Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

8530995 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Support Washer (1-1/2-In Dia)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3388703

This flat support washer provides a stable bearing surface under a fastener. Its 1-1/2-in diameter helps distribute load, maintain spacing, and keep components aligned so hardware stays tight and assemblies operate smoothly. What it does:

  • Distributes clamping force to prevent pull-through and gouging
  • Maintains proper spacing and alignment between mating parts
  • Helps reduce vibration, rubbing, or wobble from a loose assembly
  • Replaces a cracked, deformed, or missing support washer
What's included:
  • One support washer
Install notes:
  • Disconnect power and shut off water/gas before servicing.
  • Note the order and orientation of any washers/spacers during disassembly.
  • Inspect mating hardware and surfaces; replace any worn or damaged parts.
  • Tighten fasteners to manufacturer specifications—do not over-tighten.

Do-It-Yourself Stories from Customers like You Drum support bearing failure.   Myron D. • Covington , KY • July 13, 2018

Simple fix, right parts fast. Read more

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Motor Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660658

This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You The dryer motor stopped working.   Kenneth M. P. • Saint Clair Shores , MI • December 05, 2021

I ordered a replacement motor from APP and installed it myself. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Clip Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279220

Includes two bumpers and two locking clips. You will use one or the other depending on hole size.

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$12.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Power Cord With Strain Relief
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820044

Replacement power cord that connects your washer to the wall outlet. Includes strain relief for cable protection. Needed when original cord is damaged, pinched, shorted, or worn. Direct plug-in installation.

Do-It-Yourself Stories from Customers like You Power cord got pinched and shorted out   Gary D. • Kentwood , MI • July 27, 2014

Bought a new cord and removed the back of the washer and unclipped the old and clipped in the new. 5 minutes tops. Read more

More
$80.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Motor Retainer Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10086010

Secures the motor to its mounting point in your laundry center. Replace if the retainer is worn, broken, or has lost tension to prevent motor misalignment.

Do-It-Yourself Stories from Customers like You Washing machine   Dan B. • Blueridge , GA • June 12, 2026

Replace motor hanger , grommets, and motor coupler Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Retainer Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: 285353

This retainer ring is a genuine OEM replacement part sourced directly from the manufacturer for use on front load washing machines to hold the boot seal in place. The boot seal is the gasket that seals the washing machine when the door is closed to prevent water from leaking. The retainer ring is located flush against the boot seal and has either a spring clamp or screw clamp that secures it. Over time, this ring may become damaged due to the washing machine's normal use and age. If the ring is not tight, the washing machine could leak when in use. If water is coming from the door, it is a good idea to inspect and replace the retainer ring and possibly the boot as well.Unplug the washing machine to prevent electrocution. Remove the front panel, the detergent dispenser, and the kickplate to access the retainer ring. Locate the clamp on the ring and loosen it. Remove the retainer ring and set it to the side. Inspect the boot and then install the new retainer ring. Tighten the clamp and reassemble the washing machine. This retainer ring is sold as an individual unit. It is designed specifically for washing machines manufactured by Whirlpool.

Do-It-Yourself Stories from Customers like You Washer would agitate but would not go into high spin sounded like spin was working though   Mario M. • Corona , CA • January 03, 2015

Im not a repairman, so all my knowledge to fix my washer came from either youtube or online chats. I posted this to help the next dad trying to save a few bucks. Door sensor... Since door sensor worked correctly, verified that by starting washer with door open, and agitate cycle would not start until door was closed. Meaning door sensor worked correctly. Timer... In high spin cycle washer sounded correcltly spinning, but when opening door, drum was was not moving. So timer was triggering... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP692490

Plastic drum baffle that lifts and tumbles clothes during drying. Replace if cracked, broken, detached, or missing from inside your dryer drum.

Do-It-Yourself Stories from Customers like You Baffle detached stripped screw holes   Judith R. • Chandler , AZ • August 09, 2014

I installed it my self by watching your video Read more

More
$71.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Anti-Rattle Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516

Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.

Do-It-Yourself Stories from Customers like You No spin on spin cycle   Richard S. • Beaumont , CA • August 28, 2015

Replaced clutch assembly which was a little tricky, but very doable. Just make sure to take your time. I do have to say that I am very impressed with AppliancePartsPro customer service when the replacement part also failed. A new clutch assembly was at my door step a few days later. I now has a working washer again. Thanks Again Appliance Parts Pro. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Motor Mount Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404162

Fixes excessive vibration and rattling from dryer motor movement. This clamp secures the motor to its bracket, restoring stability. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Motor locked up and was buried in lint due to the felt seal failing and letting lint into the motor area.   Steven O. • Shrewsbury , MA • February 06, 2022

Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: WP357213

Push-in.

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing   Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: W11684613

Replace a cracked or missing bracket to keep appliance components securely mounted and aligned. Restoring this support helps prevent movement, vibration, and premature wear, so the connected part operates as intended.

  • Provides a rigid mounting point for an associated component or assembly
  • Maintains correct alignment and spacing within the appliance
  • Helps reduce vibration, rattling, or shifting during operation
  • Replaces brackets that are cracked, bent, or broken
  • Common signs: loose or wobbly parts, misalignment, rattling noises, or visible bracket damage
What's included: 1 bracket Installation notes:
  • Disconnect power; also shut off the water supply before servicing
  • Wear cut-resistant gloves—bracket edges can be sharp
  • Reuse original screws/clips unless replacements are specified
  • Hand-start fasteners, align parts, and tighten evenly without overtightening

Do-It-Yourself Stories from Customers like You Drive belt support rollers and idler pulley worn.   Carlos W. • Port Orchard , WA • May 30, 2020

Disassembled dryer, replaced worn parts and reassembled dryer. Removed top cover, disconnected front connector, removed front panel, removed belt from idler pulley, removed washer drum and belt, replaced push clip, retaining clips, 2 support rollers and idler pulley. Reassembled in reverse order. Read more

More
$13.66

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw And Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3356311

This screw and washer is an OEM replacement part used for Whirlpool washers. It is used to secure the lid switch. Each screw is sold individually. The screw measures approximately 1 inch.

Do-It-Yourself Stories from Customers like You Water would continue to fill the tub.   David J. • Loveland , CO • September 22, 2023

Replaced the water inlet valve. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Centerpost Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546455

Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.

More
$18.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403636

Short baffle that mounts inside the dryer drum to lift clothes as the drum rotates. Replace if cracked, broken, or missing for proper tumbling action.

Do-It-Yourself Stories from Customers like You The dryer will me a buzzing but wouldn't turn   Jose B. • Berkeley , CA • April 02, 2017

I watched You Tube and it gave me an idea of what was was wrong.. The motor was frozen. There was not room here to comment about the service that I received . It is only one word fantastic, from the time I started chat with the rep to the time I finished. Amazing. I order the part on Tuesday and I received the parts on Wednesday. That night when I came back from work, I fixed . Everybody at home was happy that the dryer was back in business. Thank you guys and the amazing Representative that... Read more

More
$65.74

IN STOCK
Ships Today Guaranteed
Add to Cart
Terminal Receptacle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62889

Used for lid switch.

Do-It-Yourself Stories from Customers like You Washer was "dead" with a partially washed load and would not do anything   Jimmy M. • Hopewell , VA • September 19, 2014

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google