Embraco Egy 90Hlp Parts

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

This Fuse is an OEM part for Frigidaire microwaves. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.

Fuses in microwaves can blow due to power surges, electrical faults within the appliance, or overheating caused by restricted airflow or malfunctioning components. A blown fuse prevents the microwave from operating as a safeguard against potential electrical damage or fire hazards.

Symptoms of a blown fuse include:

• The microwave suddenly stops working and doesn't turn on.
• No response from the microwave's control panel or display.
• The microwave is completely unresponsive, even when the door is opened or closed.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This glass turntable tray sits on the microwave's roller support to provide a stable, rotating surface for even heating. Replacing a cracked or missing tray restores safe operation and helps keep spills contained for easier cleanup.

• Provides a flat, heat-resistant surface for dishes and cookware
• Engages the center coupler to rotate food for more uniform cooking and defrosting
• Removes easily for cleaning and helps contain minor spills
• Common symptoms: cracked/chipped glass, wobbling, won't sit level, or tray no longer rotates due to a worn hub

• Unplug the microwave or switch off the circuit breaker before service
• Remove the old tray; wipe the roller ring and cavity floor clean
• Inspect the center coupler and roller ring for wear; replace if damaged
• Align the new tray with the coupler so it sits flat and turns freely; test with a microwave-safe cup of water

This Turntable Motor is an OEM part for Frigidaire microwaves. Responsible for the rotation of the microwave's turntable, which ensures even cooking and heating of food. This motor ensures that the turntable operates smoothly and reliably, maintaining the efficiency of your microwave.

A malfunctioning motor can lead to uneven heating or cooking of food, as the turntable is integral to the microwave's ability to distribute heat uniformly.

Symptoms of a faulty turntable motor include:

• The turntable does not rotate when the microwave is in use.
• Intermittent or erratic movement of the turntable.
• Unusual noises coming from the turntable area during operation.
• Food is unevenly cooked or heated, indicating inconsistent turntable motion.
• The microwave operates normally except for the turntable function.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Coupling is an OEM part for Frigidaire microwaves. This component serves as the connection piece between the motor and glass tray, facilitating smooth rotation of the tray during the cooking cycle. It transfers power from the motor to ensure proper movement of the glass tray as needed during the various cooking functions.

Causes of a bad drive coupling can include cracks, breaks or wear due to repeated use over time. Friction from continuous operation may cause damage or weakening of the coupling's construction.

Symptoms of a bad drive coupling include:

• The glass tray not rotating or tumbling during cooking functions
• Clicking or grinding noises coming from the motor area
• The coupling itself being visibly cracked, loose, or missing pieces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a factory electrical switch that opens and closes a circuit to control a specific function in your appliance. Replacing a worn switch restores reliable on/off control and can resolve unresponsive or intermittent operation. What it does:

• Opens/closes the circuit to send power or signal to the assigned component
• Helps correct no response, intermittent function, or a component stuck on/off
• Addresses issues from worn contacts, loose/broken actuator, or heat-damaged terminals
• Model-specific design; match terminal layout and actuator style to the original

• One switch

• Disconnect power (unplug or switch off the breaker) before servicing
• Access the switch and label or photograph wiring for reference
• Transfer wires one at a time to matching terminals; secure the switch in place
• Restore power and test operation before reassembly

This refrigerator crisper drawer holds produce in a separate compartment to help maintain moisture and organization. Replacing a cracked or missing bin restores proper storage and smooth sliding performance in your fresh food section.

• Stores fruits and vegetables in a designated compartment
• Helps maintain humidity and keep items organized
• Replaces drawers that are cracked, warped, or won't slide smoothly
• Common fix for broken tabs, hard-to-open bins, or items falling through

• Unplug refrigerator before service
• Fully extend and remove the shelf above if needed for clearance
• Slide the old bin straight out; align and slide the new bin onto the rails
• Do not force; check for obstructions on the tracks if resistance is felt

The Latch Board is an OEM part for Frigidaire microwaves. It controls the latch mechanism, allowing you to securely close and open the microwave door. It works with the door latch to ensure that the microwave door is securely closed during operation.

A bad latch board can be caused by electrical issues, component failure, or physical damage. Signs of a faulty latch board include the microwave door not closing properly, difficulty in opening or closing the door, or error messages displayed on the control panel.

Symptoms of a bad latch board include:

• The microwave door not closing or latching
• Difficulty in opening or closing the door
• Error messages related to the door latch

Replace your faulty or damaged latch board with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This thermostat is a temperature-sensing switch used in select appliances to control operation or provide over-temperature protection. It opens or closes the circuit at a calibrated point to help maintain proper, consistent performance. What it does

• Senses temperature at its mounting/location and switches contacts at a set point
• Regulates cycling of the system or ends a heating/cooling/defrost event as designed
• Helps prevent overheating or overcooling conditions and protects components
• Supports stable, reliable operation when the original thermostat fails

• Runs continuously or won't cycle off
• Shuts off too soon or won't turn on
• Inconsistent temperature (too warm/too cold)
• Erratic cycling or failure to maintain set temperature

• 1 thermostat

• Disconnect power before servicing; allow any hot surfaces to cool
• Note wire positions; move leads one at a time to the new thermostat
• Mount in the original location and orientation; ensure firm contact/fit
• Route any sensing bulb/capillary exactly like the original; avoid kinks

The Capacitor is an OEM part for Frigidaire microwaves. It is responsible for storing and releasing electrical energy to power the microwave's magnetron, which generates the high-frequency waves needed for cooking.

A bad capacitor can be caused by electrical issues, component failure, or physical damage. Signs of a faulty capacitor include microwave not heating properly, sparking or arcing inside the microwave, or unusual noises during operation.

Symptoms of a bad capacitor include:

• Microwave not heating  
• Sparking or arcing 
• Buzzing or humming sounds

Replace your malfunctioning or damaged capacitor with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Latch Board is an OEM part for Frigidaire microwaves. It controls the latch mechanism, allowing you to securely close and open the microwave door. It works with the door latch to ensure that the microwave door is securely closed during operation.

A bad latch board can be caused by electrical issues, component failure, or physical damage. Signs of a faulty latch board include the microwave door not closing properly, difficulty in opening or closing the door, or error messages displayed on the control panel.

Symptoms of a bad latch board include:

• The microwave door not closing or latching
• Difficulty in opening or closing the door
• Error messages related to the door latch

Replace your faulty or damaged latch board with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Magnetron is an OEM part for Frigidaire microwaves. It is responsible for generating the microwave energy that heats and cooks your food quickly and efficiently. It converts electrical energy which is then distributed throughout the microwave cavity.

A bad magnetron can be caused by electrical issues, component failure, or physical damage. Signs of a faulty magnetron include the microwave not heating food properly, unusual noises during operation, or complete failure to produce heat.

Symptoms of a bad magnetron include:

• Microwave not heating 
• Unusual buzzing or humming noises
• Failure to produce heat or power

Replace your defective or damaged microwave magnetron with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This infinite switch controls the heat level for an electric cooktop surface burner, restoring adjustable power to the element for even cooking and reliable temperature selection. What it does:

• Regulates electrical power to a single surface heating element so you can set low-to-high heat.
• Provides stepped "infinite" control positions rather than a simple on/off.
• Replaces a worn or failed control that causes a burner to not heat, stay stuck on one setting, or heat inconsistently.
• Uses standard spade-terminal connections found on many electric ranges.

• Disconnect power at the breaker before servicing—this part services live-voltage circuits.
• Access typically requires removing the cooktop or rear console; handle ceramic glass cooktops carefully to avoid cracking.
• Confirm terminal layout and mounting orientation before removal; take a photo of wiring for reassembly.

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This thermal fuse is a safety device that interrupts the defrost circuit when temperatures get too high, protecting the refrigerator from overheating and preventing damage to the wiring and components. What it does:

• Opens the defrost circuit if the evaporator area overheats to stop further heating and reduce fire risk
• Prevents the defrost heater from running when temperatures exceed safe limits
• Common symptom of failure: evaporator stays frosted and refrigerator cooling performance worsens
• Another symptom: defrost system never runs even though the timer or control calls for a defrost cycle

• Always disconnect power to the appliance before testing or replacing the fuse
• Locate the fuse on or near the evaporator/defrost heater assembly; exact location for your model
• Use proper insulation and connectors; do not bypass the fuse or use unapproved substitutes
• If the fuse failed, inspect the defrost heater, thermostat, and wiring for faults before reinstalling