Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a small hose that connects to the dispenser valve assembly inside the washing machine, directing water into the detergent or fabric softener dispenser. It ensures proper water flow to the dispenser during the wash cycle. Replace this hose if you notice leaking near the dispenser area, detergent not being flushed into the drum, or visible cracks and deterioration on the hose.
Changed upper plate & inlet hose real easy. Read more
This replacement lever is a small mechanical link that engages or releases its mating mechanism inside the appliance. Replacing a worn or broken lever restores crisp actuation and reliable operation of the related control or latch. What it does:
Talked with lady in order dept {robin?} who helped narrow down the part needed. Before I could order we were cut off. I ordered online, received the next day and repaired the washer. Great service. Read more
Fix a washer that won't spin, makes loud noise, or smells like burning. This drive belt pulley guides the belt and reduces friction. Moderate DIY repair.
Took it apart and saw that the the bearings were worn down completely.. The front outer tub was cracked and leaking. We ordered both pieces to the outer tub and a new pulley. My washer is running like new now.. A little advice.. Do not over load your washer.. Maytag is a great brand but overloading them because there great washers, will wear down the parts inside.. I have teenagers who overload my washers to save them time but wasting my money on parts.. Being a single mom it's hard but I did... Read more
Fix washer not powering on, F01/F11 error codes, or cycle failures with a new central control board. DIY repair in about 1 hour. Video guide included.
Well after Two different appointments and TWO different sears technicians looked at my machine, one indicated the CCU was bad, replaced it and still nothing, the second tech indicated the MCU was bad, he placed the MCU on a emergency order, 6 days later still no part and the Sears parts department said the part would be on back order for a couple more weeks, UNACCEPTABLE! (O_o). I located AppliancePartsPros.com, found the part I desperately needed, made the call and placed the order by noon.... Read more
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
Washer not dispensing soap or softener? A clogged or broken distribution nozzle prevents water flow to dispensers. Moderate DIY repair restores function.
I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more
Shipping bolt kit secures washer drum during transport. Includes 4 bolts to prevent drum damage when moving. Replace if lost or install before relocating.
I watched the youtube video from appliancepartspros that explained every step of how to install shipping bolts on a Whirlpool Duet front-load washer. The step that I would have missed without the video was removing the top cover from the washer in order to push the drum down enough for the shipping bolts to connect. I used a screw driver and a socket set to install the shipping bolts. Read more
Push-in nut secures counterweights, panels, and trim to washer tub studs. Replace when cracked, stripped, or missing to eliminate rattling.
Project is still on going but should be completed soon. still waiting for more warranty parts from whirlpool. not a simple repair for someone without strong mechanical ability. had to make a tool to remove and reinstall the tub clips. Read more
Retaining clip secures trim rings and panels inside your washer. Replace broken, bent, or missing clips to eliminate rattling and keep components seated.
This is a gray and white plastic control knob used on a dryer to select cycle settings or timer positions. It attaches to the control shaft on the front console panel. Replace this knob if it is cracked, broken, or if the D-shaped shaft opening is worn out and the knob spins freely without engaging the control.
Found the model name and number and ordered the correct dial / knob. Read more
Secures hoses to fittings on your washer to prevent leaks. Replace when clamps become loose or corroded. Verify fit with your model number.
After ordering the parts from you, I watched your video to the repair. Some problems with removing the control panel after the bellow went in with no concerns. Wife is happy with the results as the leaking problem was corrected Read more
This is a replacement mounting screw used to secure panels and internal components on compatible Whirlpool appliances. It restores proper fastening where the original screw is missing, stripped, or damaged for a safe, snug fit. What it does:
Secures washer panels and components to the cabinet. Replace if your mounting bracket is cracked, broken, or missing to restore proper alignment.
Secures hoses and seals to the washer tub for leak-free operation. Replace if damaged or weakened to prevent leaks. Confirm fit with your model.
Transport cover bracket that secures washer components during shipping and service. Replace if cracked, broken, or missing to prevent damage during moves.
Cleaned with alcohol then used 427 epoxy. Worked great 30 days so far no leaks. I still ordered the hose from you though. Read more
Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.