11049962603 Type 199 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10289554A
Stabilizes the drum during washer transport or moving. Includes four bolts that thread into rear bolt holes. Replace if original bolts are missing or lost.
Do-It-Yourself Stories from Customers like You
Needed to move it Deborah L. • Shelby , OH • April 20, 2015
The shipping bolts came in 2 days!!! Wow ! So we watched a video on how to install them and moved the washer without messing it up.. Thank you so much for fast and friendly service :-)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489503
This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.
- Fastens a hose to a barb or port to prevent leaks
- Helps keep hoses from slipping off due to vibration or pressure
- Restores proper sealing when a clamp is rusted, bent, or stripped
- Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
- Disconnect power and shut off the water supply before servicing
- Place a towel to catch residual water when removing hoses
- Position the clamp just behind the hose barb/bead and secure with the appropriate tool
- Restore water and power, then run a quick check for leaks at the connection
Do-It-Yourself Stories from Customers like You
Leaking bleach tube Mike C. • Willow Grove , PA • May 21, 2017
Replaced the tube and the clamp
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540282
This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does
- Fastens brackets, panels, and internal sub-assemblies in the appliance
- Helps maintain alignment to reduce vibration and rattling
- Replaces missing, rusted, or stripped screws that no longer hold
- Useful when a part won't mount securely or a screw backs out during use
What's included
Install notes
- Disconnect power; for gas appliances, also shut off the gas supply
- Compare to the original for length and thread style for the location
- Start threads by hand to avoid cross-threading; use the correct driver bit
- Do not overtighten; if the mounting hole or clip is worn, replace it
Do-It-Yourself Stories from Customers like You
My washer would not drain or start washing Marylue B. • Georgetown Township , MI • June 09, 2017
Ordered parts and hubby replaced and now it works. Thanks.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP696392
This metal clamp secures the exhaust hose connection to the dryer's outlet port, preventing air leaks and ensuring proper ventilation. Replace if you notice reduced airflow, lint buildup around the connection, the hose feels loose, or drying times have increased.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10121657
Fixes F02 drain error codes and slow draining. This small ball creates a seal in the tub-to-pump hose to control water flow. Simple DIY replacement.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285863
Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.
Do-It-Yourself Stories from Customers like You
Washer drain hose not long enough Ray P. • Frankfort , IL • February 07, 2016
I ordered the drain extension kit and the hose connector kit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10367632
Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.
Do-It-Yourself Stories from Customers like You
Everything was dead no power nothing worked there was power at the plug Duane M. • Batesville , AR • August 08, 2026
Popped the back control panel and checked where the power comes in. Had power. On the other side of that component there was no power. Found the problem. The hardest part was finding where they hid the model number. Up and under the back of the lid. Nice hiding place.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10161052
This plastic lever connects the dispenser mechanism in a washing machine, actuating the release of detergent or fabric softener at the correct point in the wash cycle. It transfers mechanical motion to open the dispenser at the proper time. Replace this lever if your washer is not dispensing detergent or fabric softener, or if the lever appears cracked or broken.
Do-It-Yourself Stories from Customers like You
Divertor arm jam in operation Charles C. • Huntley , IL • June 24, 2019
Talked with lady in order dept {robin?} who helped narrow down the part needed. Before I could order we were cut off. I ordered online, received the next day and repaired the washer. Great service.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10772607
Replacement outer tub for front-load washers. Houses the spin basket and seals water inside during wash cycles. Replace if cracked, damaged, or leaking.
Do-It-Yourself Stories from Customers like You
Horrible noise when in use expecially during spin cycle Gerald S. • Pecatonica , IL • September 20, 2014
Tore entire machine down to get to wash drum. Found it had a broken "spider" which is common with most front load machines. The drum is stainless steel but the spider is cast aluminum and it does not do well when exposed to laundry soap. It was pretty much disintegrated as a matter of fact. Anyway my machine is twelve years old and after some smooth talking, I was able to convince Whirlpool to send me a new wash drum at no cost. My warranty was one of the older ones and the drum had a...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10008880
Front counterweight that mounts to the washer's outer tub. Replace if cracked, broken, or missing to restore proper balance and reduce vibration during spin.
Do-It-Yourself Stories from Customers like You
The washer was leaking water from the bellow tub seal and a hose it also had a broken counter weight causing the tub to be out of balance Ronnie C. • Mcdonough , GA • April 18, 2015
It was a very easy repair, I was able to find and order the parts from appliancepartspro.com and use the video that explained step by step how to install the bellow tub seal.
The parts were shipped very quickly, I chose the next day shipping option and had my order in my home within 36 hours.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10085220
Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.
Do-It-Yourself Stories from Customers like You
The code was f20 which means not enough water flow. Bruno R. • Franklin Square , NY • April 10, 2021
Watched YouTube and ordered parts then replaced the parts and walla !!!! All was good.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181794
Detergent not dispensing into drum? This dispenser to tub hose carries detergent from the dispenser to the washer tub. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Musty smell Bjorn V. • Flower Mound , TX • April 29, 2018
I first watched the video showing me how to replace the tub seal. This probably covers everything you need to know about taking apart and putting together this unit. Completely disassembled the washer and power washed the back of the basket around the spider. There was light corrosion on the spider. Cleaned the tub and installed new gasket. Replaced tub to pump hose and discharge hose. Replaced the bellow tub seal and installed new spring. Replaced dispenser to tub hose. Cleaned...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183184
Fix a washer that stops mid-cycle or won't advance between wash stages. This actuator cam guides the lever arm movement for proper cycle transitions.
Do-It-Yourself Stories from Customers like You
One turn on the lever arm was pulling up and would not let the wash machine turn on John W L. • Geneva , FL • January 17, 2020
Replace the lever control arm and motor.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181660
This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:
- Fastens panels, brackets, or assemblies where specified in the model's parts diagram
- Replaces missing, rusted, or stripped hardware
- Helps eliminate looseness, rattling, or vibration
- Restores secure alignment of mounted components
What's included:
Install notes:
- Disconnect power and shut off water/gas before servicing.
- Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
- Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
- Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10283361
Washer won't spin or makes noise? This retaining nut secures pump and motor components. Common cause of leaks and wobbling. Basic tools needed.
Do-It-Yourself Stories from Customers like You
Worn pulley and broken belt. Guy F. • Glenbeulah , WI • August 29, 2020
Took back off of washer and replaced parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183183
This replacement lever is a small mechanical link that engages or releases its mating mechanism inside the appliance. Replacing a worn or broken lever restores crisp actuation and reliable operation of the related control or latch. What it does:
- Transfers motion from a button, handle, or cam to the connected mechanism (such as a latch, switch, or dispenser component)
- Ensures the mechanism moves fully and smoothly
- Wear or breakage can cause a loose feel, incomplete travel, or no response when pressing/pulling the control
- Visible cracks, missing tabs, binding, or intermittent operation are common signs it needs replacement
What's included:
Install notes:
- Disconnect power before servicing; also turn off water supply
- Access the assembly for your model per the service/parts diagram
- Note orientation of any springs or clips connected to the original lever; transfer them if present
- Reinstall with existing fasteners and test operation before reassembly
Do-It-Yourself Stories from Customers like You
Divertor arm jam in operation Charles C. • Huntley , IL • June 24, 2019
Talked with lady in order dept {robin?} who helped narrow down the part needed. Before I could order we were cut off. I ordered online, received the next day and repaired the washer. Great service.
Read more
More