11042822210 Parts

I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more

Replaced the switch. The lever and cam looked good, but they are inexpensive and the machine is 15 years old, so I replaced them as well. Read more

Ordered parts and replaced Read more

I simply unscrewed 4 screws holding the outer door to the inner window door. Access these 4 screws from the backside of the washer door. I pulled off the outer door from the inner door. Then I used the 4 screws to attach the new outer door to the inner door. Don't fully tighten the screws. (I used a star head screwdriver to accomplish this). I just used my hands to squeeze the outer door onto the inner door and it pops into place. then finally tighten the 4 screws. Read more

Replaced the plastic window Read more

I first replaced the drive motor which was no longer wanting to spin or rinse clothes. It was completely dead in my 10 year old washer. Once I replaced, it would run, but give the F06 code. I then replaced the CPU and runs like a new machine. Very easy repairs made in less than an hour by a stay at home mom with little ones wanting to help. If I can do it, anyone can do it. Great videos on this website help you to know what you will be doing prior to making the repair. Highly recommend... Read more

I researched the error code and found a video explaining how to fix the error. When I opened up my washer to begin an inspection I noticed my washer drum was disconnected from the struts which allowed the mother board to become dislodged. As a result there was a severed wire on the wire harness from the mother board to the motor. I ordered the part I needed after talking to Brent via online chat messaging. The part arrived the next day and it was easy to replace. My wife would have wanted to... Read more

My washing machine started banging when the spin cycle got close to full speed. After some research I determined that the mounting spindle had probably broken loose. With a manual I found online and a basket from AppliancePartsPros.com I disassembled everything down to just a shell, changed the basket and reassembled the washer. As I removed parts I put some screws and fasteners back in place so I wouldn't lose them or forget where they went. I also marked the drum during disassembly so I could... Read more

New inner drum and front and rear outer drum; although other parts worked, still replaced the bellow and clamp, new door latch, and cleaned the hoses. Washer works great. Just like brand new. Even though matching dryer works, I am going to clean it up and replace some parts on it also. Read more