Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Freezer not defrosting or frost building up? This defrost heater melts ice off evaporator coils so cold air flows properly. DIY repair in 30-45 minutes.
Drawer tray assembly forms the shelf frame that supports and guides refrigerator drawers. Replace if cracked, broken, or worn to restore smooth operation.
This leveling leg assembly stabilizes and levels your refrigerator so it sits solidly on the floor and the doors align correctly. Replacing a worn or stripped leg helps reduce rocking and vibration and restores smooth leveling adjustment.
Pulled off the outer housing, unscrewed the bolt,replaced with new. Read more
Supports and guides refrigerator drawer for smooth sliding. Replace this rail guide if cracked, broken, or worn to restore proper drawer alignment and operation.
Ordered drawer rails Read more
This dispenser lever holder is the mounting bracket behind the refrigerator's dispenser paddle. It supports and aligns the lever and switch so water or ice dispenses reliably when the paddle is pressed.
I ordered the parts and watched your video(which was great) and the fix went perfect.Thanks! Read more
Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.
Order the part with the help of the online person. Read more
Plastic tube that routes water between internal refrigerator components. Replace if cracked, kinked, leaking, or brittle to restore water flow.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
This is the condenser fan motor assembly located near the compressor at the back or bottom of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigeration system running efficiently. Replace this motor if the refrigerator is running warm, the compressor is overheating, or you no longer hear the fan running when the compressor is on.
Replace a cracked or worn drawer rail guide assembly in your refrigerator. Supports and guides pantry, crisper, or freezer drawers for smooth sliding.
Pulled out the cover assembly and replaced the middle rail guide and the glass frame support. Very easy, simply needed a screw driver to take apart the assembly. Read more
Ice won't dispense but ice maker works? The ice bucket assembly stores and moves ice to the dispenser. Includes auger mount. DIY-friendly replacement.
Replaced with a new ice maker. Read more
This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.
Originally, replaced the door open/close motor thinking it was failing, but after a while ice chute door started to not fully open again. That left only two other failure modes - - signal pulse duration from control board, or the convoluted plastic link, lever, and cap assembly shaft binding/bending. Replaced them all. Since then operating correctly - - no further issues. It is possible the plastic levers and/or door cap shaft was binding, or bending, not allowing the cap to fully open. For... Read more
Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.
Replaced the LED lamp assembly Read more
This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.
I was kind of guessing at the parts that I needed, but the parts diagrams were a huge help, and I narrowed it down to the bushing and stopper on the right door. I removed the door and was able to replace the parts pretty easily. Now the fridge door works good as new. Read more
Rail guide assembly that supports and steers refrigerator drawers along their tracks. Replace if cracked, broken, or worn to restore smooth sliding.
I was unable to find the snack drawer guide which was mounted under the middle of the large shelf for my LG refrigerator. In the parts description for my model the snack drawer was mounted under a small shelf. By ordering a right hand drawer guide with a right hand shelf bracket, I was able to move the left shelf bracket and guide from the large shelf to the small shelf. Take the right small shelf bracket and put it on the large shelf. Install the new parts to the right side of the small... Read more
The Screw is an OEM part for LG refrigerators. This part secures the shelf brackets within the refrigerator compartment.
Causes of a bad Screw can range from physical damage or impact to general wear and tear over time.
Symptoms of a faulty Screw include:
This OEM LG part is also compatible with some Kenmore models.
Kenmore Elite refrigerator 795.77542600 Fixed by replacing crisper cover. The purchased crisper cover lacks the printed pictures and text that was present on the front of the original, but it was no big deal. The difficult part of the repair was transferring the (1) plastic humidity adjusters for vegetable/fruit drawer, (2) plastic crisper drawer covers, and (3) metal bar on front underside of crisper cover. Removal of the adjusters and drawer covers requires you to bend/distort the plastic... Read more
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
I changed the compressor, dryer and upgraded the software. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.