Kenmore Washer 796.29272010 (79629272010, 796 29272010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
More
Genuine Lg part
By: Lg
Part Number: 6501EA1001R
Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.
Do-It-Yourself Stories from Customers like You
LG washing machine would not shut off cold water during rinse cycle Richard W. • Denton , TX • May 22, 2018
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and...
Read more
More
$64.22
- Compare At:
-
$76.42
- You Save:
-
$12.20
Genuine Lg part
By: Lg
Part Number: 6501KW2002B
Fix LE error codes and spinning problems with this washer rotor position sensor. Resolves machines that won't spin or make loud noises. Easy 5-10 minute fix.
Do-It-Yourself Stories from Customers like You
Le error code Phil S. • Sumas , WA • February 06, 2016
I watched the Appliance Parts Pro video and saw that it was a job that I could easily do. I ordered the Rotor Position sensor switch for about $21 on a Monday and it was delivered by UPS on Wednesday. The process was straight forward: 1) remove the back cover from the washing machine (4 screws), 2) remove the main bolt holding the magnetic drum on the motor; 3) remove the 6 bolts holding the coil on the motor; 4) remove the ground screw and wire harness clamp screw; 5) take the old sensor...
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Lg part
By: Lg
Part Number: 5221EA1008F
Fix a washer that won't fill with water or leaks into the tub when off. This inlet valve assembly controls water flow during wash cycles. DIY repair.
Do-It-Yourself Stories from Customers like You
Water was gathering in the bottom of the washer tub George C. • Crossville , TN • February 17, 2026
Replaced the inlet valve assembly.
Read more
More
$135.59
- Compare At:
-
$162.71
- You Save:
-
$27.12
Genuine Lg part
By: Lg
Part Number: 5006EA3009B
The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.
You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.
Symptoms of a bad Pulsator Cap include:
- The pulsator becoming loose or dislodged
- Unusual noises during the wash cycle
- Clothes not being cleaned properly
- The washer experiencing imbalance issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Was flashing an ( ue ) uneven code Carl A. • Cleveland , OH • March 15, 2016
We had a repair man come and tell us the needed repair at the cost of 70.00
I ordered the parts and saved money.
Read more
More
$46.31
- Compare At:
-
$55.11
- You Save:
-
$8.80
Genuine Lg part
By: Lg
Part Number: AEM73213001
Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.
Do-It-Yourself Stories from Customers like You
Kick clog error code Darin D. • Odessa , WA • May 05, 2016
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!!
Read more
More
$40.95
- Compare At:
-
$48.32
- You Save:
-
$7.37
Genuine Lg part
By: Lg
Part Number: FAB30598601
The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.
Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.
Symptoms of a bad Customized Screw include:
- The wash plate becoming loose or detached
- Ineffective washing due to improper motion of the wash plate
- Unusual noises during the wash cycle indicating a loose component
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
The pulsar plate came loose in washing machine. Larry R. • Las Vegas , NV • June 06, 2022
Replaced with a new screw and everything works fine. A very simple job that only took 15 minutes.
Read more
More
$19.76
- Compare At:
-
$23.32
- You Save:
-
$3.56
Genuine Lg part
By: Lg
Part Number: EBF61674802
Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.
This part fixes the following symptoms
-
Door latch failure
-
Won't start
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
Lid lock stopped working Eugenio V. • Chicago , IL • February 26, 2016
Replaced it with the part I ordered from you guys. I had originally had LG come and check it out but they quoted me a price 250 plus tax. I said no way this little piece can cost 1/4 of the whole washing machine. So after finding your price, I you-tubed on how to replace it and I did in 20 min. Thanks youtube and thanks to you guys for such a great price on this switch assembly
Read more
More
$135.59
- Compare At:
-
$162.71
- You Save:
-
$27.12
Genuine Lg part
By: Lg
Part Number: MCJ61861201
The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes.
Symptoms of a bad coupling washer include:
- The washing machine fails to spin or rotates very slowly
- Vibrations and noise during spinning
- Rubber couplings tearing or shredding prematurely
Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate.
This OEM LG part is also compatible with Sears/Kenmore washers.
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Lg part
By: Lg
Part Number: 4681EA1009C
The Clutch Motor is an OEM part for LG washing machines. This motor engages the clutch mechanism, allowing the washer to switch between agitating and spinning cycles effectively.
Causes of a bad clutch motor can include wear and tear over time, electrical issues, or mechanical failure due to overloading or improper use.
Symptoms of a bad clutch motor include:
- The washer not agitating or spinning
- Unusual noises during the wash or spin cycles
- The drum not rotating properly
- The washer stopping mid-cycle
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg washer e6 error code clutch error Michael S. • Apple Valley , MN • February 28, 2016
When I looked up LG washer E6 code on the web I saw the tip from LG: unplug the washer and call for service. To me that's a challenge. I saw the AppliancePartsPros.com story on Google, read it and decided to try the solution that worked for other people. A clutch shifter motor that was around $20. I checked a few local appliance parts stores and no one carried the part I needed in stock (even though their websites said available for pickup). I then ordered the part through AppliancePartsPros on...
Read more
More
$122.72
- Compare At:
-
$144.81
- You Save:
-
$22.09
Genuine Lg part
By: Lg
Part Number: 4861FR3068A
The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.
Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.
Symptoms of a bad clamp include:
- Water leaking from hose connections
- Hoses coming loose or detaching during operation
- Visible rust or damage on the clamp
- Poor water flow or pressure issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad bearings seal and spider David R. • Jacksonville , FL • February 04, 2017
If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it.
After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.)
Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Lg part
By: Lg
Part Number: 4413EA1004D
Fix squealing or grinding noises during spin cycles with this washer motor rotor assembly. Works with the stator to rotate the drum. Video guide available.
Do-It-Yourself Stories from Customers like You
Bearings let go in clutch, loud noise would not spin or cycle, code for out of balance came on and then LE for drum sensor, the rotor bushing got bent when the bearings went Guy G. • Portersville , PA • August 07, 2020
Ordered new clutch, rotor and drum sensor assembly. If your clutch bearings go, make sure you check rotor, stator and sensor for damage.
Read more
More
$185.73
- Compare At:
-
$219.16
- You Save:
-
$33.43
Genuine Lg part
By: Lg
Part Number: 4902FA1665W
Suspension rod assembly for washers. Installs to support the drum and absorb vibrations. Replace if worn, damaged, or causing balance issues during spin.
Do-It-Yourself Stories from Customers like You
Was flashing an ( ue ) uneven code Carl A. • Cleveland , OH • March 15, 2016
We had a repair man come and tell us the needed repair at the cost of 70.00
I ordered the parts and saved money.
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Lg part
By: Lg
Part Number: ACZ72910401
Fix dispenser overflow or leaking issues with this washer detergent drawer assembly. Channels water through detergent and softener compartments. DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine was knocking while in spin cycle. Lonnie B. • Blythewood , SC • October 13, 2017
One of the suspension rods was not working so I replaced the bad one and the other three . Tub has now leveled out and is spinning properly without making the noise. Have not needed to replace the pump but will do so if necessary. Thanks to Appliance Parts Pro for their prompt service and quality products.
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Lg part
By: Lg
Part Number: FAF30369201
Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.
Do-It-Yourself Stories from Customers like You
Was flashing an ( ue ) uneven code Carl A. • Cleveland , OH • March 15, 2016
We had a repair man come and tell us the needed repair at the cost of 70.00
I ordered the parts and saved money.
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Lg part
By: Lg
Part Number: 5215EA3003A
The Hose Assembly & Connector is an OEM part for LG washing machines. This assembly includes the hose and connector, which are essential for supplying water to the washer during operation, ensuring a steady and reliable flow.
Causes of a bad hose assembly and connector can include wear and tear over time, cracks or splits due to pressure or temperature changes, and damage from improper installation or handling.
Symptoms of a bad Hose Assembly & Connector include:
- Water leaks from the hose or connector
- Low water pressure or flow to the washer
- Visible cracks or splits on the hose
- Water not entering the washing machine properly
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Kick clog error code Darin D. • Odessa , WA • May 05, 2016
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!!
Read more
More
$46.31
- Compare At:
-
$55.11
- You Save:
-
$8.80