Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Cap2762mqo Parts

Best Seller
Lid Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054980

This lid switch is the washer's safety interlock. It detects when the lid is closed so the machine can agitate and spin, and cuts power when the lid is opened to stop operation and enhance user safety.

  • Monitors lid position and allows agitation/spin only when the lid is closed
  • Interrupts motor operation if the lid opens during a cycle
  • Common failure symptoms: washer won't start or spin, fills but stalls, stops intermittently, or displays "lid open" alerts
  • Restores proper cycle progression and safety shutoff when replaced
What's included: One lid switch Install notes:
  • Disconnect power and water supply before servicing
  • Access the switch from under the top panel/console per your model's procedure
  • Release the old switch, move the harness to the new switch, and secure wiring away from moving parts
  • Ensure the lid closes and actuates the switch before reassembly and test run

Do-It-Yourself Stories from Customers like You Direct drive motor coupling failed wouldn't agitate or spin   Tim H. • Fort Collins , CO • October 18, 2014

Was set to pull the trigger on a new washer since this one was 10+ years old. Broke a $25 lid switch fumbling to get the washer open before I found the appliancepros video library. Once I got things apart the right way I was able to diagnose the problem in 5 minutes. Identified the $10 part needed. Got the $10 coupling and the $25 switch and had the washer working like new in 20 minutes. I'm pretty proud of myself.. not going to tell anyone about the $25 switch. Read more

More
$115.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Wire Ring (1-1/8 In)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10083200

This 1-1/8 in wire retaining ring locks into a groove to secure components in place. It helps prevent parts from sliding off a shaft or shifting out of position so assemblies stay aligned and operate reliably.

  • Holds components on a shaft or within a groove to prevent axial movement
  • Maintains alignment of related parts in the assembly
  • Common failure signs: ring is bent, missing, or won't stay seated
  • Symptoms include loose or wobbly parts and rattling during operation
What's included: 1 wire ring (1-1/8 in) Installation notes:
  • Disconnect power before servicing
  • Wear eye protection—retaining rings can spring free during removal
  • Use appropriate snap-ring pliers or small picks to remove/install
  • Ensure the ring is fully seated in the groove before reassembly and use

Do-It-Yourself Stories from Customers like You Clothes not sinning dry enough   Edward B. • Ellisville , MO • March 07, 2016

Based on recommendation to replace the clutch if clothes aren't spinning dry enough, I ordered a new clutch. Upon disassembly, I observed no Ring Wire/C-Clip and that the bearing appeared worn. Where did the clip go? Well, the bearing wore down such that it wore out the clip and bearing up to the sleeve of the shaft. Knocked out the old bearing, tapped in the new and was done. I disassembled the brake shoes but believe you can get the bearing in and out without doing so. Not a bad job, just... Read more

More
$7.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Commercial Laundry Appliance Coin Box With Key
Genuine Whirlpool part
By: Whirlpool
Part Number: W11190039

This is a coin collection box designed for coin-operated commercial laundry machines. It slides into the coin mechanism housing and collects coins deposited by users, and it comes with a key for access. Replace this coin box if the key no longer works, the box is damaged or bent preventing proper insertion, or if coins are jamming or falling through due to wear.

Do-It-Yourself Stories from Customers like You Change collection box on our guest clothes dryer the lock had been jammed with something other than the correct key   Spencer P. • Ridgecrest , CA • November 04, 2014

I drilled old lock out and installed new lock box. This was the info your Tech had given me and as always your Techs are on top of all situations. This took about 15 minutes and it's back collecting money. Thanks for such quick and reliable service. The tracking info was a big help , keeping GM advised as to final repair , knowing when part would arrive. I again want to thank you for your reliable service and keeping me aware of where my part was and when I can install. Read more

More
$118.53

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw And Washer (8-18 X 5/16)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP355214

This screw-and-washer fastener is a factory-size 8-18 x 5/16 hardware piece used to secure appliance panels and components. Replace stripped, rusty, or missing hardware to restore a tight, rattle-free fit and proper alignment. What it does:

  • Fastens sheet-metal panels, brackets, and small components in the appliance cabinet
  • Replaces lost, stripped, or corroded screws to maintain secure mounting
  • Helps reduce vibration, buzzing, or rattling from loose parts
  • Useful when the original hardware is missing or no longer holds securely
What's included:
  • Includes 1 screw-and-washer fastener (8-18 x 5/16)
Install notes:
  • Disconnect power; shut off gas and water supplies if applicable
  • Match the fastener to the original location; sizes can vary by application
  • Start threads by hand to avoid cross-threading; use an appropriately sized driver
  • Tighten snugly without overtightening to prevent stripping sheet metal

Do-It-Yourself Stories from Customers like You Burners were leaking gas igniters didn't work   Christine B. • Meredith , NH • February 13, 2016

I removed the burners, which were rusted and needed some tapping.They were pretty stubborn to remove from the insert. I removed the spark igniters, which were rusted where they screwed into the burner and then removed the venturi tubes.. Once this was done, I installed the new igniters to the underside of the new burner. I then installed the burners, which only took simple placement and a quarter turn to lock them in. I then hooked up the igniter wire to the new spark igniters. The repair... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Vacuum Break Anti-Siphon Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3347034

Leaking from the water inlet connection? This vacuum break prevents backflow and maintains the air gap at the inlet. Easy DIY fix in under 30 minutes.

Do-It-Yourself Stories from Customers like You Wife noticed water on the laundry room floor!   Richard L. • Phelps , NY • April 06, 2015

Removed cover from Whirlpool washer (~20 years old) and found water to be leaking from hose connection at Break Vac. Obviously the hose had to be replaced but the Break Vac looked corroded and partially plugged, too, possibly inhibiting water flow. While the cabinet was off I noticed the Suspension Spring was rusted off so I ordered 1 of those, too. Total of all parts was under $45 so looks like we won't be getting a newer, more efficient washer anytime soon. Everything arrived in 3 days and... Read more

More
$50.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Motor Retainer Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10086010

Secures the motor to its mounting point in your laundry center. Replace if the retainer is worn, broken, or has lost tension to prevent motor misalignment.

Do-It-Yourself Stories from Customers like You Washing machine   Dan B. • Blueridge , GA • June 12, 2026

Replace motor hanger , grommets, and motor coupler Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Retainer Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: 285353

This retainer ring is a genuine OEM replacement part sourced directly from the manufacturer for use on front load washing machines to hold the boot seal in place. The boot seal is the gasket that seals the washing machine when the door is closed to prevent water from leaking. The retainer ring is located flush against the boot seal and has either a spring clamp or screw clamp that secures it. Over time, this ring may become damaged due to the washing machine's normal use and age. If the ring is not tight, the washing machine could leak when in use. If water is coming from the door, it is a good idea to inspect and replace the retainer ring and possibly the boot as well.Unplug the washing machine to prevent electrocution. Remove the front panel, the detergent dispenser, and the kickplate to access the retainer ring. Locate the clamp on the ring and loosen it. Remove the retainer ring and set it to the side. Inspect the boot and then install the new retainer ring. Tighten the clamp and reassemble the washing machine. This retainer ring is sold as an individual unit. It is designed specifically for washing machines manufactured by Whirlpool.

Do-It-Yourself Stories from Customers like You Washer would agitate but would not go into high spin sounded like spin was working though   Mario M. • Corona , CA • January 03, 2015

Im not a repairman, so all my knowledge to fix my washer came from either youtube or online chats. I posted this to help the next dad trying to save a few bucks. Door sensor... Since door sensor worked correctly, verified that by starting washer with door open, and agitate cycle would not start until door was closed. Meaning door sensor worked correctly. Timer... In high spin cycle washer sounded correcltly spinning, but when opening door, drum was was not moving. So timer was triggering... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Anti-Rattle Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516

Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.

Do-It-Yourself Stories from Customers like You No spin on spin cycle   Richard S. • Beaumont , CA • August 28, 2015

Replaced clutch assembly which was a little tricky, but very doable. Just make sure to take your time. I do have to say that I am very impressed with AppliancePartsPro customer service when the replacement part also failed. A new clutch assembly was at my door step a few days later. I now has a working washer again. Thanks Again Appliance Parts Pro. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator Drive Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: WP389387

Agitator won't move or slips during wash? A worn drive shaft causes weak agitation. This shaft transfers motion from the gearcase to restore firm engagement.

Do-It-Yourself Stories from Customers like You Agitator was not turning   Edward M. • Glen Allen , VA • March 10, 2019

I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more

More
$132.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Centerpost Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546455

Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.

More
$18.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Terminal Receptacle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62889

Used for lid switch.

Do-It-Yourself Stories from Customers like You Washer was "dead" with a partially washed load and would not do anything   Jimmy M. • Hopewell , VA • September 19, 2014

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Anti-Rattle Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355454

Replace your washer's anti-rattle clip to eliminate vibration noise and buzzing during cycles. Secures components with light spring tension. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Connector Housing (3-Circuit)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2172937

This three-circuit connector housing organizes and protects terminals in an appliance wiring harness. It provides a secure, insulated plug connection to help prevent loose contacts, heat damage, and intermittent operation when the original housing is cracked or melted. What it does:

  • Holds three wiring terminals in the correct orientation for a mating connector
  • Insulates and locks terminals to reduce arcing and overheating at the plug
  • Replaces cracked, brittle, or heat-damaged connector housings
  • Symptoms can include intermittent power, burnt odor near the connector, discoloration/melting, or a plug that won't stay latched
What's included:
  • 1 three-circuit connector housing
Install notes:
  • Disconnect power before servicing the appliance
  • Note wire/terminal positions and transfer them one at a time into the new housing
  • Inspect terminals; replace any that are discolored, loose, or damaged. Use the correct crimp tool/terminals specified for your model
  • Fully seat each terminal until it locks and the connector latch engages securely

More
$13.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Fill Hose Rubber Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16123

Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water inlet valve was corroded and broken washer   Sandra H. • Belton , MO • June 26, 2015

Replaced with new part ordered from store Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Lid Hinge Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21097

Cushioning pad that installs between the washer lid hinge and cabinet. Replace if cracked, worn, or missing to reduce squeaks and prevent metal wear.

Do-It-Yourself Stories from Customers like You Cracked lid on a whirlpool cabrio washer   Doug P. • Kansas City , MO • September 05, 2015

Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google