Cabrio Washer Parts

This absorber is the factory-design replacement part that restores the appliance's intended absorption function, helping maintain normal operation and reduce related performance issues. What it does:

• Absorbs and manages moisture/condensate or trapped vapors in the appliance's system to support normal function.
• Helps prevent symptoms commonly linked to a failed absorber, such as excess moisture, unusual odors, or intermittent system cycling.
• Restores the original fit and function when the installed absorber is cracked, broken, or heavily degraded.
• Matches OEM shape and connection points for a direct replacement.

• One absorber replacement as shown

• High-level replacement: access the absorber location; no specialized calibration typically required.
• Disconnect power (and water supply if applicable) before removing panels or replacing parts.
• Handle carefully to avoid damage to surrounding components and wiring; use manufacturer-recommended fasteners.

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This plate stator is the stationary motor plate used in compatible Whirlpool appliance motor assemblies. It supports the motor's stationary components so the motor can run smoothly and reliably. What it does:

• Secures and positions the motor's stationary winding and magnetic components
• Helps maintain correct air gap between rotor and stator for proper motor function
• Can contribute to noisy motor operation or failure-to-start when damaged
• Supports consistent motor rotation and reduces abnormal vibration

• Disconnect power to the appliance before starting any repair.
• Removal typically requires disassembly of the motor housing; retain fasteners and note orientation.
• Handle carefully—edges and mounting holes can be sharp and fragile.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

This dispenser assembly replaces a damaged or worn refrigerator door dispenser trim and chute in a stain finish. It restores the dispenser pathway and appearance so water and ice can be delivered cleanly and the door looks finished. What it does:

• Replaces the dispenser housing and chute to restore a secure outlet for water/ice
• Helps stop leaks or dripping from a cracked or broken dispenser opening
• Restores proper alignment for dispenser buttons/lever actuation
• Improves door appearance by replacing faded, scratched, or discolored trim

• Disconnect power to the appliance before starting; remove stored food and water supply if needed
• Installation typically requires removing the refrigerator door panel or inner liner to access mounting fasteners
• Handle the dispenser and door trim carefully to avoid scratching the finish during installation

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Screw for control panel.

This replacement cap fits over the impeller on the dishwasher circulation/pump assembly to help protect moving parts and maintain proper water flow for effective cleaning. Restores proper fit and helps prevent debris contact with the impeller. What it does

• Covers and protects the pump impeller to help maintain correct water circulation.
• Helps reduce debris contact that can cause reduced cleaning performance or clogs.
• Can address symptoms like poor wash performance, weak water circulation, or unusual pump noise when the cap is damaged or missing.
• Works as the OEM-designed replacement for the pump/impeller cover in compatible units.

• One cap (impeller) as shown.

• Disconnect power and water to the appliance before starting any repair.
• Access typically requires removing the dishwasher tub access panel and pump housing—follow the OEM service manual for your model.
• Inspect the impeller and surrounding seal/gasket; replace damaged seals or fasteners as needed for a proper repair.

This user interface is the electronic control PCB that manages mid- and high-speed functions and touch/button inputs on compatible washers. It restores responsive controls and reliable command communication between the console and the main control. What it does:

• Receives and processes button or touch inputs from the console so cycles and options can be selected.
• Sends control signals to the main board and motors to engage mid/high-speed functions.
• Helps resolve unresponsive or intermittent console buttons, erratic cycle selection, or loss of control communication.
• Works as the interface layer between the user controls and the appliance's control system.

• One user interface (mid/high control PCB) as shown

• Disconnect power before servicing to avoid electric shock or damage to electronics.
• Handle the PCB by edges and avoid touching components or connector pins to prevent static damage.
• Verify connector alignment and seat firmly; do not force connectors or bend pins.