Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Gwe 4200 Acb Wall Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WR55X10025

The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.

Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.

Symptoms of a bad Temperature Sensor include:

  • The refrigerator or freezer not maintaining the set temperature 
  • The appliance running continuously or more frequently than normal
  • Inaccurate temperature readings displayed  

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This part fixes the following symptoms
  • Fridge too cold
  • Too warm
  • Fridge runs too long
  • Freezer too cold
See more...
Do-It-Yourself Stories from Customers like You Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately   Eddie R. • Debary , FL • January 06, 2015

I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more

More
$16.30
Compare At:
$22.39
You Save:
$6.09

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ge Smartwater Mwfp Refrigerator Water Filter
Genuine Ge part
By: Ge
Part Number: MWFP

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

  • Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
  • Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
  • NSF/ANSI 42 and 53 standards
  • 6 Month lifespan filter
  • Carbon Block media
  • Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

  • Bad taste or odor in water and ice
  • Cloudy or discolored ice
  • Reduced water flow or pressure
  • Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This part fixes the following symptoms
  • Ice maker dispenses too little ice
  • Not dispensing water
  • Ice maker won't dispense ice
  • Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You Ice would not dispense   Steven A. • Magnolia , TX • June 23, 2014

By visiting your website, viewing the repair instructions and ordering the right parts. Very easy to understand and to do the repair.. Read more

More
$53.75
Compare At:
$84.60
You Save:
$30.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Grommet, Fan Motor
Genuine Ge part
By: Ge
Part Number: WR02X12008

The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.

Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.

Symptoms of a faulty or missing grommet include:

  • Air leaks or drafts around the fan motor area
  • Condensation buildup or frost formation near the motor shaft
  • Increased noise or vibration from the fan motor assembly
  • Reduced cooling efficiency due to air leakage

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Evaporator fan motor whining keeping me up at night then it sounded like rocks were in it   Judy P. • Lakeside , CA • March 30, 2015

It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more

More
$7.41
Compare At:
$8.82
You Save:
$1.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Door Assembly
Genuine Ge part
By: Ge
Part Number: WR17X11653

The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.

Symptoms of a bad Ice Door Assembly include:

  • Frost or ice buildup around the dispenser area
  • Ice escaping from the dispenser when not in use
  • Failure to dispense ice
  • Noise during operation indicating misalignment or malfunction

Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Door sweating
  • Frost buildup
  • Ice maker won't dispense ice
  • Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Door Bin Front
Genuine Ge part
By: Ge
Part Number: WR71X10761

The Door Bin Front is an OEM part for GE refrigerators. This component serves as the front barrier for door bins, helping to keep stored items in place and preventing them from falling out when the door is opened or closed. This front measures approximately 13 inches wide by 3-1/2 inches high.

Common causes of a bad door bin front include cracking due to impact, stress from heavy items, or general wear and tear from frequent use.

Symptoms of a bad door bin front include:

  • Items falling out of the door bin
  • The bin front appearing loose or detached
  • Visible cracks or breaks in the plastic
  • Difficulty in securing the bin front to the door bin

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken refrigerator shelf   Catherine B. • Glastonbury , CT • January 15, 2020

Part came in quickly. Fit right in. Read more

More
$21.95
Compare At:
$25.90
You Save:
$3.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Dispenser Solenoid
Genuine Ge part
By: Ge
Part Number: WR62X10055

The Ice Dispenser Solenoid is an OEM replacement part for GE refrigerators. It is a crucial component that controls the flow of ice from the ice maker to the dispenser chute.

Symptoms of a bad ice dispenser solenoid include:

  • Failure to dispense ice from the dispenser
  • Ice getting stuck or jammed in the dispenser chute
  • Continuous flow of ice even when the dispenser is not activated

Causes of a bad solenoid can include electrical malfunctions, physical obstructions preventing proper operation, or simply wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Ice maker won't dispense ice
  • Door sweating
  • Frost buildup
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$48.33
Compare At:
$57.56
You Save:
$9.23

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dorian Gray Freezer Door Gasket
Genuine Ge part
By: Ge
Part Number: WR14X36194

The Freezer Door Gasket is an OEM part for GE refrigerators. As the primary seal between the freezer door and the frame, it plays a critical role in maintaining proper insulation and temperature regulation within the freezer compartment. The gasket is designed with insulating materials to prevent the loss of cold air and absorption of warm air when closing the door. 

Causes of a bad gasket can include cracks, tears, or breaks that compromise the insulation over time due to regular use and door openings/closings. 

Symptoms of a bad gasket include: 

  • Rising temperatures within the freezer, leading to melting or frost buildup 
  • Accumulation of ice around the door seal
  • Difficulty closing/sealing the freezer door tightly 
  • Droplets or puddles of water forming around the base of the door

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The gasket on my freezer wasn't making a good seal   Charlie W. • Norfolk , VA • November 24, 2020

I found the part number and ordered it. Read more

More
$51.60
Compare At:
$61.92
You Save:
$10.32

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Led Cover
Genuine Ge part
By: Ge
Part Number: WR55X11132

The LED Cover is an OEM part cfor GE refrigerators. It is responsible for protecting and diffusing the light from the LED bulbs inside the refrigerator. It helps create a well-lit interior, allowing you to easily see and locate your food and beverages.

A bad LED cover can be caused by accidental damage or regular wear and tear. If the cover becomes cracked, discolored, or damaged in any way, it can affect the quality and distribution of light inside the refrigerator.

Symptoms of a bad LED cover include:

  • Dim or uneven lighting inside the refrigerator.
  • Flickering or intermittent illumination.
  • Dark spots in certain areas of the refrigerator.
  • Visible cracks or damage to the cover.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You What isn't! fan icing and dim lights   Martin C. • Roseville , CA • October 26, 2020

While waiting for parts for GE repair man to fix the fan issue the interior lights acted up, first one flickered and then went out followed by all the rest going dim. After reading stories on your web site, I ordered a couple of replacement lights and after installing the burnt out one they all came back to full strength! Thanks for the info and parts! Read more

More
$27.25
Compare At:
$32.43
You Save:
$5.18

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Evaporator Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X10185

The Evaporator Fan Motor is an OEM part for GE refrigerators. It circulates air over the evaporator coils, ensuring consistent cooling throughout the refrigerator and freezer compartments. The motor operates 9.75 volts DC. The motor has a 1/8" shaft and a 12" long, 4-wire harness.

You should replace the evaporator fan motor if it becomes faulty due to wear and tear, electrical issues, or physical damage. Over time, the motor bearings can wear out, or the motor itself can fail due to continuous operation.

Symptoms of a bad evaporator fan motor include:

  • The refrigerator or freezer not cooling properly
  • Unusual noises coming from the freezer area
  • Frost buildup in the freezer
  • The refrigerator running continuously without reaching the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Noisy
  • Fridge too warm
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Nothing worked except the light :)   Przemyslaw B. • Wallington , NJ • September 20, 2014

I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more

More
$85.69
Compare At:
$101.97
You Save:
$16.28

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Door Recess Spring
Genuine Ge part
By: Ge
Part Number: WR02X10585

The Door Recess Spring is an OEM replacement part for GE side-by-side refrigerators. It sits within the icemaker door frame to control movement and allow smooth closing/opening of the access point.

Causes of a bad icemaker door recess spring include wear and tear of thin metal coils repeatedly compressing over many years of filling cycles. Exposure to humidity intrusions from melting ice accumulates oxidation shortening spring elasticity. 

Symptoms of a bad icemaker door recess spring include: 

  • Difficulty opening and shutting the icemaker access door securely
  • Excessive slamming noise caused by abrupt closing
  • Sagging or improper alignment of the door against the frame  
  • Struggles retaining positioning of the transparent plastic doorway

This genuine GE replacement spring is compatible with Hotpoint, RCA and Kenmore models.

This part fixes the following symptoms
  • Door latch failure
  • Ice maker not making ice
  • Not dispensing water
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$6.53
Compare At:
$8.69
You Save:
$2.16

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Water Filter Rpwfe
Genuine Ge part
By: Ge
Part Number: RPWFE

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

  • Reduced water flow from the dispenser.
  • Unpleasant taste or odor in the water or ice. 
  • The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Needed new water and odor filters   Leslie R. • Peoria , AZ • August 06, 2016

Replaced filters Read more

More
$58.95
Compare At:
$93.36
You Save:
$34.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Union Connector
Genuine Ge part
By: Ge
Part Number: WR02X11330

The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure. 

Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.

Symptoms of a bad Refrigerator Union Connector include:

  • Water leaks at or near the connector area 
  • Inconsistent or no water flow to the ice maker/dispenser
  • Fluctuations in water pressure to the fridge
  • Water damage to surrounding kitchen areas from leaks

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water leaking from under/behind fridge (two sources) three problems a comedy of errors   Joanne R. • Brookfield , WI • November 09, 2015

We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more

More
$6.53
Compare At:
$9.03
You Save:
$2.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Run Capacitor
Genuine Ge part
By: Ge
Part Number: WR55X24064

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

  • The refrigerator compressor fails to start.
  • Unusual humming noises coming from the refrigerator.
  • The refrigerator cycles on and off more frequently than normal.
  • A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Would not run led dimmed condenser fan would not run   Pete M. • Santa Fe , NM • May 16, 2015

We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from... Read more

More
$50.95
Compare At:
$60.12
You Save:
$9.17

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Defrost Thermostat
Genuine Ge part
By: Ge
Part Number: WR50X10108

The Defrost Thermostat is an OEM part for GE refrigerators. This part is a safety device attached to the evaporator coil or nearby, and it functions by monitoring the temperature of the refrigerator's coils during the defrost cycle. When the coils reach a specific temperature, the defrost thermostat shuts off the defrost heater to prevent the refrigerator from overheating. 

Causes of damage to the Defrost Thermostat can include wear and tear over time, exposure to extreme temperatures that degrade its responsiveness, or electrical issues that cause it to fail. 

Symptoms of a bad Defrost Thermostat include:

  • The refrigerator or freezer compartment is too warm, indicating that the defrost system is not working correctly
  • Frost buildup on the evaporator coils that does not go away 
  • The refrigerator cycling on and off more frequently or running longer than it should 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Refrigerator section was warm, freezer section was working good.   Clinton M. • China Grove , NC • January 24, 2020

Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more

More
$20.95
Compare At:
$24.73
You Save:
$3.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Refrigerator Water Filter
Genuine Ge part
By: Ge
Part Number: XWFE

The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.

You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.

Symptoms of a bad water filter include:

  • Reduced water flow from the dispenser
  • Unpleasant taste or odor in water and ice
  • Cloudy or discolored water
  • The filter indicator light on the refrigerator signaling a replacement

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed a new water filter.   Frederick L. • Green River , WY • June 07, 2020

Ordered a new one. Read more

More
$63.46
Compare At:
$93.36
You Save:
$29.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Light Switch
Genuine Ge part
By: Ge
Part Number: WR23X37285

The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.

A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.

Symptoms of a bad light switch include:

  • Interior light not turning on when the door is opened
  • Light staying on even when the door is closed
  • Flickering or inconsistent light operation
  • Difficulty pressing or releasing the switch

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Refrigerator light switch broken.   W W. • Bettendorf , IA • April 20, 2020

I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more

More
$19.03
Compare At:
$20.93
You Save:
$1.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store