7962927 Parts

This cover cap replaces a worn or missing finishing cap to restore a clean appearance and protect an exposed fastener or opening on compatible LG appliances. It helps keep dirt and moisture away from the underlying hardware. What it does:

• Covers and protects exposed screws, bolts or openings to improve appearance.
• Helps reduce debris buildup and potential corrosion on the underlying hardware.
• Restores the finished look when the original cap is cracked, broken, or missing.
• Simple cosmetic replacement that prevents small objects from entering the opening.

• Snap-in or press-fit style; align with the opening and press firmly until seated.
• If a fastener is present, remove the fastener before installing the cap; reuse the original fastener.
• Disconnect power and water before servicing to reduce risk of shock or damage.
• Use a non-marring tool and moderate force to avoid scratching surrounding surfaces.

This replacement holder is a small mounting bracket used to secure components inside the appliance, restoring proper alignment and support so parts sit firmly and operate as intended. Ideal when a cracked or worn holder causes instability. What it does

• Secures internal components or assemblies to prevent movement or vibration
• Restores proper alignment when a damaged holder allows parts to sag or shift
• Helps reduce noise from loose or unsecured components
• Commonly replaced when the original holder is cracked, broken, or missing

• Turn off and unplug the appliance before beginning any repair.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.
• Use appropriate hand tools; avoid forcing parts to prevent further breakage.

This softener dispenser cap replaces the worn or cracked cap that covers the fabric softener chamber, restoring proper containment and controlled release of liquid softener during the wash cycle. A simple, low-cost part that prevents leaks and keeps the dispenser functioning. What it does

• Covers and seals the fabric softener compartment so liquid stays in the dispenser until the rinse cycle.
• Helps prevent softener from leaking into the washer drum between cycles.
• Restores a secure fit when the original cap is cracked, warped, or missing.
• Resolves issues with softener dispensing at the wrong time or pooling in the dispenser.

• One softener dispenser cap (1 piece)

• Disconnect power to the washer before accessing internal parts and follow all safety precautions.
• Typically accessed by removing the dispenser drawer or top panel—refer to your washer's service instructions.
• Inspect surrounding dispenser components for damage and replace any worn parts to ensure a proper seal.
• No electrical connections; basic hand tools may be required.

This accessory assembly is a genuine replacement component that restores the appliance's accessory fit and function. It installs in the accessory area to secure and connect related parts for reliable operation. What it does:

• Replaces a damaged or missing accessory assembly to restore proper attachment and alignment
• Secures accessory components so controls and moving parts operate smoothly
• Commonly used when accessories are loose, broken, or no longer seating correctly
• Helps prevent rattling, misalignment, or intermittent accessory-related issues

• Disconnect power (and water, if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for exact steps
• Keep fasteners and small parts organized during removal and reassembly

This bracket assembly secures internal components to the appliance frame, restoring stable support and alignment for panels or assemblies. Replacing a damaged bracket helps stop rattling and prevents misalignment that can affect operation. What it does:

• Provides a secure mounting point for panels, control boards, or internal assemblies
• Restores proper alignment to reduce vibration, noise, or rubbing parts
• Prevents loose components that can cause intermittent contact or wear
• Re-establishes structural support after impact, corrosion, or bracket failure

• One bracket assembly

• Verify power is disconnected before starting any repair
• Inspect mounting screws and adjacent parts; replace any damaged fasteners
• Tighten to manufacturer torque where specified and confirm proper alignment

This detergent box is the molded dispenser drawer that holds and releases liquid or powdered detergent into the wash tub during cycles, helping ensure detergent is delivered where needed for cleaning. What it does:

• Holds liquid or powdered detergent and channels it into the washer during the fill and wash cycles
• Helps prevent detergent from spilling into the cabinet or away from the wash water
• Common symptom of failure: detergent leaks, fails to dispense, or sits in the drawer instead of flowing into the tub

• One detergent box (dispenser drawer) as shown

• Remove power and water connections before accessing the dispenser area
• Inspect surrounding seals and mounting tabs; replace if damaged to ensure a proper fit
• Clean the dispenser area and rinse with water before installing the new box to remove residue

This suspension assembly supports the washer drum and helps stabilize the tub during spin cycles to reduce vibration and noise. Use it to restore normal drum alignment and improve washer operation. What it does:

• Secures and cushions the washer drum to limit excessive movement during agitation and spin
• Reduces vibration and knocking noises caused by a loose or worn suspension
• Helps maintain proper drum alignment for even washing and spinning
• Commonly replaced when the washer shakes, rocks, or makes heavy banging sounds during spin

• One suspension assembly as shown

• Disconnect power and water supply before beginning any repair
• Replacement typically requires opening the washer cabinet and supporting the drum; follow OEM service instructions
• Inspect adjacent parts (shocks, springs, mounts) and replace if worn for best results

This tapping screw fastens appliance panels and components for a secure, lasting hold. Replace stripped, rusted, or missing hardware to restore proper fit, reduce vibration and rattling, and keep brackets, covers, and trim tightly in place.

• Fastens metal or plastic panels, trim, or brackets to the appliance cabinet/frame
• Cuts its own threads in pre-drilled holes for a tight, reliable fit
• Helps maintain alignment and reduce movement that can cause noise
• Replace when the original screw is missing, stripped, corroded, or will not tighten

• Disconnect power and shut off water/gas before servicing
• Match the screw's position and length to the original hardware
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any washers or spacers from the original assembly if present

This bracket assembly secures and supports internal appliance components, restoring proper alignment and stability to parts that have shifted or come loose. It provides a direct replacement to maintain safe, reliable operation. What it does:

• Provides a sturdy mounting point to keep panels, modules, or assemblies properly positioned
• Helps eliminate rattling, misalignment, or loose component movement
• Restores intended structural support after impact or wear
• Works as a direct-fit replacement to return original fit and function

• One bracket assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate tools and keep fasteners for a secure fit; replace damaged screws as needed
• Inspect surrounding components and wiring for damage before reassembly

This detergent dispenser box assembly holds and delivers liquid or powdered detergent to the wash chamber, restoring proper dispensing when the original detergent drawer is cracked, clogged, or leaking. Designed as a direct replacement assembly for compatible LG front-load washers. What it does:

• Houses the detergent and fabric softener compartments and channels solutions into the washer at the correct time.
• Restores proper flow when the original dispenser is cracked, warped, or blocked.
• Helps prevent detergent leaks that can cause residue build-up on the door or front panel.
• Compatible with automatic dispensing cycles so detergents are released during the correct wash phase.

• One complete detergent dispenser box assembly as shown.

• High-level replacement: usually accessible from the washer front; remove the front access panel or drawer trim as required.
• Disconnect power and water supply before beginning service to avoid shock or unintended operation.
• Inspect surrounding seals and cabinet for damage; replace any cracked clips or hoses as needed.

This spring-style hose clamp secures flexible hoses to fittings to help maintain a watertight connection and prevent leaks. A simple replacement when the original clamp is worn, bent, or no longer holds tension. What it does:

• Holds washer, drain, or water-supply hoses firmly on barbs and fittings
• Restores clamping tension to stop drips or slow leaks at hose connections
• Prevents hoses from slipping off under pressure or vibration
• Helps maintain proper fluid flow by ensuring a tight seal

• One hose clamp

• Disconnect power and shut off water supply before servicing plumbing connections
• Use pliers or the appropriate clamp tool to expand and position the clamp; release slowly to seat it
• Replace any damaged or corroded hoses or fittings for a reliable repair

This inner tub hub connects the washer's inner drum to the drive assembly, providing a secure rotational link so the drum can spin properly. Replacing a damaged hub restores drum stability and reduces noise or wobbling. What it does:

• Secures the inner tub to the drive shaft so the drum turns with the motor
• Prevents excessive movement, vibration, and scraping noises caused by a worn or broken hub
• Helps correct spin-related issues like uneven spinning or the drum not engaging
• Works with the tub assembly and other drive components to maintain proper drum alignment

• One inner tub hub

• Disconnect power and water supply, and fully drain the washer before starting
• Replacement generally requires removing the outer tub/inner tub assembly and transferring seals or gaskets as needed
• Use proper tools and follow OEM service instructions
• Inspect surrounding components (seals, bearings, suspension) and replace if worn to prevent repeat failure

This cover cap is a small plastic trim piece that snaps into place to protect and finish an appliance opening or fastener, restoring a clean, finished appearance and keeping dirt out of the recess. What it does:

• Covers exposed fasteners or openings to improve appearance and prevent debris buildup
• Helps protect internal components from dust and small particles
• Restores a worn or missing trim piece for a finished look
• Fits into a corresponding recess and secures by snapping into place

• Installation is generally push-fit; align the cap with the opening and press until it snaps into place
• Use a plastic pry tool if removal is needed to avoid scratching surrounding surfaces
• Disconnect power to the appliance before removing panels or working near electrical components
• Only replace parts that match your appliance's OEM specifications

This softener cap seals the fabric softener dispenser and helps direct liquid into the washer during the rinse cycle, preventing leaks and ensuring the dispenser empties properly. Simple replacement restores proper softener flow. What it does:

• Replaces a cracked, warped, or missing cap that can cause dispenser leaks or slow draining
• Helps channel fabric softener into the tub at the correct cycle instead of spilling into the washer
• Prevents dispenser area buildup and reduces drips that can stain clothing or the washer
• Matches OEM form to fit the factory dispenser housing

• One softener cap

• Turn off and unplug the washer before accessing the dispenser assembly
• Remove the dispenser drawer per your model's service instructions to access the cap
• Inspect surrounding dispenser components and seals; replace any damaged parts for best performance