Thermador Pcg364e L/01 Parts

The Spark Ignition Switch is an OEM part for Bosch ranges and cooktops. It controls the ignition of surface burner flames by emitting an electrical spark when activated.

Causes of a bad switch can be general wear and fatigue over thousands of start cycles. Exposure to moisture, dust or metal debris could also damage electrical components internally.

Symptoms of a bad spark ignition switch include:

• Burners failing to light even when valves are turned on
• Intermittent or irregular lighting of some burners
• No electrical sparks emitted from the ignition electrode

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory fixing kit supplies the OEM hardware required to secure the appliance or designated components during installation or service. Replacing missing or damaged fasteners restores a solid, aligned mount so the unit stays stable without shifting, rattling, or gaps.

• Provides the correct hardware to fasten parts per your model's installation or service instructions
• Replaces stripped, corroded, or missing screws/clips that lead to looseness
• Helps maintain alignment and clearances to prevent gaps, rattles, or vibration
• Typical symptoms: loose mounting, panels that shift, or movement when opening/closing doors or drawers

• Disconnect power; shut off water or gas if applicable before starting work
• Follow the model-specific installation/service manual for attachment points and sequence; use the proper driver bit and do not overtighten
• Verify the unit is level and securely anchored; check clearances and operation after securing

Note: Kit includes 4 feet and a tube of RTV with instructions.

This gas pressure regulator controls and stabilizes incoming supply pressure to the appliance manifold, helping ensure consistent burner flames and reliable ignition. Replace if the original regulator is sticking or no longer maintaining correct pressure.

• Regulates incoming gas to the appliance's rated manifold pressure
• Helps maintain even flame height and proper combustion
• Supports reliable burner ignition and reduces flame-out from pressure swings
• Common symptoms include weak or uneven flames, yellow tipping, burners not lighting or not staying lit, or flames that are too high

• Disconnect electrical power and shut off the gas supply before servicing
• Observe the flow-direction arrow; install with outlet toward the appliance manifold
• Use approved gas-rated thread sealant on male threads only and leak-test all joints with a non-corrosive solution after installation

The Solenoid Valve is an OEM part for Bosch ranges. Located inside the control panel, the solenoid valve regulates gas to individual burners during the cooking cycle. It opens and closes electrically to direct fuel when its paired control knob is turned on.

Symptoms of a bad solenoid valve include:

• Inability to ignite or maintain a flame on specific burners 
• Burners failing to respond to control settings
• Hesitation or delay in burner engagement
• Range functions in an unpredictable manner

Causes can involve normal wear of moving internal parts, mineral buildup inhibiting valve movement, or physical damage. Failure reduces the range's functionality and safety.

This OEM Bosch part is also compatible with Thermador and Gaggenau models.

The Drip Tray is an OEM part for Bosch ranges. The drip tray catches any liquid spills, grease, or condensation generated during the cooking process. Its open design allows easy access for cleaning while contained drainage protects components.

Causes of a faulty drip tray can include cracks or punctures from impact, melting or warping from high heat exposure over time, or general damage during cleaning.

Symptoms of a bad range drip tray include:

• Grease or liquidAccumulation outside of the drip tray area
• Dripping or potential fire hazards if material collects on heating elements below
• Difficulty removing the drip tray for cleaning due to deformities or breaks

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
 

This temperature regulator is the mechanical thermostat that controls oven heat. It senses cavity temperature and cycles the heat source on and off to reach and maintain your set temperature for consistent baking and roasting performance. What it does

• Senses oven temperature via a capillary bulb and tube
• Opens and closes internal contacts to control the heating source
• Maintains the selected temperature during cooking cycles
• Help resolve: oven not reaching set temp, overheating or wide swings, uneven baking, or unresponsive temperature control

• 1 temperature regulator

• Disconnect power; shut off gas. Allow the appliance to cool completely
• Note the original routing of the sensing bulb and capillary; reinstall the new one in the same path and clips. Do not kink, sharply bend, cut, or shorten the tube
• Transfer any knob/shaft components as needed and align properly
• After installation, verify temperature with an oven thermometer and adjust per service instructions if applicable

The Re-Ignition Spark Module is an OEM replacement part Bosch ranges. It is an electronic component that generates sparks to reliably light the burners on a gas cooktop. Consistent sparking is necessary for fully lighting the burner flames and facilitating safe and efficient cooking operation.

Causes of a bad spark module can include normal component wear over time or damage from exposure to moisture or other contaminants. Improper cleaning methods could potentially impact performance.  

Symptoms of a bad spark module include:

• Burners not lighting or sparking when the knob is turned 
• Unreliable or intermittent lighting requiring multiple attempts
• Burner flames that emit an inconsistent or unstable pattern
• Sparks appearing outside of the burner ring pose a safety risk

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore model

The Grill Grid is an OEM part for Bosch ranges and ovens.  It sits within the grill cavity and allows for direct heat from the broiler to cook food from the top, as well as collect grease and drippings. 

Symptoms of a bad Grill Grid include:

• Warping or cracks that no longer allow it to lay flat
• Surface corrosion that has caused pitting or holes 
• Loose wires or joints that cause the grid to not secure properly within the cavity

Causes of a bad part can be normal wear and tear from high heat use over time. Grease and food particles left on the surface are also common causes of damage or corrosion. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

The Heater Element Range is an OEM component for Bosch electric ranges. It is responsible for generating precise heat to cook foods and bake consistently.

Causes of a bad element range include scaling or mineral deposits from repeated cleanings that interfere with heat transfer. Broken coils from rough handling can also disrupt heat output.

Symptoms of a bad heater element range include:

• Long preheat times unable to reach desired heat  
• Burnt exteriors but raw interiors when baking
• Disabled or reluctant-to-heat oven and broiler functions
• Hot and cold spots causing inconsistent results

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a worn, stripped, or missing screw helps keep parts aligned and tight, reducing vibration and preventing loosening during normal operation.

• Provides secure threaded attachment at the specified mounting points
• Helps maintain alignment of panels, brackets, and covers
• Replaces missing, rusted, or stripped hardware
• Typical symptoms: loose or rattling panel, misaligned trim, difficulty tightening, or a visibly missing screw

• Disconnect power and shut off gas/water before servicing
• Use the exact hardware specified for your model; lengths and threads are not interchangeable
• Hand-start threads to avoid cross-threading; tighten snugly—do not overtighten
• Retain and reuse any original washers or clips if present

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This replacement tube routes water between internal components to maintain a sealed, reliable flow path. Swapping a cracked or hardened tube helps stop leaks and restore proper circulation and overall appliance performance.

• Carries water between internal components and maintains proper flow
• Helps keep connections watertight to prevent drips and pooling
• Replace if you see leaks, visible cracks, kinks, or a loose fit
• Restricted flow from a worn tube can contribute to reduced cleaning/performance

• Disconnect power and turn off the water supply before servicing; allow the unit to cool
• Remove access panels and keep towels handy for residual water
• Note the original routing and connection depth; transfer any fittings or clamps from the old tube if applicable
• Push the tube fully onto fittings and secure; run a test cycle and check carefully for leaks