31203Pav Magicchef Range Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12400035
Oven won't heat or ignite? This igniter kit solves slow heating and ignition failure in gas ovens. Moderate DIY repair in 30-60 minutes.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Gas igniter glows, but will not light
-
Little to no heat when baking
-
Gas smell
See more...
Do-It-Yourself Stories from Customers like You
Magic chef broken oven igniter Richard C. • Kew Gardens , NY • July 13, 2015
Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately...
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001596
Burners won't light? No spark on any burners? The spark module generates sparks to ignite gas burners. Easy DIY repair—usually takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Burners would not light Ronald G. • Dalton , GA • September 15, 2014
Replaced srark module
Read more
More
$74.95
- Compare At:
-
$88.44
- You Save:
-
$13.49
Genuine Whirlpool part
By: Whirlpool
Part Number: 74004053
Burner won't light or spark? This top burner igniter creates the spark to ignite gas on your stovetop. Easy DIY repair in under 5 minutes with a screwdriver.
This part fixes the following symptoms
-
Gas igniter glows, but will not light
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Burner on my jen air pro range rusted out Frank M. • Providence , RI • November 15, 2014
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did...
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387230
Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10282492
Replace your oven's missing, warped, or discolored rack. This sturdy metal rack installs on side rails for stable baking and roasting surfaces.
Do-It-Yourself Stories from Customers like You
Oven racks no longer shiny Ron N. • Menomonee Falls , WI • September 15, 2014
Appliances will be sold with the house so the old oven racks were no longer shiny. Replacement racks present a better looking oven.
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7212P043-60
Oven door seal creates an airtight barrier to prevent heat loss and maintain proper temperature. Replace when torn, cracked, or loose. Verify fit with model.
Do-It-Yourself Stories from Customers like You
Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises.
Read more
More
$53.21
- Compare At:
-
$63.85
- You Save:
-
$10.64
Genuine Whirlpool part
By: Whirlpool
Part Number: W11665456
Adjustable leveling leg that stabilizes and balances your range. Replace if cracked, broken, bent, or threads are stripped from wear or impact damage.
Do-It-Yourself Stories from Customers like You
2 leveling legs on a range had been damaged by tilting the appliance the plastic threads were broken William R. • Cary , NC • June 28, 2014
The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length.
One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area...
Read more
More
$23.61
- Compare At:
-
$28.33
- You Save:
-
$4.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3412D024-26
This is a replacement sealed burner cap. This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This part is intended to replace a broken, misplaced, or defective burner cap in various models of gas ranges and stoves. Electrodes are included.This sealed burner cap protects the surface burner and allows the cooktop to light properly. If the gas igniter is glowing but does not ignite, the stove won't start up, or there will be a gas smell. Proper tools may be required to replace this part. Always ensure the appropriate safety precautions are adhered to when attempting to fix any appliances. Make sure that the stove is entirely disconnected from gas and power before starting the repair work. For more accurate information on how and where to install this sealed burner cap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this burner cap is suitable for use on several different models of gas stoves, ranges, and cooktops manufactured by Whirlpool, Maytag, KitchenAid, Amana, and other Whirlpool brands. This is a genuine part made of high-quality, durable materials and is sold individually.
Do-It-Yourself Stories from Customers like You
Burner rusted out inside Timothy K. • Bayville , NJ • September 06, 2014
These are very easy to replace ,just gave the old one a quarter turn lifted it out took the two wires off (noted where each one will go on the new burner ) pop the wires onto the new burner put it on and good to go.
Read more
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4159193
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Do-It-Yourself Stories from Customers like You
Hinges were weak Don M. • Colchester , VT • December 31, 2016
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair.
Read more
More
$8.56
- Compare At:
-
$10.27
- You Save:
-
$1.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3801F656-51
Anti-tip bracket bolts to the floor behind your range to prevent tipping. Replace if missing, bent, or damaged during moving or installation.
Do-It-Yourself Stories from Customers like You
Install anti tipping bracket for stove Nathan M. • Alexandria , VA • March 30, 2015
Part arrived quickly and was an easy install1
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74002390
Oven won't reach temperature or overheats? This thermostat monitors heating circuits and controls temperature. Moderate difficulty repair, requires back access.
Do-It-Yourself Stories from Customers like You
The oven dial and thermostat was malfunction Lashaun P. • Chicago , IL • March 02, 2019
My boyfriend is to do it yourself Mr. Fix-It type remind you that I am also inquisitive when it comes to building and repairing things, but not like him. He is definitely what you call a jack-of-all-trades basically self-trained.
Read more
More
$132.95
- Compare At:
-
$158.21
- You Save:
-
$25.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003976
A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:
- Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
- Holds panels and moving components at the correct distance to prevent binding or friction.
- A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
- Used where a smooth-bearing surface and controlled clearance are required between parts.
What's included: One shoulder screw. Install notes:
- Disconnect power to the appliance (unplug or shut off breaker) before servicing.
- Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
- Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.
Do-It-Yourself Stories from Customers like You
Replace igniter on gas oven (maytag) Jeffrey H. • Pelham , NH • January 03, 2020
I had to remove the oven door, which I learned is made to come off without tools. Then took out the bottom by removing two screws and lifting. Removed the screws attaching the igniter, pulled wires thru back until I could get the connector and disconnect. When the new igniter arrived, I had to change the connector. I cut the one off the old one, and spliced to the new one using solder and shrink tubing. Just reverse the procedure to install. I replaced the screws with new ones.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP59002061
Sheet metal pan head screw secures panels, brackets, and components to appliance cabinets. Replace missing, stripped, or corroded screws to restore fit.
Do-It-Yourself Stories from Customers like You
Spark electrode wires has aged and broke. Jonathan F. • Bartlett , TN • July 05, 2022
I ordered and replaced the old ignitor and the corroded mounting screws.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74005058
Bisque spacer that installs between range door handle and panel. Replace if cracked, broken, or missing to restore proper spacing and secure alignment.
Do-It-Yourself Stories from Customers like You
Stove handle Brenda A. • Monroe , LA • June 18, 2020
It worked great, fit perfect. Now I have a stove with a new handle. Thanks.
Read more
More
$11.95
- Compare At:
-
$13.17
- You Save:
-
$1.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP5187M026-60
Replace a worn or clogged gas burner orifice with this orifice fitting assembly to restore clean, controlled flame. It meters gas to the burner for reliable ignition and accurate flame size.
- Meters gas flow from the valve/manifold to the burner
- Supports reliable ignition and a stable, properly sized flame
- Common symptoms of a clogged or damaged orifice: weak or uneven flame, yellow tips, delayed ignition, or burner not lighting
- Replace if the fitting/orifice is stripped, deformed, or otherwise damaged
What's included: 1 gas burner orifice fitting assembly Install notes:
- Shut off the gas supply and disconnect power before servicing; allow the appliance to cool
- Access the orifice per your model's service instructions; remove burner components as needed
- Use the correct wrench; avoid cross-threading and do not overtighten
- After reassembly, restore gas and check all joints for leaks with a bubble solution; perform fuel-type conversions only with the proper kit and instructions
Do-It-Yourself Stories from Customers like You
Gas tubes to the orifice were cracked/leaking Mark E. • Avon , NY • September 29, 2014
I have a sealed cook top gas range. I lifted the cook top without removing the burner set screws thus breaking the two gas tubes to the front burners...dumb move. I ordered two new burner orifice assemblies and replaced the broken ones in about 15 minutes. It's a very easy fix. Remove burners by turning counterclockwise, unhook ignitor and ground wires, remove set screw (one under each burner), lift range top, loosen the brass nuts on each gas tube, remove damaged assemblies. Install new...
Read more
More
$78.60
- Compare At:
-
$93.53
- You Save:
-
$14.93