Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Ice Dispenser Lever is an OEM component specifically designed for Whirlpool side-by-side refrigerators with built-in ice dispensers. Located inside the ice and water compartment, the lever is responsible for releasing cubed or crushed ice when engaged. Symptoms of a bad ice dispenser lever include:
Causes of a bad lever can be worn gears or connector linkages inside the ice dispensing mechanism from repeated use over time. This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore fridge models.
I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more
The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This part provides the necessary power boost to start the compressor.
Causes of a bad start relay can include electrical issues, wear and tear from regular use, or damage from power surges or overheating.
Symptoms of a bad compressor start relay include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Googled the symptoms and realized it was probably the Start Relay. To check, I unplugged the refrigerator, took off the back panel, and pulled the old start relay off. I shook it and it rattled, like something was broken inside. That was the sign that it did indeed need to be replaced. Looked up the part on www.appliancepartpros.com and found it. Ordered it and it was here two days later. Replaced the old one and the refrigerator started cooling again. Very easy fix that saved me calling a... Read more
The Light Lens is an OEM part for Whirlpool refrigerators. This part covers and protects the refrigerator light bulb, ensuring the light is evenly diffused throughout the refrigerator interior.
Causes of a bad light lens can include cracks or breaks from impact or mishandling, discoloration due to prolonged exposure to the light bulb's heat, and general wear and tear over time.
Symptoms of a bad light lens include:
I ordered a new lens. I submitted the model and serial number after easily finding the website and from fine illustrations I soon found the number I needed to order the proper part. It arrived soon, was well packaged and modestly priced. Read more
The Roller Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the rollers that support and allow the refrigerator to be moved easily for cleaning or maintenance. Proper functioning rollers ensure smooth movement and stability of the appliance.
Causes of a bad roller assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or exposure to moisture leading to rust or corrosion.
Symptoms of a bad roller assembly include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took the old assembly off and put the new on, just bolts on, very easy. Read more
This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.
When I first found out that the evaporator fan doesn't work, I went to a local home appliances store to buy one , cost me $40 , real easy to replace it and it solves the main problem , but this evaporator motor was making some loud noise every now and then , especially when we open the door too often. Then I ordered another one from Repair Clinic , this one is even worst , making a loud hum noise constantly, I had to return it. My wife really wants to buy another refrigerator but I don't... Read more
Secures refrigerator shelves to the liner wall. Replace this stud if shelves sag, sit unevenly, or won't stay in place due to broken or missing support.
White
Great video Easy repair Read more
Color: clear. It measures about 18 inches wide by 4 inches high.
Replaced the lens. Read more
White plastic hinge cover that snaps onto the top of your refrigerator door hinge. Replace if cracked, broken, or missing for a clean finished look.
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this... Read more
Compression nut for 5/16" plastic water line.
Chrome. No longer made in black.
The door stop, on the bottom, was broken (fatigued metal over the years) and needed to be replaced. Read more
White. For almond order WP1129262.
I switched them Read more
Our refrigerator is over 15 years old and has been working great with only minor complaints and repairs. We noticed that our water level has been discolored from minor dripping. Our hard water discolors everything. We decided to replace this lever and. The ice dispense lever was also replaced since we wanted both to match and I had to open that area anyway. Watching the online video showed us how to replace both. The hardest part was removed the outer cover. We were afraid of breaking... Read more