Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped making ice? The cycling thermostat monitors temperature to control ice production. DIY-friendly repair with video instructions.
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!! The do it yourself video was extremely helpful and made the repair very easy. Thanks so much for the great service and quick delivery !!! Read more
Secures and finishes the ends of refrigerator door shelves. Replace if cracked, broken, or missing to prevent items from falling off shelf edges.
I bought replacement parts Read more
Flexible gasket sealing washer door to drum, preventing leaks during cycles. Replace when torn, leaking, or showing mold buildup. Confirm fit.
Fixed by replacing the washer door seal "Bellows". Once again AppliancePartsPros comes through with the right part at a great price. It took quite some time to install because putting the inside spring back on the bellow was difficult so I needed to remove the top and front door of the washer to get better access. A set of 3 or 4 plumbing clamps are highly recommended to get that spring back on (I went to the store and bought some). If you search YouTube about replacing the bellows on your... Read more
Zinc door stop bracket mounts to the bottom of your refrigerator door to prevent over-opening. Replaces broken or missing brackets that no longer limit door swing.
Replaced the complete door assembly. Read more
Fix a washer leaking from the top or filling when not in use. This water inlet valve controls hot and cold water flow. Easy 30-minute DIY repair.
It was really easy to fix. I just took a screw driver and gently pried up on the top of the clothes washer to open up the top. Then the mixing valve was easy to access. I removed the two screws holding and unplugged the the wires. And pulled the old one free. Then reversed the process to install the old one. Less than thirty minutes start to finish. Read more
Replace your washer's cracked or broken outer door panel. This white plastic cover protects the door frame and attaches at the hinge. Restores appearance.
I took the door assembly apart by removing the 7 screws on the inner door and the 2 on the striker. I removed the hinge from the washer so that I could place it inside the door when I put it back together. This is much easier then trying to reassemble the door while the hinge is attached to the machine. Once I lined up all of the pieces properly, I screwed it back together and remounted the striker. I then put the entire door back on the machine by screwing in the three screws that hold on... Read more
Refrigerator not making ice? This ice maker assembly automatically fills, freezes, and ejects ice cubes into your bin. Moderately easy DIY repair.
It works great and I finally have ICE and Thank You very much and it's the right part THANK YOU ???? I FINALLY HAVE ICE ?? Read more
Refrigerator not cooling but freezer works? A failed condenser fan motor prevents heat from escaping. DIY repair takes 10-20 minutes with basic tools.
Removed the back cover to access the fan area. Clean the area with brush and vac first. Unplugged the Refrigerator. Used a socket set with 1/4" socket. Had an extended and a standard socket. Removed the condensate plastic drain from the bottom of the refrigerator to have more access to the fan. Unplugged the fan motor. Removed the two screws holding the fan in place. Removed the fan unit from the condenser side of the bracket. Place new fan on the fan and installed exactly the way I removed the... Read more
Door shelf bar that attaches to the interior refrigerator or freezer door to hold bottles and containers in place. Replace if broken, cracked, or missing.
Door shelf bar came loose or bottles falling? This refrigerator endcap secures retaining bars to door shelves. Simple snap-on install, no tools needed.
Looked up the parts list and diagram by serial number. Found the correct part numbers and ordered 2 crisper drawers, the meat drawer and the bar that holds bottles on the bottom shelf of the door. The diagram showed endcaps needed on the bar, but that was only for if the bar was for the freezer door. Parts were a little expensive, but we're beautiful and delivered in just a few days. I have endcaps I don't need, but might need someday if any of them in the freezer we're to break. Overall, it... Read more
Secures the door boot seal to prevent leaks in front-load washers. Replace if rusted, broken, or seal is loose. Verify fit with your model number.
Y'all! This video made fixing my washer easy peasy. The service repair man wanted $352! I paid less than $200 for the parts. I also called around and appliance parts pros was by far the cheapest option. The shipping was unbelievably fast. (Faster than my amazon prime!) Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more
Connects water supply to ice maker. Replace if cracked, broken, or leaking. Installs in freezer compartment with two screws. Essential for leak-free operation.
I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more
Inner door frame for front-load washers. Secures door glass and seal, maintains alignment. Replace if cracked, broken, or causing door to sag or misalign.
Removed the door at the hinge (3 screws). Removed the screws on the inside of the door holding the three sections together. Found one pin on the hinge broke OFF. Ordered parts. Arrived in 2 days. Re-assembled door and hung. Read more