Washer Float Switch Float Parts
Genuine Speed Queen part
By: Speed Queen
Part Number: 203843
Fix washer not filling, low water errors, or intermittent fill issues. This pressure sensor monitors water levels and signals the control board. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Intermittent issues with the cold water fill Urrvano G. • Rochester , MN • January 03, 2026
I replaced both the solenoid (part of the inlet valve kit) and the pressure sensor. Online research suggested my intermittent issue with the cold water fill being just a trickle and then causing an error was likely due to one or both of those two parts failing. Since they are in the same spot it was suggested (and I agree) that it is best to replace both at the same time. The hardest and most frustrating part was getting the bracket back on with the two bottom tabs being in place. It took...
Read more
More
$18.38
- Compare At:
-
$19.62
- You Save:
-
$1.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001908
Fixes washer that won't agitate, spin, or start. If your washer stops mid-cycle or won't run with lid closed, this lid switch kit restores operation.
This part fixes the following symptoms
-
Will not fill with water
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Washer would not turn on Anthony W. • Washington , DC • October 23, 2014
No water, no electricity, nothing happened when I pulled the on knob. I replaced the lid switch. The switch arrived at my house super fast - ordered on Friday and was there on Saturday. The whole replacement process took no time at all.
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10292584
Washer won't fill with water or overfills? This water level pressure switch monitors tub water levels. Easy DIY repair, typically takes 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Maytag centennial(mvwc6esww0) washer agitates fills at same time&refills after last spin cycle Regina R. • Inverness , FL • September 14, 2016
I viewed various sites online. On www.shopyourway.com I found some information on how to determine if it was a faulty load sense switch, or faulty timer. On youtube I entered; change load sense switch. I viewed theapplianceman video.I performed the test per shopyourway.com It was a faiIed load sense switch.Prior to the test I checked to make sure my drain tube was not clogged. I ignored applianceman info on cutting clear plastic tube. I did make sure it was not clogged. I ignored his testing...
Read more
More
$157.48
- Compare At:
-
$187.40
- You Save:
-
$29.92
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10076
Fix washer overflow issues with this water level pressure switch. Monitors tub water height and signals controls to stop filling. Common DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would fill up and over flow John H. • Sarver , PA • April 20, 2014
Ordered level switch
Read more
More
$43.69
- Compare At:
-
$95.75
- You Save:
-
$52.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285935
Washer won't agitate, spin, or drain but fills with water? A faulty lid switch is the likely cause. This safety switch detects lid position. 20-min DIY fix.
Do-It-Yourself Stories from Customers like You
The lid switch broke Craig K. • Toledo , OH • June 26, 2020
Had to remove the lid from the washer, disconnect the wiring. Removed old switch and put in new. The total repair took about 20 minutes. Very easy. Thanks.
Read more
More
$61.52
- Compare At:
-
$73.21
- You Save:
-
$11.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002044
Washer won't spin or stops mid-cycle? This tub displacement switch senses water level and balance to restore proper spin operation. DIY-friendly fix.
Do-It-Yourself Stories from Customers like You
Neptune mah4000 had a no spin but did pump water out but not all of it Guillermo S. • Chicago , IL • March 06, 2017
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart.
Read more
More
$63.65
- Compare At:
-
$75.11
- You Save:
-
$11.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134421000
Fix washer overfilling or incorrect water levels with a new pressure switch. Solves fill problems across load sizes. Most installs in 5-10 minutes.
Do-It-Yourself Stories from Customers like You
The water level selector switch. Not adding the correct amount of water to the tub. Terence Sullivan S. • Lagrange , GA • July 23, 2022
I replaced the Water Level Switch. I ordered it from AppliancePartsPros.com. Installed the switch in (5)minutes. I was able to load my washer to the right water level that I selected.
Read more
More
$139.95
- Compare At:
-
$166.54
- You Save:
-
$26.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339019
If your washer overfills or underfills, the water level pressure switch may have failed. This switch senses water height and signals the control.
More
$157.95
- Compare At:
-
$187.96
- You Save:
-
$30.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10180780
Fix a washer that won't advance cycles or starts agitating immediately with a new cycle switch. Located in the control panel for straightforward access.
More
$104.10
- Compare At:
-
$114.51
- You Save:
-
$10.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10351806
Washer won't fill properly or overfills? This water level pressure switch senses water height and signals the control to stop filling at the right level.
More
$154.51
- Compare At:
-
$183.87
- You Save:
-
$29.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00600925
Fix a washer that won't stop filling or overfills during cycles. This water level pressure switch senses and regulates fill levels to restore proper operation.
Do-It-Yourself Stories from Customers like You
Water overfilling at rinse cycle would continue even after turning cycle switch off Isa S. • Pittsburg , CA • December 15, 2025
Replaced both water intake valves, most common failure, also replaced water level regular to be safe, it is 20+ years old. Great washer worth fixing, previous and first repair 3 years back was drain pump, belt still looked great
Read more
More
$108.40
- Compare At:
-
$129.00
- You Save:
-
$20.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10330142
Fix a stuck or non-responsive control panel button on your washer. This pushbutton switch restores reliable selection and command inputs to the control board.
More
$132.49
- Compare At:
-
$156.88
- You Save:
-
$24.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339319
If your washer overfills, underfills, or won't advance cycles, the water level pressure switch likely failed. This part senses drum water height.
More
$160.51
- Compare At:
-
$189.40
- You Save:
-
$28.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00427041
Fix washer overfilling or underfilling issues with a water level pressure switch replacement. Controls water amount during wash cycles. Moderate DIY repair.
More
$47.95
- Compare At:
-
$48.63
- You Save:
-
$0.68
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399000
Washer won't start or stops mid-cycle? A faulty lid switch is often the cause. This safety switch tells your washer the lid is closed. 15-30 minute fix.
More
$15.23
- Compare At:
-
$17.97
- You Save:
-
$2.74
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134401700
Fix a washer that won't start or spin with this lid switch replacement. Common fix for washers that stop mid-cycle. Standard DIY repair in 30 minutes.
More
$33.70
- Compare At:
-
$40.10
- You Save:
-
$6.40
Out Of Stock
Usually ships within 4 - 14 days