752720521121 Parts

A carburetor gasket works by providing a secure seal, preventing leaking between the carburetor and the insulator plate. Over time, gaskets can become worn down, cracked, or torn. This affects the efficiency or your equipment’s engine. If your carburetor has a leak due to a damaged carburetor gasket, the engine may run roughly or not start at all. This repair should be easy and take only a short time. Remove the damaged carburetor gasket and replace it with a new genuine OEM part. A set of screwdrivers is needed to make this repair possible. The carburetor gasket will work with small engines like log splitters, snowblowers, and tillers. Some of the many brands that are compatible with this carburetor gasket are Craftsman, Cub Cadet, MTD, Troy-Bilt, Yard Machines, and Yard-Man. Sold individually.

This replacement part is a camshaft assembly. This is a genuine replacement part made by MTD. This part is a rotating metal object that converts rotational motion to reciprocal motion. This ensures that the machine is able to move successfully according to the user's preferences at any given time. A new camshaft assembly might be needed if the user notices the engine is not working up to the normal standard. This can be from a faulty camshaft assembly and should be replaced if this is the case. Be sure the engine is turned off before attempting this repair to ensure the safety of the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement control panel This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective control panel in a variety of snow blower and snow thrower models. The control panel enables the user to properly control the snow blower or snow thrower. This control panel will require replacement with a genuine OEM part if faulty in any way. When working on or near any mechanical equipment, it is important that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this control panel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this control panel is suitable for use on several different models of snow blowers and snow throwers manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a piston pin. This is a genuine replacement part made by MTD. This part is small but important to ensure that the piston is working properly during use. A new piston pin might be needed if the current one is missing or damaged. It is not uncommon for the pin to be stripped down over time due to normal wear and tear. The pin may also become lodged in place and should be replaced if this happens. Wear work gloves when completing this repair to prevent injury during the job. The engine should be completely turned off and cooled down before beginning repairs.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is an MTD rocker arm. The rocker arm works in conjunction with the engine and head. The job of the rocker arm is to push the intake valve open, allowing fuel and air to enter the cylinder. Since the rocker arm is a part of the head gasket system, any damage can cause the engine to run extremely weak. There could also be a noticeable clicking or ticking noise originating from the engine area of the mower. A visual inspection of the rocker arm will confirm any damage. Begin the repair by removing the muffler guard. After removal, move to the valve cover and remove that guard as well. Disconnect the fuel and air lines running to the head. Remove the spark plugs in the valve section. Finally, the rocker arm can be removed using a socket wrench. Repeat these steps in reverse to install the new rocker arm.This product is sourced directly from the manufacturer as a genuine OEM part. The component is available individually, separate from the original machine. This part is compatible with MTD and Cub Cadet brand equipment.

This part is a replacement intake valve seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or worn intake valve seal in outdoor power equipment.The intake valve seal prevents leaks and seals the intake valve, which can be found inside the engine housing. Valve seals should be checked regularly and replaced if worn, brittle, broken, or ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular intake valve seal, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This intake valve seal can be used with a variety of outdoor power equipment models manufactured by MTD, Craftsman, and other brands.

This piston pin snap ring is a genuine MTD part, sold individually. This piston pin snap ring can be used as a replacement part in a lawn mower or a snowblower. This part stabilizes the pistons within the equipment's engine.The piston pin snap ring might be subject to damage within the standard lifespan of a lawn mower or a snowblower. This could occur in the form of puncturing, tearing, ripping, denting, cracking, or eroding, and if the damage is severe enough to preclude the piston pin snap ring from keeping its fastened components in place, the piston pin snap ring should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This piston pin snap ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is a piston pin. This is a genuine replacement part made by MTD. This part is small but important to many types of equipment. This pin helps to hold certain pieces in place and allows for parts to stay secure during use. A new piston pin might be needed if the current one is no longer able to stay in place properly. This can be due to any number of reasons but should be replaced if this is the case. It is not uncommon that the pin may have become stripped over time and can no longer function properly. Wear work gloves during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This part is a replacement valve spring retainer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective valve spring retainer in outdoor power equipment.This valve spring retainer is a small part but is essential for proper and safe equipment functionality. It will need to be replaced with a genuine OEM replacement part if broken, worn, or ineffective in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this valve retainer spring, the appropriate owner's manual and equipment diagrams should be referred to. This valve retainer spring is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is an exhaust valve adjuster. This is a genuine replacement part made by MTD. This part is commonly found on any type of machine that uses exhaust to expel smoke and other debris. The adjuster ensures the valve is set to the user's preferences. A new exhaust valve adjuster might be needed if the current one is unable to be adjusted or is stuck in a certain setting. This can be due to normal wear and tear over time or from a singular incident causing it to no longer work. Be sure to wear work gloves to ensure safety during any repair. It is also recommended that the engine be turned off before beginning. This exhaust valve adjuster is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This exhaust valve spring is a genuine MTD part, sold individually. This exhaust valve spring can be used as a replacement part in lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of the exhaust valve spring is to regulate the passage of materials in and out of the exhaust valve, which is maintained through spring tension.Damage to this compoennt could manifest in the form of puncturing, denting, scraping, cracking, warping, or eroding that can wear away at the spring tension and negate the functionality of the spring.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This exhaust valve spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and MasterCut.

This replacement part is a piston, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This piston is commonly found in lawn mowers and is an important part in the user process. Pistons help transfer the combustion power of the engine to other working parts of the machine. A new piston might be needed if the overall performance of the engine is lacking compared to previous uses. If the lawn mower is not able to build enough power to accelerate, the piston might be faulty. It is also common for the engine to use an excessive amount of oil or put out white or gray exhaust smoke. All of these indicators might mean that the piston should be replaced. This part is a genuine OEM replacement part. This piston is sold individually and can be used in lawn mowers manufactured by MTD.