665147 Parts

This cap is a small protective cover designed to secure and seal a component opening on your appliance, keeping contaminants out and helping the assembly operate as intended. It's a simple replaceable part that restores proper fit and protection. What it does:

• Covers and seals a component opening to block dirt, lint, and moisture.
• Helps maintain proper alignment and retention of the underlying fitting or assembly.
• Common symptom: cracked, broken or missing caps can allow debris in or cause rattling.
• Common symptom: a worn or loose cap may fail to seat, reducing protection of the component.

• One cap as pictured

• Disconnect power and water before starting any work.
• Inspect the mating surface for damage or debris; clean before installing the new cap.
• Press or snap the cap into place until fully seated; do not force or pry.
• If the original cap was secured with clips or screws, retain or reuse them as required.

Standard metal hex nut that secures bolts and studs on compatible appliance assemblies. Replaces a missing or worn fastener to restore secure mounting for panels, brackets, and components and reduce vibration or rattling. What it does:

• Secures mating bolts, studs, and threaded fasteners to hold parts in place
• Helps prevent loosening from vibration and normal use
• Common symptom fix: loose panels, rattling or shifting components
• Small replacement part used wherever a matching threaded nut is required

• Hand-start threads to avoid cross-threading; tighten until snug
• Use the correct socket or wrench; avoid overtightening to prevent damage
• Disconnect power or move the appliance to a safe working position when accessing internal hardware

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This control panel is the front console assembly that houses the oven/range user interface and display, restoring access to touchpads and controls for normal operation. It replaces a cracked, unresponsive, or damaged control surface. What it does:

• Provides the user interface and display for setting cook modes, temperatures, and timers
• Restores response when buttons or touchpads are unresponsive or intermittently work
• Replaces a cracked, faded, or cosmetically damaged control surface
• Can resolve display errors or missing characters caused by a faulty panel or overlay

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle the panel and display with care to prevent scratches and static damage
• Installation typically requires removing the range/oven console bezel and unplugging/reconnecting the ribbon or wiring harness

This center basket lid secures the top of the washer basket and helps keep laundry contained during the wash and spin cycles. It replaces a cracked or missing lid to restore proper operation and reduce fabric snags. What it does:

• Covers the center of the tub/basket to keep clothes from catching on the agitator or basket edge
• Helps maintain balanced load containment during agitation and spinning
• Prevents small items from falling into the basket gap or drain area
• Restores the washer's intended interior protection and appearance

• One center basket lid

• Disconnect power and water supply before starting any repair
• Remove the dispenser/console or top panel only if required by your model; follow factory service instructions
• Handle replacement parts carefully to avoid scratching the tub or lid finish

This replacement refrigerator door gasket creates a tight seal around the fresh-food compartment door to help keep cold air in and warm, humid air out, improving cooling performance and reducing frost buildup. What it does

• Forms an airtight seal around the fresh-food door to help maintain interior temperature
• Helps prevent warm air and moisture from entering, reducing frost and condensation
• Can reduce compressor runtime caused by a leaking door seal
• Common symptom: visible gaps, tears, or warped edges around the door; uneven cooling or frost along the door perimeter

• One refrigerator door gasket

• Inspect and clean the door flange before installing to ensure a proper seal
• Start installation at the corners and work around the perimeter, pressing the gasket into the channel to seat it evenly
• Warm the gasket slightly if needed to make it more flexible for fit; avoid overheating
• Disconnect power only if required by your refrigerator model and follow all safety precautions

This wire harness is the factory-style electrical connector assembly that routes power and control signals between components to restore proper circuit connections and device operation. It replaces a damaged or broken harness to help appliances function safely. What it does:

• Provides the factory wiring connections between control, switches and motors or sensors
• Carries power and signals so components can operate together
• Restores broken, frayed, or melted wiring that can cause intermittent failures or no power to circuits
• Helps prevent arcing and poor connections from damaged wires or terminals

• Always unplug the appliance (or disconnect power at the breaker) before replacing wiring
• Note wire routing and connector orientation, or take photos, to ensure proper reassembly
• Secure harness with existing clips and fasteners; avoid pinching or stretching wires
• If terminals are corroded or connector housings are damaged, replace them rather than modifying the harness

This control panel is the appliance's user interface that houses the touchpads, display and control electronics so you can select cycles and monitor status. Replaces a worn, cracked or unresponsive front control surface to restore normal operation. What it does:

• Provides the controls and display for selecting oven/cook settings and viewing cycle status
• Transmits user commands to the appliance's electronic control board
• Commonly used when buttons, touchpads, or the display are cracked, faded, or unresponsive
• Helps resolve issues where settings won't register or the control surface is damaged

• Disconnect power to the appliance before beginning any work to avoid shock.
• Handle the assembly carefully to avoid damage to the display, touchpad or connectors.
• Verify connector orientation and seating; do not force connections.