Room Air Conditioner Insert Control Panel Parts

This Drive PWB is the replacement electronic board that controls the appliance's drive functions, restoring reliable motor and transmission commands for normal operation. What it does

• Controls drive motor speed and direction and sends/receives signals to the main control
• Can resolve symptoms such as no spin/agitate, erratic drive behavior, or unresponsive drive controls
• Re-establishes communication between drive assembly and console when board failure is the cause
• Works as the direct replacement board for the drive electronics in compatible units

• Disconnect power to the appliance before service to avoid shock—verify unit is de-energized
• Handle the board by its edges and avoid touching components; observe basic ESD precautions
• Reconnect all connectors in their original positions and secure mounting hardware

Replacement compressor cushion for air conditioners. Absorbs vibrations and reduces operational noise. Install when original is cracked or worn out.

Replaces the main control board touch pad on your air conditioner. Install this component when the original is cracked, unresponsive, or damaged.

This control base assembly is the molded housing that holds the appliance's user-interface components. Replacing a damaged base restores proper alignment and secure mounting of the control board, switches, and display for dependable operation.

• Provides structural support and mounting points for the control board, switches, and display in the control area
• Keeps buttons/knobs aligned for smooth, consistent actuation
• Helps protect and organize wiring within the control panel
• Typical symptoms: cracked or broken housing, loose or sunken controls, buttons sticking or not lining up, rattling/vibration from the control area

• Disconnect power to the appliance before servicing
• Remove the control panel/console to access the base; retain screws and clips for reuse
• Transfer existing control components and wiring to the new base in the same positions
• Avoid overtightening screws into plastic; verify button travel and alignment before reassembly

This replacement plug/cap seals an unused opening or access hole on compatible Frigidaire appliances to stop drafts and moisture while keeping internal components secure. It restores a finished appearance and prevents debris from entering. What it does:

• Seals access holes or service openings to help prevent water or air intrusion
• Secures wiring or tube routing by closing unused ports
• Helps keep out dust, pests and debris from internal compartments
• Common symptoms indicating replacement: missing or loose plug, visible gap, or water/draft at the opening

• One replacement plug/cap, as shown

• Disconnect power to the appliance before beginning any work
• Typically installs as a press-fit or snap-in component; no special tools required
• Inspect surrounding area for damage before installing; do not force into place

Rubber cushion that mounts under the compressor to isolate vibration and prevent metal contact. Replace if worn, cracked, missing, or fallen off.

This is an electronic control board (PC board) for a room air conditioner. It manages the unit's charging and operational functions, communicating signals from the touch pad to control cooling, fan speed, and temperature settings. Replace this board if your air conditioner is unresponsive to controls, displays erratic behavior, or fails to turn on.

Replace your air conditioner's touch pad control panel if buttons are cracked, worn, or unresponsive. Installs on the front interface for user controls.

This electronic PC board controls key appliance functions and user interface signals so the unit responds correctly to button presses and cycles. Replacing a failed board restores electronic control without replacing other modules. What it does:

• Receives input from the control panel and sends commands to motors, valves, heaters, and lights
• Manages timing and sequence for cycles and electronic features
• Can cause symptoms like an unresponsive control panel, blank or erratic display, or failure to start cycles
• Helps resolve intermittent operation or loss of specific electronic functions when board failure is the confirmed cause

• One electronic PC board

• Disconnect power (unplug or trip circuit breaker) before starting work
• Handle the board by edges and avoid static discharge—use an ESD strap if available
• Verify connector orientation and seating; ensure all harnesses are fully engaged before testing
• Test appliance operation after installation; if other symptoms persist, further diagnostics may be required

This is the main electronic control board for a room air conditioner, managing compressor operation, fan speeds, temperature regulation, and user inputs. It mounts behind the control panel and connects to the display, sensors, and motor components. Replace this board if the air conditioner does not turn on, fails to respond to controls, displays error codes, or does not maintain the set temperature.

This is the main electronic control board (PC board) that manages the core functions of a portable or window air conditioner, including compressor cycling, fan speed, and temperature regulation. It processes input from the control panel and sensors to maintain the desired settings. Replace this board if the unit does not turn on, displays error codes, fails to cool, or if buttons and controls are unresponsive despite receiving power.

This printed circuit board serves as the main electronic control for the air conditioner, processing input from the touch pad and managing functions like temperature, fan speed, and mode selection. It mounts behind the front control panel and connects to the unit's sensors and components. Replace this board if the display is unresponsive, buttons do not register, or the unit behaves erratically.

This is a printed circuit (PC) board that manages the electronic functions of a room air conditioner, including temperature regulation, fan speed, and mode selection. It receives input from the control panel and directs the compressor, fan motor, and other components accordingly. Replace this board if the air conditioner is unresponsive to controls, displays error codes, or fails to turn on despite receiving power.

This is the main electronic control board assembly for a room air conditioner, incorporating the touch pad control panel. It processes user inputs and regulates compressor, fan, and temperature functions. Replace this board if the unit fails to respond to button presses, displays error codes, or does not turn on or cycle properly.

Replace your cracked, unresponsive, or worn air conditioner touch pad control panel. Installs on the front display area to restore button functionality.

This is a printed circuit board that controls the display panel and user interface on a room air conditioner. It processes input from the touch pad controls and communicates with the main control board to regulate temperature settings and fan speed. Replace this board if the display is blank, flickering, showing incorrect readings, or if the touch controls are unresponsive.