Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

2015832 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Appliance Sheet Metal Pan Head Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP59002061

Sheet metal pan head screw secures panels, brackets, and components to appliance cabinets. Replace missing, stripped, or corroded screws to restore fit.

Do-It-Yourself Stories from Customers like You Burners would not light   Michael C. • Bastrop , LA • August 08, 2024

Replaced burners and cleaned Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Leveler (Adjustable Leveling Leg)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11117769

An adjustable leveler that supports and raises or lowers the appliance to help stabilize it on uneven floors. Restores proper alignment to reduce rocking, vibration, and door misalignment for improved performance and safety. What it does:

  • Provides height adjustment to level the cabinet and prevent rocking
  • Helps doors close and seal correctly by correcting leaning or unevenness
  • Reduces vibration and movement that can cause noise or wear
  • Simple turn-to-adjust design for fine tuning appliance position
What's included: One adjustable leveler Install notes:
  • Unplug the appliance (and shut off water supply for units with plumbing) before working nearby
  • Support the appliance when adjusting so it does not tip; use a helper or appliance dolly as needed
  • Turn the leveler by hand or with a wrench; adjust both front/back or left/right sides evenly and re-check with a level

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Hex Head Sheet Metal Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12990527

Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Oven High-Limit Safety Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P899-60

Oven won't heat or stops heating during cleaning cycle? The high-limit safety switch cuts power when temperatures exceed safe limits. Moderate DIY fix.

Do-It-Yourself Stories from Customers like You No heat from either broil or bake   Nicholas W. • Twin Peaks , CA • October 21, 2018

Started with checking temp control in the oven. Worked fine. Next was testing high limiter switch. Every place stated switch was on the back panel, found mine place under the right burner cartridge. Took some finagling to expose it. Bought a new one, two wires to disconnect along with two small screws to secure switch, slapped it in and I was in business. Oven that was out of commission for over two weeks (never buy a part from Sears, always deal with APP's!) was on the road again! Read more

More
$94.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Tractor Bell Washer
Genuine Mtd part
By: Mtd
Part Number: 736-0242

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

More
$4.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0599

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Terminal Block
Genuine Ge part
By: Ge
Part Number: WB2X1351

Range won't power on or heats intermittently? A faulty terminal block disrupts electrical connections. This double terminal block restores power flow.

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Light Cover Retainer
Genuine Ge part
By: Ge
Part Number: WB2X7694

 

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work   Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

More
$4.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Center Trim (Control Panel Bezel)
Genuine Ge part
By: Ge
Part Number: WB32X51

This center trim is the molded bezel that fits the front center of the cooktop/oven control area, restoring a finished look and protecting the control panel edges from heat and grime. What it does:

  • Covers and protects the exposed edge of the control panel for a clean appearance
  • Hides gaps, chips or discolored trim that make the console look worn
  • Helps prevent dirt and grease from getting behind the control assembly
  • Restores proper alignment and fit where the original trim is cracked or broken
What's included: One center trim piece. Install notes:
  • Disconnect power to the appliance before starting any repair.
  • Typically secures with clips or screws—retain hardware and note orientation when removing old trim.
  • Handle edges carefully; replacement may require gentle prying with a trim tool.
  • If mounting hardware or support brackets are damaged, replace them separately.

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1163283

Color: Stainless steel

Do-It-Yourself Stories from Customers like You The existing bake element was not working light bulb was also burned out.   Mike P. • Stone Mountain , GA • December 02, 2017

I simply removed and replaced the bake element and light bulb. The only difficulty I had was working around the open oven door. I relied on the Appliance Parts Pros videos for procedures on how to do this safely and correctly. I would not have attempted this repair without the videos. The only problem I had was the $5 screws ($10 for the two I purchased) were not the same type as the original scews and they did not "grip" the oven wall properly so I had to re-use the original screws which were... Read more

More
$7.43

IN STOCK
Ships Today Guaranteed
Add to Cart
3/8-16 Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0654A

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Bell Washer
Genuine Mtd part
By: Mtd
Part Number: 736-0105

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

More
$4.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Contoured Washer Trim
Genuine Ge part
By: Ge
Part Number: WB02X32440

Contoured washer trim secures and cushions range components, maintaining proper alignment and reducing wear. Replace if worn or damaged. Verify fit with your model.

More
$19.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488234

Size: 8-32 x 1/4 inch.

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Locknut (Threaded Retaining Nut)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY707702

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

  • Secures shafts, pulleys, or fittings to prevent axial movement
  • Keeps assemblies fastened under normal vibration and load
  • Helps stop wobble, grinding, or part separation caused by a loose connection
  • Works with the matching threaded stud, shaft, or fitting for a proper hold
What's included: One locknut Install notes:
  • Disconnect power and follow appliance safety procedures before servicing
  • Use the matching thread size and engage threads fully; hand-start before tightening
  • Tighten securely without overtightening; use the correct driver or socket for the nut
  • Inspect mating threads and replace if damaged

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Ring-Retaining
Genuine Midwest Engine part
By: Midwest Engine
Part Number: 691265

 

More
$1.76

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google