Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

1102952100 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Ground Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614

Size: 10-24 x 3/8 inch.

Do-It-Yourself Stories from Customers like You Timer/control failed   Gilbert G. • Lansing , IL • July 09, 2018

Replaced timer control unit, first time doing this. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Cycle Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168262

This is a rotary cycle selector switch that mounts on the washer's control panel and allows you to choose different wash cycles such as normal, delicate, or extra rinse. It sends electrical signals to the control board to initiate the selected wash program. Replace this switch if the washer won't start, cycles cannot be selected, or the knob turns without engaging any cycle.

More
$77.23

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Selector Knob (Selection Assembly)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327523

A replacement selector knob selection assembly that restores a secure, easy-to-turn control for cycle or setting selection. Replaces a cracked, loose, or missing knob so you can confidently select functions again. What it does:

  • Replaces a worn, broken, or missing selector knob used to choose cycles or settings
  • Provides a secure grip and positive engagement with the control shaft
  • Helps stop slipping, wobbling, or a knob that won't turn properly
  • Restores normal control operation when the original knob is damaged
What's included:
  • One selector knob selection assembly
Install notes:
  • Disconnect power to the appliance before starting any repair
  • Most knobs pull straight off the control shaft; align the splines and press on until fully seated
  • If the knob resists, verify orientation—do not force to avoid shaft damage

More
$38.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer E-Ring Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10083190

Secures shafts and pulleys in your washer to prevent axial movement. Replace when worn or damaged to restore proper alignment. Confirm fit with model.

More
$7.71

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Hose-Fill
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212656RP

Kit contains two 10 feet inlet hoses.

More
$32.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Drain Hose U-Bend Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577378

Secures your washer's drain U-bend to prevent leaks and keep plumbing properly aligned. Simple push-fit installation takes just minutes to complete.

Do-It-Yourself Stories from Customers like You Needed to move washing machine discharge hose   Sally C. • Syracuse , NY • November 01, 2019

Added adapter and placed hose over laundry tub edge. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10165554

Replacement mounting screw for washer assembly. Secures internal components and panels. Order when original screw is stripped, missing, or damaged.

More
$12.13

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Wire Tie
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879

 

Do-It-Yourself Stories from Customers like You Kenmore washer made humming noise no agitation no more spin   Peter W. • Cupertino , CA • October 18, 2026

Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Wire Connector Block
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876590

Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.

More
$9.82

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Balance Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387240

The Balance Ring is an OEM part for Whirlpool washing machines. This part maintains the stability of the washer drum during the spin cycle. It contains liquid that helps balance the load, minimizing vibrations and noise while ensuring smooth operation.

Causes of a bad balance ring can include general wear and tear, exposure to heavy or unbalanced loads, or physical damage.

Symptoms of a bad balance ring include:

  • Excessive shaking or vibrating during the spin cycle
  • Loud banging noises
  • Washer moving or walking during operation
  • Uneven or off-balance loads

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine would shake so bad during the spin cycle that it would move about a foot   Charles L. • Arroyo Grande , CA • April 17, 2017

I first checked to make sure the washer was level. The washer is on a concrete floor. After watching lots of you tube videos I ordered all the parts that could be causing this problem. I ordered: Balance Ring, Suspension Pad Kit (3 rectangle plastic wear pads), Tub Suspension Pads(3 curved plastic wear pads), Suspension Spring, and a Spanner Wrench tool. After getting the washer apart it was obvious that the problem was the Tub Suspension Pads they had completely worn away so that only the... Read more

More
$81.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Outer Tub
Genuine Whirlpool part
By: Whirlpool
Part Number: 63849

Replace your washer's cracked or leaking outer tub. This housing holds the inner basket and prevents water from leaking into the machine's interior.

Do-It-Yourself Stories from Customers like You Outer tub cracked   Brian H. • North Tonawanda , NY • February 06, 2015

Replaced tub and center post seal Read more

More
$234.53

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Spin Tube Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64208

Spin tube assembly with drive spacer, bearing, and shaft seals. Replace if washer leaks from bottom or basket doesn't spin properly. Verify fit.

Do-It-Yourself Stories from Customers like You There was a center (tub) shaft seal leak in our Maytag washing machine.   John W. • Manvel , TX • June 02, 2021

It was fairly difficult, but I watched and followed the Appliance PartsPros video and was able to get it done using the parts I purchased from APP. The leak has stopped (but I'm still watching after 5 loads). Read more

More
$154.38

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Brake Release Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546461

Fixes grinding noise or basket won't spin issues by disengaging the brake during spin cycles. Restores smooth operation when cam wears out or breaks.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Timer Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400818

Fixes loose or wobbly timer controls by securing the timer assembly to its mounting bracket. Simple 5-minute repair restores proper cycle operation.

Do-It-Yourself Stories from Customers like You The cycles were off because the plastic on the part wore out.   Cheryl S. • Shawnee , KS • February 24, 2018

Purchased this Whirlpool dial and watched you-tube. Just popped off cover and put on new part. Second time replaced in 7 years. Works great! Read more

More
$7.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Spring Damper Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946792

Washer won't spin or vibrates excessively? This spring damper assembly cushions the drum during spin cycles, reducing vibration for smooth operation.

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google