We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This lock mechanism secures the microwave door in the closed position, particularly on slide-out or over-the-range models. It engages to keep the door latched during operation and prevents accidental opening. Replace this part if the microwave door won't stay closed, won't latch properly, or if the unit fails to start because the door switch isn't being activated.
Disconnected power cable. Took off 8 screw from bottom of vent tray. Lowered tray to rest on a 12 in. bucket set on top of my elec. range and disconnected electrical clip from broken Vent Lock. Punched out the Vent Lock and inserted the new Vent Lock. Pushed to close and open the vent on the newly installed Vent Lock - problem solved. Read more
Most orders arrive by Wednesday, November 25
Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.
Bought new turntable. Read more
Fix uneven heating or broken turntable rotation with this microwave turntable assembly. Supports and rotates the glass tray for even cooking. DIY install.
It allowed the turntable to rotate level. Read more
Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.
Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more
Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.
LG Help-line said probably a failed magnetron, but since out of warranty,referred me to an authorized LG repair service. They wanted $79.95 service call to come out & diagnose problem. I ordered replacement magnetron for less than cost of a service call, Plus the part was delivered next day! Works like new again. Happy wife = happy life! Notes for DYI-ers: 1.Be careful removing over the stove microwaves--get help,they are heavier than you think. 2.Unplug microwave for 48 hrs, carefully... Read more
Complete hardware kit for mounting your microwave. Includes all brackets, screws, and fasteners needed for secure installation. Replaces missing or damaged parts.
Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.
It wasn't easy because this microwave over-the-stove light was difficult to find at a reasonable price. However, I did find one at AppliancePartsPros.com. Since the price was so reasonable, I bought 4 bulbs plus an interior light bulb and paid the same shipping price for all. Everything works great. Read more
Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.
Looked online and found that someone had experienced the same issue and had replaced the cooling fan assembly for the magnetron. I ordered the parts for the assembly (motor, fan, and support), and replaced them and this fixed the problem. It took about 10 minutes to replace the parts, but lowering the unit and disassembly took around 45 minutes. The most difficult part was getting the outer sheet metal cover back on after the repair, as it has a bunch of clips on each front edge that need to... Read more
Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.
I checked for the reasons there was no power to the microwave. Then I talked with the technician at AppliancePartsPros who stated that it was most likely a blown or defective fuse. My LG microwave has two thermal fuses, a fuse assembly with two prongs and a short (1 inch) barrel type fuse. I replaced all of them after viewing YouTube videos and then reviewing the diagram for my microwave on the AppliancePartsPrps website. That was very helpful in locating where the fuses were installed. It... Read more
Fastens panels, brackets, and covers inside the microwave cabinet. Replace if cracked, broken, or missing to restore secure mounting and alignment.
Bought the cover and the rivet put it on very easy repair Read more
The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.
Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.
Symptoms of a bad micro switch include:
This OEM LG part is also compatible with Sears/Kenmore models.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.
Ordered the proper part, installed it and the turntable now turns as required. Read more
Replace your microwave's cracked, scratched, or dented decorative front panel. This cosmetic cover installs on the exterior to restore appearance.
Captures grease and cooking residue from exhaust air to protect the blower and maintain airflow. Replace when saturated or damaged. Confirm fit with your model.
Inner perimeter trim that snaps onto the microwave door frame. Secures the door choke and maintains proper shielding. Replace if cracked, broken, or missing.
1. UNPLUG MICROWAVE FROM AC POWER. 2. REMOVE 8 SCREWS FROM BASE PLATE ASSEMBLY/ 4 ON EACH SIDE. 3. CAREFULLY LOWER BASE PLATE DOWN AND UNPLUG RANGE LIGHT POWER CABLE 4. PLACE BASE PLATE DOWN ON FLAT SURFACE GENTLY PULL OUT VENT DRAW TO REMOVE SPRING TENSION FROM EACH SIDE OF THE DRAW TRACK. 5. NOW REMOVE 4 SCREWS, 2 FROM EACH SIDE OF THE DRAW TRACK TO GET ACCESS TO THE 3 FRONT DECOR SCREWS FROM THE BACK. ( YOU NEED 8 INCH #2 HEAD PHILIPS SCREW DRIVER TO... Read more
Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.