Refrigerator Run/Range/Oven Surface Element Switch Parts

I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the... Read more

After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more

Replaced door switch - it took less than 5 minutes - works perfectly Read more

• Light not working
• Not dispensing water
• Ice maker not making ice

I watched the repair video and I replaced the switch. I ordered the switch on Friday and the part came the next day. Amazing. Read more

• Not dispensing water

I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the... Read more

I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more

• Doesn't shut off
• Won't start
• Will not tumble

The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum. The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This... Read more

Ordered a new evaporator fan, heater coil and fresh food fan. Troubleshooting on youtube, ordered the parts watched the video on how to remove old parts and then how to replace them. Called 3 different repair companies, seems no one will work on this GE French door fridge. I am sure someone with experience could change everything quicker! However, my daughter and I got the job done and the fridge is working great again! The videos on the parts ordering were the biggest help, straightforward and... Read more

• Freezer too cold
• Fridge too cold
• Too warm
• Freezer section too warm

Yes, a 49-yr old woman fixed this fridge all by herself! AppliancePartsPros was very helpful in the diagnosis of the problem, which I determined to likely be the result of defrost failure. There was a large amount of ice and frost coating the back of the freezer despite the inside temp being 42 degrees. My husband thought I was crazy to think it was a problem with ice when the temperature was warm, but I told him to trust me and I would attempt the repair. He just wanted to throw the old one... Read more

I chose to replace both parts so I wouldn't have to go back into the freezer. I used only a screw driver, pliers and the gas lighter to heat the wire connector sleeves. I watched the available do it yourself videos and was done in less than 30 minutes. It has worked perfectly since. No more Ice build up in the freezer. I had no trouble finding the exact parts I needed on your website. Read more

After disconnecting power to the fridge, I first removed the ice maker/water dispenser/fridge control faceplate. This easily popped out using a flat head screw driver. Then disconnected the 3 wire harness connections to the control board. I next removed the plastic dispenser housing shield. There's only 4 screws that hold this on. Finally, I removed the Micro-switch, disconnected the two wire connectors and installed the replacement switch and reinstalled everything. The repair took only... Read more

• Light not working

We had delayed repairing the problem because we received a price of more than $ 100 from a local appliance repairman. However, after viewing the view on the ApplianceParts Pro website, I saw what an easy repair it would be. After receiving the part from you, I had my son do the repair because I felt it would a good father - son bonding time. It was so easy and he was proud of his ability. Thanks for your excellent repair video and the excellent price. It costs less than $ 22 instead of more... Read more

I pried off the old one and plugged in the new one Read more

• Frost buildup

Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more

Got the six year old refrigerator from my daughter because of it freezing up but was in good ( Stainless Steel) shape to replace our 21 year old Kitchen Aid. The thermistor had been replaced as a cheap first step but didn't correct the problem as it totally froze over within five days. I decided to tear down again and check the defrost heater element which was found to have an open circuit and hence the replacement part. Thanks to AAP, I ordered the part at the weekend, was shipped on Monday... Read more

REPLACED THE LIGHT/LAMP SWITCH. Read more