106890-02 Parts

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

The Ice Maker Scoop is an OEM component specifically designed for Whirlpool ice machines. As an included accessory, it provides a sanitary and convenient way for users to fetch ice from the storage bin.

The scoop is strategically designed with an ergonomic handle and wide opening bowl shape. This facilitates easy scooping and transport of ice cubes without spillage or crumbling. Its food-safe materials maintain hygienic conditions in the storage area. 

Symptoms of a faulty scoop include:

• Cracks or breaks that compromise the scooping surface 
• Leaks or spills of ice when trying to scoop
• Sharp edges that risk cuts or scratches
• Warping or loosening of the handle attachment over time

This OEM Whirlpool scoop is also compatible with some Scotsman and Manitowoc ice machines. Replace yours today to restore safe and hygienic ice retrieval from the storage bin.
 

This screw grommet anchors a screw in thin appliance panels so trim, covers, or consoles stay tight. It provides a snug, vibration-damping fit where a standard screw could loosen or strip over time.

• Creates a captive insert so a screw can securely fasten to sheet metal or plastic panels
• Replaces a worn, cracked, or missing grommet to restore proper screw retention
• Helps reduce panel rattles and movement from vibration
• Typical signs of failure: screw won't tighten, panel or trim feels loose, grommet falls out

• Disconnect power and shut off gas/water as applicable before servicing
• Remove the screw and lift out the old grommet; clear debris from the opening
• Press the new grommet straight into the hole until fully seated and flush
• Reinstall the screw and tighten gently to avoid deforming the grommet

This compressor start device engages the compressor at startup and guards it from overheating. Replacing a weak or failed device can restore reliable compressor starts and stabilize cooling performance. What it does:

• Supplies the initial start current to the compressor, then transitions to run via a PTC relay
• Protects the compressor by opening the circuit if current draw or temperature is excessive
• Helps with: compressor won't start, repeated clicking from the rear, warm/not cooling temperatures, or a rattling/burnt start device

• One start device assembly

• Disconnect power before servicing; work in a well-ventilated area
• Access the device at the compressor, note wire locations/orientation before removal
• Safely discharge any start/run capacitor per manufacturer procedure
• Push the new device fully onto the compressor terminals, secure any cover, then restore power and verify operation

Electronic control board is the appliance's main control module that manages oven cycles, temperature regulation, display, and user inputs. Replacing a faulty board restores control functions and helps the oven run as intended. What it does:

• Receives commands from the touchpad/controls and runs the oven's heating cycles and timers.
• Regulates bake/broil elements and temperature feedback to maintain selected settings.
• Powers and drives the LED/LCD display and clock functions.
• Common symptoms of a failing board: unresponsive controls, incorrect temperature, error codes or blank/garbled display.

• Disconnect power at the breaker before servicing to avoid electrical shock.
• Handle the board by its edges; avoid touching components and use ESD precautions if available.
• Verify the appliance model and part number before ordering or installing.
• If wiring or connectors are damaged, replace or repair them before powering the appliance.

The Reservoir Drain Tube is an OEM part for Whirlpool freestanding icemakers. It is responsible for draining melted water from the reservoir during the harvest cycle. This tube removes water to allow for new ice formation. 

Causes of a bad reservoir drain tube can include mineral buildup or blockages within the tube inhibiting proper drainage over time. Additional causes may be cracks, cracks, kinks, or other damage limiting water flow.

Symptoms of a bad reservoir drain tube include:

• Water not draining from the reservoir after harvest
• Excess water collecting in the reservoir 
• Slow or reduced ice production due to poor drainage
• Leaks or water spills around the drain tube area

This OEM Whirlpool replacement tube is also compatible with freestanding ice components manufactured by select Kenmore models. 

This electronic control board is the brain of the appliance, interpreting inputs and switching power to key components. Replacing a failed board can restore proper operation when the unit won't start, is unresponsive, throws recurring error codes, or behaves erratically.

• Coordinates cycle timing and settings based on user selections and sensor feedback
• Controls relays to motors, heaters, valves, fans, lights, and other loads
• Monitors inputs and stores/communicates diagnostic error codes
• Symptoms of a failing board include no power to controls, won't start, intermittent or erratic operation, or repeated error codes

• Disconnect power (and water/gas supply if applicable) before servicing
• Use ESD precautions; handle the board by the edges and avoid touching connectors or components
• Photograph/label all wiring; transfer any jumpers, DIP-switch positions, or ID labels from the original board if present
• After installation, ensure all connectors are fully seated and follow the unit's tech sheet for any required setup, programming, or service-mode steps

The Pump Harness is an OEM replacement part for Whirlpool icemakers. It connects the icemaker pump to the electrical system of your refrigerator, ensuring proper power supply. It provides a secure and reliable connection, allowing the pump to operate efficiently and deliver a consistent flow of water to the icemaker.

A bad wiring harness can occur due to various reasons, such as wear and tear, exposure to moisture or extreme temperatures, or accidental damage. If you notice symptoms such as the icemaker not producing ice, inconsistent or weak water flow, or a malfunctioning pump, it may be time to replace the wiring harness.

Causes of a bad icemaker pump wiring harness include:

• Wear and tear over time
• Exposure to moisture or extreme temperatures
• Accidental damage or improper handling

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Size: 8-18 x 1/2 inch.

This pump wire harness connects the pump to the appliance's power and control wiring, restoring reliable electrical connection for proper draining. Use it to replace damaged, corroded, or disconnected pump wiring that can stop pump operation. What it does:

• Routes power and control signals between the appliance control and the drain pump to enable pump operation.
• Replaces frayed, melted, or disconnected wires and mating connectors that can cause intermittent or no pump activity.
• Addresses common symptoms like a washer that won't drain, pump not running, or visible connector damage.
• Helps prevent arcing from loose connections by restoring secure electrical contacts.

• Disconnect power to the appliance before starting—always follow lockout/tagout safety practices.
• Access the pump per your model's service instructions; note wire routing and connector orientation before removal.
• Match and fully seat each connector; secure the harness away from moving parts and heat sources.

This replacement screw secures appliance panels, brackets, and components to the cabinet or chassis. The #8-15 x 1/2 in. size restores a snug, reliable hold when original hardware is missing, stripped, or corroded.

• Fastens panels, brackets, and trim to the appliance cabinet or chassis
• Helps reduce rattling, vibration, or looseness caused by missing/stripped hardware
• Restores proper alignment of parts that have shifted due to loose fasteners
• Size/spec: #8-15 thread, 1/2-inch length; use where this size is specified

• Disconnect power and shut off gas/water supplies before servicing
• Replace one screw at a time to maintain alignment of parts
• Start threads by hand to prevent cross-threading; do not overtighten
• Use a matching driver/bit type for the screw head used in your appliance

Replace a damaged or leaking tube with this quality replacement to restore a secure, routed connection inside your appliance. It helps direct flow between components so fluid reaches the right place and stays contained. What it does:

• Directs flow between fittings, valves, reservoirs, dispensers, or ice makers
• Maintains proper routing to prevent leaks and ensure normal operation
• Common failure modes include cracks, pinholes, kinks, and clogs
• Symptoms include leaks inside/under the unit, reduced or no flow to a connected component, or visible damage to the tube

• 1 tube

• Disconnect power and shut off the supply to the unit (water, if applicable) before servicing
• Note the original routing and connection points; take photos for reference
• Fully seat the tube in connectors/compression fittings; avoid sharp bends and contact with hot or moving parts
• Restore supply and check all connections for leaks

Size: 8 x 1-1/4 inch.

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

This transformer assembly provides the low-voltage power supply needed by the appliance's control system so the control board and user interface receive stable operating voltage. It restores proper control and display function when the transformer fails. What it does:

• Converts incoming line voltage to the low-voltage supply used by the control board and user interface.
• Helps the electronic control power up so cycle selection, lights and display operate correctly.
• Commonly replaced when the appliance shows no display, no response from controls, or intermittent control operation.
• Fits into the control module area and connects to the control board and power wiring.

• One transformer assembly as pictured and specified by the manufacturer.

• Disconnect all power to the appliance before servicing to avoid electrical shock.
• Handle wiring carefully; note or photograph connector locations before removal for correct reassembly.
• Replacement may require access to the control panel or console.
• Use only the exact part number replacement; do not attempt to modify or bypass the transformer.