brake,' main board, and the ECS sensor. I, however, was able to get by with just the ECS sensor replacement, which is known to be a faulty design by Samsung, supposedly.
The idea is replace the (1) most common...
Read more
More
$197.95
- Compare At:
-
$233.58
- You Save:
-
$35.63
Genuine Whirlpool part
By: Whirlpool
Part Number: W11535094
Fix a dishwasher that won't fill with water or leaks during fill. This inlet valve controls water flow into your machine during wash and rinse cycles.
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Whirlpool part
By: Whirlpool
Part Number: W11082871
Fix a dishwasher not filling with water or filling too slowly. This inlet valve controls water flow into your dishwasher. DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Dishwasher not filling with water Ryan H. • Oak Creek , WI • March 17, 2017
Replaced the water inlet valve and float switch.
Read more
More
$84.95
- Compare At:
-
$101.09
- You Save:
-
$16.14
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408
Fixes dishwasher leaking, error code i20, or pump that won't stop running. Monitors water pressure to control wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Leaking dishwasher. Richard W. • Louisville , KY • April 20, 2020
Replace the pressure switch.
Read more
More
$65.74
- Compare At:
-
$78.89
- You Save:
-
$13.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002363
Fixes dishwasher overfilling or not filling properly. This float rises with water to signal when the tub is full. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Runs but will not fill with water Michael K. • Las Vegas , NV • January 25, 2020
I first installed the inlet pump with no results. I then ordered a Control Switch and Float and Nut. This fixed the problem. Everything comes out so clean. I also replaced the filter which allowed me to clean debris around old filter. It is also easier to replace all these parts with the dishwasher pulled out and tilted on its side. I had to pull mine out to unplug power to the dishwasher.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Samsung part
By: Samsung
Part Number: DD81-02243A
The Dishwasher Float Cover Assembly is essential for maintaining proper water levels in your dishwasher. This genuine OEM part ensures reliable performance by accurately regulating the float mechanism. Designed to fit a variety of Samsung dishwasher models, it guarantees a perfect fit and seamless integration with your appliance. The Float Cover Assembly helps prevent water overflows and ensures efficient washing cycles, enhancing the longevity of your dishwasher. Its durable construction withstands daily use, providing consistent operation over time. Easy to install, this part allows you to quickly restore your dishwasher's functionality without the need for professional assistance. By choosing this genuine OEM part, you benefit from the quality and reliability that Samsung is known for. Trust the Dishwasher Float Cover Assembly to provide consistent and dependable operation, ensuring your dishes come out clean every time.
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909
Dishwasher overflowing or not filling properly? The water level switch controls fill amount. DIY-friendly repair, typically 20 minutes with video guide.
Do-It-Yourself Stories from Customers like You
Washer would not fill with water Ty J. • Hillsboro , OR • July 08, 2018
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Bosch part
By: Bosch
Part Number: 00611312
The Sensor is an OEM replacement part for Bosch dishwashers. It detects soil levels through cycles, automatically adjusting water volumes and times for optimal cleaning. Precise sensing reduces overwashing.
Causes of a bad sensor involve general deterioration from continuous usage monitoring wash parameters thousands of times. Dirt or debris accumulation triggers false readings, decreasing efficiency.
Symptoms of a bad sensor include:
- Extended cycle times as improper inputs cause system delays
- Inconsistent wash results relying on default static cycle settings
- Error codes displayed indicating disrupted functionality
- Soiled dishes from inadequate adjustments meant for heavier loads
This OEM Bosch part maintains customized cleaning for Thermador versions as well.
Do-It-Yourself Stories from Customers like You
Dishwasher would not start. Jason M. • Florence , SC • November 30, 2020
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN.
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268895
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016
Removed bottom cover, located leak at float switch, removed and replaced float switch kit.
The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304483444
Fix a dishwasher that won't drain or makes loud buzzing/grinding noises. This drain pump assembly restores proper water removal. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Failed drain pump Russell P. • Gold Canyon , AZ • October 07, 2016
I drained the dishwasher by hand, disconnected power, water, and drain under the sink. I removed the screws holding the dishwasher in place. I located the pump with the online owners manual and removed it leaving the power connected. I put the machine on the rinse cycle and then hit cancel, the pump is supposed to come on, it didn't, I tried it twice, each time it would start if I manually started it spinning. So I ordered a new drain pump and reversed the removal procedure. Everything worked...
Read more
More
$137.21
- Compare At:
-
$163.28
- You Save:
-
$26.07